WHAT DID YOU DO TO YOUR BRZ TODAY?

[CIAGDDS]

Originally Posted by idanvan

Can you post a picture of this please?

At first I used the 12v Accessory Plug from the glove box. Since that worked great, I bought the plug from Lowes as described and shown in this thread:

http://www.ft86club.com/forums/showt...lug+sound+tube

[zinzan]

Originally Posted by CoolBReeZe

Was searching when you made this reply. I didn't find any detailed adjustment instructions ... I just adjusted one parameter at a time until I got the lines where I wanted them.

Ok, that's cool. Wish there was a way to make the grid spread a bit wider, to more closely align with the width of the car.

[FLYFISHR]

Originally Posted by BRZNutt

Installed this:


Toyota Part number is: 78101-20150. (Do yourself a favor and get a proper punch to install this. I was able to knock the pin out and press it back in with some rather crude methods and improper tools. A punch would have been nice. Crazy thing is, I was just at the hardware store before I got home and found this in the mail. Too excited to wait or go get the right tool.)

What would be the right tool for the job?

[lxs]

I ordered swift springs online today yes, I did that for you, BRZ

[BRZNutt]

Originally Posted by FLYFISHR

What would be the right tool for the job?

A roll pin punch.



http://www.harborfreight.com/5-piece...set-93111.html

[CoolBReeZe]

Originally Posted by zinzan

Ok, that's cool. Wish there was a way to make the grid spread a bit wider, to more closely align with the width of the car.

Completely agree. Nevertheless, the camera provides much greater comfort when backing from my driveway or a parking spot.

[zinzan]

Originally Posted by CoolBReeZe

Completely agree. Nevertheless, the camera provides much greater comfort when backing from my driveway or a parking spot.

Absolutely.

I almost always roll down my driver's side window and stick my head out when I'm backing up, so I've got a good view of that side of my car. I park in a garage at work, and once backed into a spot, got out, and found the bumper about a fingernail's width away from a concrete wall, and knew I needed the backup camera installed ASAP (had it sitting in the box a couple weeks).

While I might be tempted to remove the grid lines if we had that capability, they do help me backup with confidence, knowing exactly when I'm within 24" of the wall.

-Z

[CoolBReeZe]

Originally Posted by zinzan

Absolutely.

I almost always roll down my driver's side window and stick my head out when I'm backing up, so I've got a good view of that side of my car. I park in a garage at work, and once backed into a spot, got out, and found the bumper about a fingernail's width away from a concrete wall, and knew I needed the backup camera installed ASAP (had it sitting in the box a couple weeks).

While I might be tempted to remove the grid lines if we had that capability, they do help me backup with confidence, knowing exactly when I'm within 24" of the wall.

-Z

[Deepseadiver]

Originally Posted by idanvan

Finally debadged the rear emblems. MUCH cleaner look.





Then installed my STI replica kit from JonMotoring. Great fitment. Can second that the double sided tape that is included is not the best. I went ahead and used 3M VBH tape and it was flawless.

Looks Great! I am ordering the same kit today. Did you paint the Sti kit parts? Do you need to?

[Figo]

Order my new rims 2 weeks ago from Prime Motoring, and still waiting for them.

It might take another 4-6 weeks.

They will be shipped from Japan cuz they are not in stock in the United States.


.

[Sirsimon]

Today I resisted spending a lot more money. A loss in some people's book. A win in my book, as I really want to get the ***ch out on my first track day before spending much more $. I will probably buy a header before then (alright planned on it), but in my opinion, driving instruction/HPDE is vastly more useful than more "stuff". ;-)

I'm totally envious of all your parts, by the way. Lucky bastards. :-)

[Monoman]

Quote:
Originally Posted by chanomatik
How difficult was the backup camera? I've debated getting one for a loooonnnng time.

Very easy. I found everything I needed to know on these forums. I think the camera, adapter, and tools were around $130. Here are all of the links I saved in my notes.

• Rydeen Duo backup Camera discussion/directions - http://www.ft86club.com/forums/showt...t=17020&page=8
• Rydeen Duo “ZH07-150B” - http://www.rydeenmobile.com/Backup%2...upCameras.html
• Adapter for camera to stock radio - http://ae64.com/Ordering.htm
• Trim removal tools - [ame="http://www.amazon.com/No-Scratch-Tools-Removing-Fastener-Molding/dp/B000LNBLTK/"][/ame] [ame="http://www.amazon.com/No-Scratch-Tools-Removing-Fastener-Molding/dp/B000LNBLTK/"]Amazon.com: 5 pc. No-Scratch Tools for Removing Fastener & Molding: Automotive[/ame]
• Install instructions: http://www.ft86club.com/forums/showthread.php?t=32452
• Install instructions from ae64.com for adapter: http://ae64.com/Rear-camera-install-16p-FT.htm

I have these wider angle mirrors on the way: http://www.rexpeed.net/2012/en/produ...php?serial=335 The camera and mirrors are probably the very first mods to consider.

Edit: the only part that isn't really easy is running the wire from the trunk lid to the trunk through the rubber tube. Be patient and get a second set of hands if you can.

[leicaboss]

Yet another alignment...

Sent from my SAMSUNG-SGH-I337 using Tapatalk

[BRZNutt]

Installed my summer setup. Enkei Racing PF01 Black 17x8 45mm offset & Continental ExtremeContact DW 225/45ZR17