OFFICIAL: Enkei RPF1 Wheel Thread - Page 4 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

VuDism · 03-18-2014, 11:31 AM

Quote:

Originally Posted by Wise

What hubcentric rings is everyone running?

I'm looking at a set to suit the 17x9 +35's/

[ame="http://www.amazon.com/gp/product/B002809U9C/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1"]Amazon.com: Gorilla Automotive 73-5615 Wheel Hub Centric Rings (73mm OD x 56.15mm ID) - Pack of 4: Automotive[/ame]

wparsons · 03-18-2014, 12:21 PM

No rings on mine, if you tighten the lugs properly you shouldn't need them.

Squishy86 · 03-18-2014, 12:43 PM

Quote:

Originally Posted by Obcemane53

Size: 18 x 9.5
Offset: +38
Color: SBC
Tires: Continental ExtremeContact DW
Tire Size: 245/35/18
Drop: Eibach Sportline

That Stillen kit is beautiful.

nickmaster · 03-18-2014, 01:13 PM

Size: 17x9
Offset: +35
Color: Silver
Tires: Dunlop Direzza ZII
Tire Size: 245/40/17
Drop: Stock

pleong · 03-18-2014, 05:17 PM

Size: 18x9.5
Offset: +38
Color: Gunmetal
Tires: Hankook Ventus R-S3
Tire Size: 265/35/18
Drop: KWV3

2isballer · 03-18-2014, 05:48 PM

Quote:

Originally Posted by pleong

Size: 18x9.5
Offset: +38
Color: Gunmetal
Tires: Hankook Ventus R-S3
Tire Size: 265/35/18
Drop: KWV3

Wow. 265 is pretty wide. Any rubbing issues on this setup?

pleong · 03-18-2014, 05:56 PM

Quote:

Originally Posted by 2isballer

Wow. 265 is pretty wide. Any rubbing issues on this setup?

Yeah, I had the fenders pulled on all four corners. At the front the only time it rubs is at full wheel lock, but i don't mind it bc i don't need to turn that much at the track and i rarely do on the street. At the rear I rubbed a little on the fender liner after the pull so i cut away whatever area it touched (only about an 1.25 inches wide and about a foot long), no issues now.

VuDism · 03-19-2014, 01:43 PM

Quote:

Originally Posted by leicaboss

Wait a second...

18 x 9.5 RPF1's in +38...

Does that fit a car sitting on springs (Swift springs, stock struts)? I was originally only considering the 17 x 9 +35 wrapped with 245/40/17.

It all depends what you want. You can likely run 18x9.5 +38 with stock struts but you may not have room to dial in as much camber as 17x9 +35 before you rub the strut... so 18x9.5 might poke a tiny bit more than 17x9 with stock struts.

18s look nice... but it depends what you want out of your car. I chose 17x9 because the 17s are over 2 lbs lighter than the 18s.

My car lost over 4lbs rotational weight per corner with my Rpf1 and tire setup vs stock setup

raul · 03-19-2014, 02:05 PM

Size: 17x8
Offset: +45
Color: Bronze
Tires: Bridgestone RE-11A
Tire Size: 245/40/17
Drop: Feal 441 -1.4"

leicaboss · 03-19-2014, 02:12 PM

Quote:

Originally Posted by VuDism

It all depends what you want. You can likely run 18x9.5 +38 with stock struts but you may not have room to dial in as much camber as 17x9 +35 before you rub the strut... so 18x9.5 might poke a tiny bit more than 17x9 with stock struts.

18s look nice... but it depends what you want out of your car. I chose 17x9 because the 17s are over 2 lbs lighter than the 18s.

My car lost over 4lbs rotational weight per corner with my Rpf1 and tire setup vs stock setup

For those same reasons, I'm basically 95% set with the 17x9 +35. What camber settings are you running F/R? I'll have camber bolts (SPC) and LCA (SPC), lowered on Swifts, 1".

VuDism · 03-19-2014, 02:24 PM

Quote:

Originally Posted by leicaboss

For those same reasons, I'm basically 95% set with the 17x9 +35. What camber settings are you running F/R? I'll have camber bolts (SPC) and LCA (SPC), lowered on Swifts, 1".

My rear is whatever it was after the car was lowered. I think it was ~ -2.0. The front I just maxed out the 16mm whiteline camber bolts...I'm thinking it is about -1.6 or so Unfortunately I won't know Exactly because when i got the alignment done they refused to set my front camber the way I wanted. So I told them to just align my car to factory specs and I went home and adjusted the camber bolts.

was385 · 03-19-2014, 05:24 PM

Quote:

Originally Posted by pleong

Size: 18x9.5
Offset: +38
Color: Gunmetal
Tires: Hankook Ventus R-S3
Tire Size: 265/35/18
Drop: KWV3

For a color I had doubts about when I was ordering my wheels, every time I see gunmetal RPF1s I love them more and more.

JS + BRZ · 03-19-2014, 06:00 PM

I do love Gunmetal RPF1s. If anything, I'll PC mine if I ever get bored of my wheels.

BenBrown · 03-19-2014, 08:05 PM

Quote:

Originally Posted by pleong

Size: 18x9.5
Offset: +38
Color: Gunmetal
Tires: Hankook Ventus R-S3
Tire Size: 265/35/18
Drop: KWV3

where did you get those gun metal rpf1s in 18x9.5?? cant find them anywhere.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wheel Directory: Enkei RPF1 17x9.0 +35	D1cker	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	801	06-18-2024 07:31 AM
Wheel Directory: Enkei RPF1 18x9.5 +38	FRS8SIX	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	297	02-15-2018 04:50 PM
Enkei RPF1 18x9.5 5x100 38mm Offset Black Wheel - Exclusive Tony Angelo Edition Wheel	Infamous Performance	Wheels and Tires	122	02-13-2014 12:34 PM
Enkei RPF1 17x7.5 +48 5x100 SBC and wheel/tyre question	Victor Draken	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	4	12-19-2013 02:28 PM
Track wheel Enkei RPF1 in 16" ??	stockysnail	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	42	08-07-2013 10:13 AM

03-18-2014, 01:13 PM	#46
nickmaster me Join Date: Jan 2013 Drives: FR-S Location: USA Posts: 43 Thanks: 8 Thanked 13 Times in 8 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Size: 17x9 Offset: +35 Color: Silver Tires: Dunlop Direzza ZII Tire Size: 245/40/17 Drop: Stock

03-18-2014, 05:17 PM	#47
pleong Senior Member Join Date: Nov 2012 Drives: 2013 Whiteout FR-S Location: Texas Posts: 815 Thanks: 163 Thanked 273 Times in 146 Posts Mentioned: 23 Post(s) Tagged: 0 Thread(s)	Size: 18x9.5 Offset: +38 Color: Gunmetal Tires: Hankook Ventus R-S3 Tire Size: 265/35/18 Drop: KWV3

03-19-2014, 06:00 PM	#55
JS + BRZ Banned Join Date: Dec 2013 Drives: 2010 MS3 Location: Los Angeles Posts: 1,820 Thanks: 1,180 Thanked 1,161 Times in 597 Posts Mentioned: 18 Post(s) Tagged: 0 Thread(s)	I do love Gunmetal RPF1s. If anything, I'll PC mine if I ever get bored of my wheels.

User Name		Remember Me?
Password