OpenFlash Tablet v1.55b: BIN files added!

[brn12345]

Originally Posted by shiv@vishnu

I think he is using a ecuflash instead. $5 he will get an OFT after the next map release

Come on Shiv! You have to give us a hint, I have been chasing and trying to find out more ever since you let slip "New file size in the next update". Something must be up your magic tuning sleeve and us loyal followers deserve to know!

[makinen]

Originally Posted by Yobiwan

last one is KN filter + LW pulley + LW flywheel + LW driveshaft 179ps/19.50kgm (176.7hp/141lbft)

Oh, mine is here!
4.5 FD also.

I'm waiting A01E rom tuned.

[troek]

finally got my OFT in, and my rom type isnt on the list . sent shiv the file, cant wait till i get this baby up and running.

[transition]

Just went over to @MAPerformance for a baseline run tonight before i start a few NA mods.

Run 1 & 2 completely stock
Run 3 1.55b stage 1 map



Thanks to Jordan, Ian and Drew over at @MAPerformance

[Shiv@Openflash]

Originally Posted by transition

Just went over to @MAPerformance for a baseline run tonight before i start a few NA mods.

Run 1 & 2 completely stock
Run 3 1.55b stage 1 map



Thanks to Jordan, Ian and Drew over at @MAPerformance

Looks good. But it's better to dyno a fully adapted tune instead of flashing it on the dyno and doing a pull. It takes a bit of driving for the fuel trims to adjust to +3.91% at high rpm. Without this extra fuel, you'll be down a few hp up top.

[MAPerformance]

Originally Posted by transition

Just went over to @MAPerformance for a baseline run tonight before i start a few NA mods.

Run 1 & 2 completely stock
Run 3 1.55b stage 1 map



Thanks to Jordan, Ian and Drew over at @MAPerformance

Good to meet you man. Nice midrange gains there. I can't wait to see the results with the header. I think its going to be a perfect N/A set up.

[Nardi330]

just got my OFT.

just wondering if Australia spec manual car uses A01G roms?

thanks.

[steve99]

Originally Posted by Nardi330

just got my OFT.

just wondering if Australia spec manual car uses A01G roms?

thanks.

If you have a BRZ manual 2013/14 its likely A01G rom if yor rom type is not supported send a copy to shiv and he will sort it out for you


The info button on oft will tell ypu

[Shiv@Openflash]

Originally Posted by Nardi330

just got my OFT.

just wondering if Australia spec manual car uses A01G roms?

thanks.

We do support G series ROMs from Aussie spec cars. Not a problem

[akyp]

If you have an OBDII bluetooth dongle, you can read your car's cal ID.

[Victor Draken]

Any chance we will ever see 93oct OTS Maps?

[steve99]

Originally Posted by Victor Draken

Any chance we will ever see 93oct OTS Maps?

hi Victor,

The oft tunes are for 93 aki 98 ron fuel to get maxium benifit , they will run on 91 aki 95 ron but will be less power due knock retard and IAM droping to 0.6 or so to compensate

On 93 aki 98 ron or better IAM should be 1.

you could always run e85

[Victor Draken]

Originally Posted by steve99

hi Victor,

The oft tunes are for 93 aki 98 ron fuel to get maxium benifit , they will run on 91 aki 95 ron but will be less power due knock retard and IAM droping to 0.6 or so to compensate

On 93 aki 98 ron or better IAM should be 1.

you could always run e85

Ahahah I wish I could. I'm from europe E85 is not an option here unless in some places and Italy is not one of them.

[Nardi330]

Originally Posted by steve99

If you have a BRZ manual 2013/14 its likely A01G rom if yor rom type is not supported send a copy to shiv and he will sort it out for you


The info button on oft will tell ypu

Thanks for your help.

Mine is a 2012 June built 86 manual.

I'm just a little unsure as my car had a ECUTEK flash. That wouldn't matter what type of rom my car has?

After reading my "stock" rom (supplied by my ECUTEK tuner), OFM reads the CAL being ZA1JA01G. Does this CAL change with the type of rom I previously had or it is fixed with my type of ECU. This is confusing me as I lost my stock rom from Toyota.

Thanks in advance.