Sterz' FBM 86 "Jawz" - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Sterz · 01-31-2014, 03:20 PM

Quote:

Originally Posted by Anthonytpt

Were these taken at the bus terminal in Laguna Hills?

Yes they were!

vividracing · 01-31-2014, 03:49 PM

You got some great shots. I love the view from the rear.

Sterz · 02-01-2014, 04:01 PM

Quote:

Originally Posted by vividracing

You got some great shots. I love the view from the rear.

Thank you!! That is my favorite shot as well

OICU812 · 02-01-2014, 04:52 PM

Quote:

Originally Posted by Sterz

Hey guys, little update. So I dropped my car off at Infamous performance today. The kit should be installed by Thursday to Friday. I ordered my FBM radiator and oil cooler this weekend as well. So depending on when those get here, it might be at infamous a little longer than originally planned. Will update with installation pics!

You still doing the fbm shortblock as well? Be very curoius what numbers you get overall on 91, assuming by location that is what you'll be running?

Sterz · 02-01-2014, 04:55 PM

Quote:

Originally Posted by OICU812

You still doing the fbm shortblock as well? Be very curoius what numbers you get overall on 91, assuming by location that is what you'll be running?

I am holding off on the shortblock until I either blow this one up or get tired of the power levels. If I decide to switch to the GTX30 I will do the shortblock at the same time. I will be running 91 and I will post results as soon as I have them!

midnight23 · 02-03-2014, 06:32 AM

nice build! would like to see it when after infamous gets it up and running!

FrSnake · 02-03-2014, 06:46 AM

Love the roof wrap, thinkin about going glossy black on my roof though. Looks great!

Sterz · 02-06-2014, 04:05 PM

Hey guys,

Here is a little sneak peak on the progress of the turbo kit install. I had a Crawford AOS added as well.

Sorry in advance for the blurriness, I will be going down there today and will get some more detailed pictures. It was a quick Iphone picture

Sterz · 02-12-2014, 04:58 PM

The FBM radiator, shroud, and fans are in. The Crawford AOS is in. The whole kit is in, now just waiting on a license from bill @DeliciousTuning and ill be all set to pick her up!. Too excited.

carlossanchez89 · 02-12-2014, 05:09 PM

You're gonna love it man, was just there last saturday tuning my Red FR-S you'll definately break the 400 whp and up with this.

DeliciousTuning · 02-12-2014, 06:33 PM

Quote:

Originally Posted by Sterz

The FBM radiator, shroud, and fans are in. The Crawford AOS is in. The whole kit is in, now just waiting on a license from bill @DeliciousTuning and ill be all set to pick her up!. Too excited.

License sent.

Cheers,
William Knose

Sterz · 02-13-2014, 03:12 PM

Unfortunately there was a little hiccup. All four fittings where the hose meets the pre-assembled end fittings on the oil cooler kit were leaking quite badly. We lost about a quart of oil while driving for 2-3 miles. The hoses are being inspected now and reassembled. I was really hoping to drive this thing home today.

King Tut · 02-13-2014, 03:39 PM

Quote:

Originally Posted by Sterz

Unfortunately there was a little hiccup. All four fittings where the hose meets the pre-assembled end fittings on the oil cooler kit were leaking quite badly. We lost about a quart of oil while driving for 2-3 miles. The hoses are being inspected now and reassembled. I was really hoping to drive this thing home today.

I ended up cutting the pre-assembled lines shorter where they went into the oil filter housing so those never leaked, but the pre-assembled ends did leak after about 3 months where they went on the oil cooler. I talked to LJ @FullBlown about it and he said that some of the kits were assembled with wrongly sized fittings I believe. I would contact him as reassembling them might not fix it.

Sterz · 02-13-2014, 04:37 PM

Quote:

Originally Posted by King Tut

I ended up cutting the pre-assembled lines shorter where they went into the oil filter housing so those never leaked, but the pre-assembled ends did leak after about 3 months where they went on the oil cooler. I talked to LJ @FullBlown about it and he said that some of the kits were assembled with wrongly sized fittings I believe. I would contact him as reassembling them might not fix it.

Do you know the proper fitting size by any chance?

02-03-2014, 06:32 AM	#20
midnight23 dying bird under the hood Join Date: Mar 2013 Drives: 2013 SWP Limited BRZ Location: Disneyland, California Posts: 1,331 Thanks: 546 Thanked 451 Times in 295 Posts Mentioned: 34 Post(s) Tagged: 0 Thread(s)	nice build! would like to see it when after infamous gets it up and running! __________________ GReddy Turbo BRZ tuned by Evasive Motorsports Build Thread Instagram

02-06-2014, 04:05 PM	#22
Sterz Great White Join Date: Aug 2012 Drives: 2013 Whiteout FRS Location: Rancho Santa Margarita, CA Posts: 182 Thanks: 23 Thanked 37 Times in 29 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Hey guys, Here is a little sneak peak on the progress of the turbo kit install. I had a Crawford AOS added as well. Sorry in advance for the blurriness, I will be going down there today and will get some more detailed pictures. It was a quick Iphone picture __________________ Sterz' Great White 86 http://www.ft86club.com/forums/showthread.php?t=54533 Invidia Q300 Catback \| Invidia Catless Frontpipe \| Invidia Overpipe

02-12-2014, 04:58 PM	#23
Sterz Great White Join Date: Aug 2012 Drives: 2013 Whiteout FRS Location: Rancho Santa Margarita, CA Posts: 182 Thanks: 23 Thanked 37 Times in 29 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	The FBM radiator, shroud, and fans are in. The Crawford AOS is in. The whole kit is in, now just waiting on a license from bill @DeliciousTuning and ill be all set to pick her up!. Too excited. __________________ Sterz' Great White 86 http://www.ft86club.com/forums/showthread.php?t=54533 Invidia Q300 Catback \| Invidia Catless Frontpipe \| Invidia Overpipe

02-13-2014, 03:12 PM	#26
Sterz Great White Join Date: Aug 2012 Drives: 2013 Whiteout FRS Location: Rancho Santa Margarita, CA Posts: 182 Thanks: 23 Thanked 37 Times in 29 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Unfortunately there was a little hiccup. All four fittings where the hose meets the pre-assembled end fittings on the oil cooler kit were leaking quite badly. We lost about a quart of oil while driving for 2-3 miles. The hoses are being inspected now and reassembled. I was really hoping to drive this thing home today. __________________ Sterz' Great White 86 http://www.ft86club.com/forums/showthread.php?t=54533 Invidia Q300 Catback \| Invidia Catless Frontpipe \| Invidia Overpipe

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The Great White Hype	Ryan@Nameless	Member's Car Journals	22	06-30-2014 01:25 PM
HSD Street Coilover Setup For FT86! Great Product, Amazing Value, Tested @Pure	Pure Automotive	Brakes, Suspension, Chassis	31	09-18-2013 01:18 PM
Anyone have a great white/6k DRL source?	ortizwyld	Cosmetic Modification (Interior/Exterior/Lighting)	0	06-26-2013 06:27 PM
Great new video from TUNED about the Crawford Performance Turbo Kit for the FT86	wawro569	Scion FR-S / Toyota 86 GT86 General Forum	0	05-13-2013 07:30 PM
HSD Street Coilover Setup For FT86! Great Product, Amazing Value, Tested @Pure	Pure Automotive	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	7	04-07-2013 02:52 AM

01-31-2014, 03:49 PM	#16
vividracing Join Date: May 2012 Drives: 2013 Scion FR-S Location: Gilbert, Arizona Posts: 2,593 Thanks: 491 Thanked 1,065 Times in 617 Posts Mentioned: 49 Post(s) Tagged: 3 Thread(s)	You got some great shots. I love the view from the rear.

User Name		Remember Me?
Password