ALL ARIZONA FR-S/BRZ OWNERS HOME PAGE - Page 1499 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Sivtec · 02-03-2014, 12:40 PM

Quote:

Originally Posted by BugeyedWagon

Who is the local ksport contact in our community? I'm thinking about getting some coilovers for the Evo. Just send me a PM, thanks.

Hey Andrew, I have been told a couple of times that my exhaust is blowing a bit of black smoke when I get on it. Have you seen this? I have checked with a couple guys and they say its 100% normal. The Evo AFR Stock is a bit rich. Im just curious if you have seen anything. I'm obviously not grabbing any check engine lights but was just curious.

BugeyedWagon · 02-03-2014, 12:49 PM

Quote:

Originally Posted by Sivtec

Hey Andrew, I have been told a couple of times that my exhaust is blowing a bit of black smoke when I get on it. Have you seen this? I have checked with a couple guys and they say its 100% normal. The Evo AFR Stock is a bit rich. Im just curious if you have seen anything. I'm obviously not grabbing any check engine lights but was just curious.

I haven't see anything. I know the car is a pig so I'm not surprised the stock tune is rich. Mine only has 1500 miles on it though. Barely broken in.

Sivtec · 02-03-2014, 01:19 PM

Kinda silly but is anyone REALLY excited for the NHRA race coming up?

SirBrass · 02-03-2014, 01:50 PM

Folks, I have a few things up for sale, if anyone is interested. All listings are OBO, meaning if you think I'm asking too much, please tell me what you think it'd be worth paying.

I have an OEM BRZ/Impreza/Outback Navi headunit (the Fujitsu Ten Limited unit), that is updated as it came out of a 2014 model. Asking $300. I know most of ya'll probably aren't interested, but I am selling it (NASIOC and IWSTI folks are probably more interested).

WC Lathwerks stainless steel piston shift knob (with satin beadblast, shift pattern engraving, and leather wrap with red stitching): $80

Raceseng Ashiko shift knob: $80 (735 grams, stainless steel) SOLD

I have an anarchy motive glossy blue shift knob on order and he said he'd try and get it out soon after he gets his batch back from the powder coaters. So, I wouldn't be able to let BOTH knobs go till I get that in.

Also, for those of you with a turbo and looking for an EBCS, I have a 3-port grimspeed EBCS. $80

And for those of you with a WRX or STI, my Cobb Access Port v2 is still up for sale (last guy who said he'd buy it never appeared, let alone with money): $375

Oh, and if anyone needs OEM yellow side markers, I've got mine to sell. $10

nelsmar · 02-03-2014, 02:14 PM

Pics of grimspeed EBCS? Harness included?

SirBrass · 02-03-2014, 02:42 PM

Quote:

Originally Posted by nelsmar

Pics of grimspeed EBCS? Harness included?

It was bought back when I had the STI, so it was supposed to be just plug and play into the factory harness.

This is the EBCS: http://www.rallysportdirect.com/Grim...-STI-2008-2011

nelsmar · 02-03-2014, 03:34 PM

I wanted to see pics to see the condition

how old is it?

SirBrass · 02-03-2014, 03:36 PM

Not sure. I bought it from someone else who bought it new. Never installed. Let me go take a pic real quick

Sent from my SCH-I535 using Tapatalk

SirBrass · 02-03-2014, 03:42 PM

It's not letting me upload a picture. I can text it to you if you'd like

Sent from my SCH-I535 using Tapatalk

B.Rice85 · 02-03-2014, 03:43 PM

Anyone up for shooting some pool tonight?

Sent from my SAMSUNG-SGH-I747 using Tapatalk

fst86frs · 02-03-2014, 05:05 PM

Hey guys anyone looking to do adjustable rear lower control arms? I have a pre-sale list going for the production run of rlca's from voodoo13! Or any other parts pm me!
-Aaron

nelsmar · 02-03-2014, 06:20 PM

Just talked to JDL. They just finalized their new EL header and offered me hookup price for 1 local if they are willing to pay dyno time. I'll tune it for free (you'll need ecutek, but we can work out a deal if you don't have it!).

So in short dyno time + tuning + header for roughly the price of the what the header would normally cost. PM me if you are interested! Header should be done tomorrow.

I will however need to tune the car ahead of time and get a baseline dyno done before the header goes on. JDL also said they can assist with installation if needed.

Who wants some horsepower?!

SirBrass · 02-03-2014, 06:33 PM

What is the hookup price?

Sent from my SCH-I535 using Tapatalk

nelsmar · 02-03-2014, 06:34 PM

Quote:

Originally Posted by SirBrass

What is the hookup price?

Sent from my SCH-I535 using Tapatalk

I'll PM you.

02-03-2014, 01:19 PM	#20975
Sivtec Senior Member Join Date: Jun 2012 Drives: 12 Mitsu Evo X, 09 Honda CBR 600 RR Location: Mesa, AZ Posts: 1,053 Thanks: 448 Thanked 327 Times in 234 Posts Mentioned: 43 Post(s) Tagged: 0 Thread(s)	Kinda silly but is anyone REALLY excited for the NHRA race coming up? __________________ "He who shall be last, shall be sideways and smiling." - Jeremy Clarkson -2013 Scion Raven FR-S -2009 Honda Green/Black CBR600RR

02-03-2014, 02:14 PM	#20977
nelsmar Senior Member Join Date: Feb 2013 Drives: FR-S Location: Phoenix Posts: 2,605 Thanks: 733 Thanked 2,361 Times in 1,031 Posts Mentioned: 345 Post(s) Tagged: 3 Thread(s)	Pics of grimspeed EBCS? Harness included? __________________ When I grow up, I wanna be God. My flickr - *Canibeat* Local magazine scout Old Setup: Vortech Supercharged 360WHP/262WTQ @ 11.5psi My build thread - WTF happened to nelsmar's car thread

02-03-2014, 03:34 PM	#20979
nelsmar Senior Member Join Date: Feb 2013 Drives: FR-S Location: Phoenix Posts: 2,605 Thanks: 733 Thanked 2,361 Times in 1,031 Posts Mentioned: 345 Post(s) Tagged: 3 Thread(s)	I wanted to see pics to see the condition how old is it? __________________ When I grow up, I wanna be God. My flickr - *Canibeat* Local magazine scout Old Setup: Vortech Supercharged 360WHP/262WTQ @ 11.5psi My build thread - WTF happened to nelsmar's car thread

02-03-2014, 06:20 PM	#20984
nelsmar Senior Member Join Date: Feb 2013 Drives: FR-S Location: Phoenix Posts: 2,605 Thanks: 733 Thanked 2,361 Times in 1,031 Posts Mentioned: 345 Post(s) Tagged: 3 Thread(s)	Just talked to JDL. They just finalized their new EL header and offered me hookup price for 1 local if they are willing to pay dyno time. I'll tune it for free (you'll need ecutek, but we can work out a deal if you don't have it!). So in short dyno time + tuning + header for roughly the price of the what the header would normally cost. PM me if you are interested! Header should be done tomorrow. I will however need to tune the car ahead of time and get a baseline dyno done before the header goes on. JDL also said they can assist with installation if needed. Who wants some horsepower?! __________________ When I grow up, I wanna be God. My flickr - *Canibeat* Local magazine scout Old Setup: Vortech Supercharged 360WHP/262WTQ @ 11.5psi My build thread - WTF happened to nelsmar's car thread

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Arizona Bill 'could' criminalize Internet Trolls	Giccin	Off-Topic Lounge [WARNING: NO POLITICS]	18	12-30-2013 03:54 PM
Accessories page for Canadian BRZ owners	percyng	CANADA	1	06-15-2012 08:27 PM
FR-S\BRZ owners give thumbs up to AE86 owners	Oriental Life	Scion FR-S / Toyota 86 GT86 General Forum	19	06-13-2012 04:12 AM
Home Sweet Home, it made it today. Delivery party 5/11 though..	MarkRacerX	Scion FR-S / Toyota 86 GT86 General Forum	15	05-14-2012 04:24 PM

02-03-2014, 05:05 PM	#20983
fst86frs Member Join Date: Aug 2013 Drives: FAT H8R Hot Lava FRS Location: Phoenix Posts: 60 Thanks: 25 Thanked 62 Times in 25 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	Hey guys anyone looking to do adjustable rear lower control arms? I have a pre-sale list going for the production run of rlca's from voodoo13! Or any other parts pm me! -Aaron

User Name		Remember Me?
Password