TheHapaOne's CBS BRZ Limited

[Turkish]

Originally Posted by thehapaone

Ordered them from Carson Toyota they are the Australia base model bezel and buttons

Interesting, do you happen to still have the part #'s?

[Fresh86]

Impressive!

[thehapaone]

Originally Posted by Turkish

Interesting, do you happen to still have the part #'s?

can't remember off the top of my head they are posted somewhere on the forums under black out interior or something...I still need to finish doing that

http://www.ft86club.com/forums/showt...=22352&page=24 the part numbers are here

[thehapaone]

Finished my interior black out with the Steering Wheel, vent rings, kick pad accent, and door handles

[thehapaone]

Header arrived last week putting it on tonight, also picked up a Perrin cold air intake and oil cooler which should be going on within the next couple weeks.

On top of that stuff I'll be picking up some DBA T2 rotors sometime soon to replace my trashed OEM rotors and will be pairing those with some HAWK HPS brake pads

[thehapaone]

After 4 hours, a seized bolt, a dropped jack stand, bolt cutters, forgetting to plug the O2 sensor in, and much sweat and blood my header is finally installed...Unfortunately I was so dead by the time it was finally bolted up I completely forgot to take any pictures thanks @stockysnail and @kevintcao for all the help I'll get pics up when I eventually put in my cold air intake and oil cooler

[stockysnail]

Originally Posted by thehapaone

After 4 hours, a seized bolt, a dropped jack stand, bolt cutters, forgetting to plug the O2 sensor in, and much sweat and blood my header is finally installed...Unfortunately I was so dead by the time it was finally bolted up I completely forgot to take any pictures thanks @stockysnail and @kevintcao for all the help I'll get pics up when I eventually put in my cold air intake and oil cooler

Feel free to use my help on the oil cooler and intake since I did those myself as well. You're welcome and I hope you enjoy it.

[akahenry]

No videos or sound clips after FT86 Catted UEL installation, how dare you.

[thehapaone]

Originally Posted by akahenry

No videos or sound clips after FT86 Catted UEL installation, how dare you.

Uploading interior sound clip right now its raining so I will do exterior when it gets a little nicer

Edit Here have your shitty sound clip

[ame="http://www.youtube.com/watch?v=ElCIsr1fP4E"]Shitty Quality short sound clip of ft86SpeedFactory UEL Catted Header - YouTube[/ame]

[akahenry]

Originally Posted by thehapaone

Uploading interior sound clip right now its raining so I will do exterior when it gets a little nicer

Edit Here have your shitty sound clip

Oh wow, not bad! I thought it'd be drone-y in the cabin. I'm surprised. Now for the drive bys!

[thehapaone]

Cold air intake and oil cooler went on today...thankfully no seized bolts and everything went smoothly even with the crowd of @Touge_ninja, @DarrenDriven, and @NickFRS watching

[NickFRS]

To bad I couldn't stay longer. Happy wife happy life! I was also dead tired.....

How did the install turn out?

[thehapaone]

Originally Posted by NickFRS

To bad I couldn't stay longer. Happy wife happy life! I was also dead tired.....

How did the install turn out?

went really smoothly...had done an oil cooler before so it wasn't bad at all

[NickFRS]

Originally Posted by thehapaone

went really smoothly...had done an oil cooler before so it wasn't bad at all

Very nice. do you have a way of mesuring temps? Interested to see your R&D since you track.