Nameless Performance Equal Length Stepped Header - Page 231 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

gonzo · 02-05-2014, 04:45 PM

I need some opinions: I have the nameless axle back and catted front pipe without the over pipe in 2.5 inch. I plan on supercharging in about two years. Should I get the 2.5 inch or 3 inch header now? If I get the 3 inch header now will it fit to my current nameless 2.5 inch catted front pipe and axle back?

FR-S Matt · 02-05-2014, 04:48 PM

Quote:

Originally Posted by gonzo

I need some opinions: I have the nameless axle back and catted front pipe without the over pipe in 2.5 inch. I plan on supercharging in about two years. Should I get the 2.5 inch or 3 inch header now? If I get the 3 inch header now will it fit to my current nameless 2.5 inch catted front pipe and axle back?

It will. Just need a gasket. Flange sizes are the same, just the inner piping is bigger.

Decay107 · 02-05-2014, 05:01 PM

Quote:

Originally Posted by FR-S Matt

It will. Just need a gasket. Flange sizes are the same, just the inner piping is bigger.

I was under the impression that all the headers were going to be 3" piping, but there would be either a 2.5" or 3" gasket.

Dustin · 02-05-2014, 05:26 PM

Quote:

Originally Posted by Decay107

I was under the impression that all the headers were going to be 3" piping, but there would be either a 2.5" or 3" gasket.

This is correct.

Ryan@Nameless · 02-06-2014, 01:30 PM

More header building progress pics for you all

-Ryan @ Nameless

swift996 · 02-06-2014, 01:57 PM

Quote:

Originally Posted by Ryan@Nameless

More header building progress pics for you all
-Ryan @ Nameless

Looking forward to seeing some finished pics.

WatchmaN · 02-06-2014, 06:01 PM

So anybody knows if it will fit with a vortech setup?

Calum · 02-06-2014, 06:22 PM

Quote:

Originally Posted by WatchmaN

So anybody knows if it will fit with a vortech setup?

Mad_Mike · 02-06-2014, 06:29 PM

Quote:

Originally Posted by raven1231

Come on man....You're being ridiculous. Give them time. Quality companies who produce headers crafted by Sauron takes time

. I say they will have them on the dyno sometime before the next millennium

One header to rule them all, One company to make them, One welder to bring them all and in the darkness bind them.

WatchmaN · 02-06-2014, 06:50 PM

Quote:

Originally Posted by Calum

And what happen when you did? did you find anything? me? no that's why i'm asking.

FrsDuke · 02-06-2014, 06:56 PM

Quote:

Originally Posted by WatchmaN

And what happen when you did? did you find anything? me? no that's why i'm asking.

Ryan answered the question ONE page ago on this very thread.

They have tested it with the innovate, but have not test fit any other sc yet.

StormTrooper · 02-06-2014, 06:56 PM

not sure if this has been covered or not. Do you guys offer a warranty for this header, and for how long?

Thanks

mad_sb · 02-06-2014, 07:15 PM

Quote:

Originally Posted by Ryan@Nameless

More header building progress pics for you all
...

-Ryan @ Nameless

You guys should tig the serial number on them as you finish the first batch... that way i can brag about having header #2 and the guy in front of me can brag about having header #1

FrsDuke · 02-06-2014, 08:03 PM

They have a new laser... I'd love everyone's signature on mine

02-06-2014, 06:01 PM	#3227
WatchmaN Senior Member Join Date: Jul 2012 Drives: the girls crazy Location: Anjou Posts: 276 Thanks: 160 Thanked 95 Times in 69 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	So anybody knows if it will fit with a vortech setup? __________________ Vortech SC(314hp/226tq), Perrin pully, Tanabe strut tower bar, Perrin exhaust, LP Tune, hsd coilovers, DTC-60 fr, hp+rear),track rubber RS3 and Continental :-), Forester oem oil cooler,Custom brake cooling kit. Driveway lab rear diffuser, Wasp front spliter, TRD canard/fenders.

02-06-2014, 08:03 PM	#3234
FrsDuke Fanboy Join Date: Dec 2013 Drives: 2013 ultramarine frs Location: Tx Posts: 612 Thanks: 242 Thanked 337 Times in 203 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	They have a new laser... I'd love everyone's signature on mine __________________ I'm done helping those who won't help themselves. TL;DR: -Duke

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nameless Performance BRZ Axleback Exhaust	ESBjiujitsu	Engine, Exhaust, Transmission	1377	04-21-2020 03:23 AM
Nameless Performance Axleback is available for pre-order.	Nameless Performance Inc.	Engine, Exhaust, Bolt-Ons	114	07-23-2012 11:38 PM
Nameless Performance Downpipe is available for pre-order.	Nameless Performance Inc.	Engine, Exhaust, Bolt-Ons	4	07-12-2012 05:57 PM
We are Nameless Performance.	John@Nameless	Announcements, Contests, Giveaways	22	06-19-2012 12:32 AM
Nameless Performance is here.	Nameless Performance Inc.	Engine, Exhaust, Bolt-Ons	16	06-06-2012 05:32 AM

02-05-2014, 04:45 PM	#3221
gonzo Senior Member Join Date: Jul 2012 Drives: frs Location: Cali Posts: 379 Thanks: 355 Thanked 54 Times in 43 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	I need some opinions: I have the nameless axle back and catted front pipe without the over pipe in 2.5 inch. I plan on supercharging in about two years. Should I get the 2.5 inch or 3 inch header now? If I get the 3 inch header now will it fit to my current nameless 2.5 inch catted front pipe and axle back?

02-06-2014, 01:30 PM	#3225
Ryan@Nameless Senior Member Join Date: Jun 2012 Drives: 2014 SWP BRZ Limited Location: Vancouver, WA Posts: 114 Thanks: 102 Thanked 462 Times in 78 Posts Mentioned: 33 Post(s) Tagged: 0 Thread(s)	More header building progress pics for you all -Ryan @ Nameless

User Name		Remember Me?
Password