Another Nexus 7 install: Clean and Easy - Page 6 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Sojhinn · 03-19-2014, 10:22 AM

Quote:

Originally Posted by ratters

Still couldn't get it to fit properly, so I ended up cutting the back cover of my tablet to make it fit.

I also bought a JVC KD-X250BT head unit, which allows me to control the head unit functions via bluetooth on my phone. I can control the source, volume, equaliser. That way I don't need to mess around with all that Arduino stuff.

Curious if my x50 works with the same app. What is it called?

ratters · 03-19-2014, 06:27 PM

Quote:

Originally Posted by Sojhinn

Curious if my x50 works with the same app. What is it called?

It's called JVC Smart Music Control, you should be able to find it on the Play Store if you have an Android phone.

Sent from my C6903 using Tapatalk

JS + BRZ · 03-19-2014, 07:46 PM

Very cool.

Too bad I'll never be able to do DIY like this.

Sojhinn · 03-19-2014, 08:08 PM

Quote:

Originally Posted by JS + BRZ

Very cool.

Too bad I'll never be able to do DIY like this.

You can. it's really easy. If you need help we can all help.

dz93 · 03-19-2014, 11:22 PM

received my USB DAC today.
it gives nothing but static. i had a feeling it wouldnt work
however the audio controls work. Volume, mute etc.

i had the otg cable into the nexus, DAC into usb and the power cord charging it from laptop and also tried from wall charger.

should i just buy another one,
or any other suggestions?

EDIT: just bought this
http://www.ebay.com.au/itm/USB-2-0-t...dd9c233&_uhb=1

and this
http://www.ebay.com.au/itm/USB-2-0-t...2531e4f&_uhb=1

figured one of them should work

Sojhinn · 03-19-2014, 11:39 PM

Double post.

Sojhinn · 03-19-2014, 11:44 PM

Quote:

Originally Posted by dz93

received my USB DAC today.
it gives nothing but static. i had a feeling it wouldnt work
however the audio controls work. Volume, mute etc.

i had the otg cable into the nexus, DAC into usb and the power cord charging it from laptop and also tried from wall charger.

should i just buy another one,
or any other suggestions?

EDIT: just bought this
http://www.ebay.com.au/itm/USB-2-0-t...dd9c233&_uhb=1

and this
http://www.ebay.com.au/itm/USB-2-0-t...2531e4f&_uhb=1

figured one of them should work

Did you try it on your computer?

Sojhinn · 03-19-2014, 11:46 PM

Also if those don't work I'll buy a good one and send it to you.

ratters · 03-20-2014, 01:06 AM

I bought a Behringer UCA202 USB DAC for my set up - works great.
Cost me 50 bucks though.

Sent from my C6903 using Tapatalk

dz93 · 03-20-2014, 02:24 AM

Quote:

Originally Posted by Sojhinn

Did you try it on your computer?

Yeah tried it in the computer.
Yeah that would be handy if you could do that.
But we shall see how these turn out.
There wasn't anything special you had to do right?
Should just be plug and play.

Sojhinn · 03-20-2014, 10:10 AM

Quote:

Originally Posted by dz93

Yeah tried it in the computer.

Yeah that would be handy if you could do that.

But we shall see how these turn out.

There wasn't anything special you had to do right?

Should just be plug and play.

Was it working when you plugged it in to your computer? You should get audio.

And nope just connect it to the otg usb port and you are good.

dz93 · 03-20-2014, 10:32 AM

Quote:

Originally Posted by Sojhinn

Was it working when you plugged it in to your computer? You should get audio.
.

Didn't work in the computer. It installed drivers and everything fine, when plugged in the audio stopped coming out of laptop speakers as if it were going to the DAC but all i was hearing was static like i said before.
I dont care that it doesnt work, i just care that my next one does.

i might eventually be buying a audison bit10 processor.

Sojhinn · 03-20-2014, 11:12 AM

Quote:

Originally Posted by dz93

Didn't work in the computer. It installed drivers and everything fine, when plugged in the audio stopped coming out of laptop speakers as if it were going to the DAC but all i was hearing was static like i said before.

I dont care that it doesnt work, i just care that my next one does.

i might eventually be buying a audison bit10 processor.

Wow that might explain why it didn't work in the nexus. Can you return it?

dz93 · 03-20-2014, 07:58 PM

i probably could return it, i'll email them. but if it involves me posting it back im not going to.
was only a few dollars, not worth my time and effort to me.
guess i'll just have to wait for my next ones.

03-19-2014, 11:39 PM	#76
Sojhinn Lightning McQueen Driver Join Date: May 2012 Drives: Limited Red 6MT BRZ Location: San Diego Posts: 2,242 Thanks: 753 Thanked 1,167 Times in 644 Posts Mentioned: 77 Post(s) Tagged: 2 Thread(s)	Another Nexus 7 install: Clean and Easy Double post. __________________ Nicknamed Lightning by my Kids. Installed Mods: Phantom Electric Super Charger \| Open Flash Tune \| Perrin OP/ HFC Front pipe \| Invidia Q300 catback \| ST Suspension \| JDL Header \| Flex Fuel

03-19-2014, 11:46 PM	#78
Sojhinn Lightning McQueen Driver Join Date: May 2012 Drives: Limited Red 6MT BRZ Location: San Diego Posts: 2,242 Thanks: 753 Thanked 1,167 Times in 644 Posts Mentioned: 77 Post(s) Tagged: 2 Thread(s)	Also if those don't work I'll buy a good one and send it to you. __________________ Nicknamed Lightning by my Kids. Installed Mods: Phantom Electric Super Charger \| Open Flash Tune \| Perrin OP/ HFC Front pipe \| Invidia Q300 catback \| ST Suspension \| JDL Header \| Flex Fuel

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Well that was easy...	FRyeS	Scion FR-S / Toyota 86 GT86 General Forum	17	10-15-2013 12:04 PM
Nexus 7 in FR-S/BRZ	DjDATZ	Electronics \| Audio \| NAV \| Infotainment	4	06-09-2013 09:10 PM
Nexus 7 Car Audio DIY	thejevans	Electronics \| Audio \| NAV \| Infotainment	32	05-10-2013 04:55 PM
How easy/difficult is it to keep WRB "clean"?	ayau	Cosmetic Maintenance (Wash, Wax, Detailing, Body Repairs)	32	06-17-2012 11:17 PM

03-19-2014, 07:46 PM	#73
JS + BRZ Banned Join Date: Dec 2013 Drives: 2010 MS3 Location: Los Angeles Posts: 1,820 Thanks: 1,180 Thanked 1,161 Times in 597 Posts Mentioned: 18 Post(s) Tagged: 0 Thread(s)	Very cool. Too bad I'll never be able to do DIY like this.

03-19-2014, 11:22 PM	#75
dz93 Member Join Date: Feb 2014 Drives: toyota 86 Location: australia Posts: 46 Thanks: 1 Thanked 11 Times in 8 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	received my USB DAC today. it gives nothing but static. i had a feeling it wouldnt work however the audio controls work. Volume, mute etc. i had the otg cable into the nexus, DAC into usb and the power cord charging it from laptop and also tried from wall charger. should i just buy another one, or any other suggestions? EDIT: just bought this http://www.ebay.com.au/itm/USB-2-0-t...dd9c233&_uhb=1 and this http://www.ebay.com.au/itm/USB-2-0-t...2531e4f&_uhb=1 figured one of them should work

03-20-2014, 01:06 AM	#79
ratters Member Join Date: Feb 2014 Drives: Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I bought a Behringer UCA202 USB DAC for my set up - works great. Cost me 50 bucks though. Sent from my C6903 using Tapatalk

03-20-2014, 07:58 PM	#84
dz93 Member Join Date: Feb 2014 Drives: toyota 86 Location: australia Posts: 46 Thanks: 1 Thanked 11 Times in 8 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	i probably could return it, i'll email them. but if it involves me posting it back im not going to. was only a few dollars, not worth my time and effort to me. guess i'll just have to wait for my next ones.

User Name		Remember Me?
Password