Official OpenFlash Tablet FA20 Tuning Tech Discussion Thread

[Shiv@Openflash]

Originally Posted by cjsporl1996

I posted the bin file so people didn't have to go through the same hassle I had to go through. I asked shiv if he wanted the post removed than I would simple remove it. I don't think I did any wrong.

The idea behind not releasing a (free) beta supercharger tune in .bin format was for the protection of end users. Not to pad my pockets or to make anyone's life more difficult. The idea only only releasing it, in .dev file, to individual via email (as opposed to posting it, in .bin format, on our website for public download) was so that I could ensure that it was used in vehicles with the correct hardware (standard Vortech MAP sensor, standard 9psi pulley, etc.) This is extra work for us but I don't like to see our customers make expensive mistakes.

Shiv

[Luckrider]

Originally Posted by shiv@vishnu

The idea behind not releasing a (free) beta supercharger tune in .bin format was for the protection of end users. Not to pad my pockets or to make anyone's life more difficult. The idea only only releasing it, in .dev file, to individual via email (as opposed to posting it, in .bin format, on our website for public download) was so that I could ensure that it was used in vehicles with the correct hardware (standard Vortech MAP sensor, standard 9psi pulley, etc.) This is extra work for us but I don't like to see our customers make expensive mistakes.

Shiv

To be fair, someone has to go out of their way to obtain this. I am not going to lie, I did download the file and sent it to myself in case it gets pulled and I feel extra smart for a short while, smart enough to try and make sense of the changes made.

[cjsporl1996]

@shiv@vishnu

I pulled the file...

[s2d4]

Originally Posted by leicaboss

There's a reason why it's unreleased... there's also a reason why the OFT team didn't post it themselves. There's also a reason why I'm not surprised in how you handled this situation - oh wait, you're probably 18 years old*. Learn some patience for God's sake.

*1996, your birth year.

Edit: FYI, I understand your good will behind this, just sayin' I can understand the frustration of the guys behind the tune... that's all.

There was no good will, it was intentional.
http://www.ft86club.com/forums/showthread.php?t=60864

[Captain Insano]

Originally Posted by cjsporl1996

I posted the bin file so people didn't have to go through the same hassle I had to go through. I asked shiv if he wanted the post removed than I would simple remove it. I don't think I did any wrong.

Wow... Shiv has ALOT of patience. I would be pretty pissed off if I was him right now.

[cjsporl1996]

@shiv@vishnu shiv my afr is at 14-15 on the oft300 tune 2.5 bar map sensor. Any suggestions?

[Malt]

Originally Posted by cjsporl1996

@shiv@vishnu shiv my afr is at 14-15 on the oft300 tune 2.5 bar map sensor. Any suggestions?

You seriously expect help from Shiv after the stunt you pulled? This is why people feel the way they do about your generation. No apology, no remorse, just a sense of entitlement.

[Captain Insano]

Lol... and it just keeps going. Have you at least volunteered to pay his company for an etune? I bet you haven't.

Why do you think you are so special that Shiv should help you with an unreleased map for a kit that you didn't buy from him and you have mismatched sensors on?? For god sakes send him private messages for your ridiculous requests from this point forward. You should be embarrassed man.

[leicaboss]

Originally Posted by s2d4

There was no good will, it was intentional.
http://www.ft86club.com/forums/showthread.php?t=60864

My mistake, was just trying to be nice. You're right on his sense of entitlement - again the kid's 18 and has a supercharged BRZ. Pretty plain he's used to getting whatever he wants at a moment's notice...

[Sniper2606]

Shiv just sent me a Vortech tune today with my new OFT.

I had ecutek.

Let me tell you the car is a monster now i cannot believe the difference.

I have to hand it down to you shiv@vishnu.

Amazing results.

[Kodename47]

Originally Posted by cjsporl1996

@shiv@vishnu shiv my afr is at 14-15 on the oft300 tune 2.5 bar map sensor. Any suggestions?

The map sensor really shouldn't make that big of a difference.


Where are you running that lean? If it's cruising/idle then that's fine. PM me if you want....

[EAGLE5]

14:1 means a lot of air and not enough fuel. You could rescale the MAF sensor or add more fuel to the fueling tables. At 14:1, I believe you're in danger of lean knock, a dead engine. and a whole lot of unhappiness. You should also apologize to Shiv. You should be specific in the apology.

[Sniper2606]

Originally Posted by Kodename47

The map sensor really shouldn't make that big of a difference.


Where are you running that lean? If it's cruising/idle then that's fine. PM me if you want....

My afr at idle is at 14. With vortech

[Roadstercycle]

Hi Just received my OFT today and can't find how to go back to stock with my EcuTek cable. I have the stock tune of course I just don't remember where the thread is to do it. A little help please. I know it's here somewhere, I've been typing in search questions for a 1/2 hour with no luck.