FT-86 SpeedFactory Catted UEL Header - Page 55 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

stueck9356 · 01-29-2014, 10:54 PM

Hay nao..

http://ft86speedfactory.com/ft86-cat...ader-1397.html

Got super giddy just looking at the place holder for it. We're so close!!

odd question, the descriptions says tig welded. is it back-purged as well?

JaguarXJ6 · 01-29-2014, 11:19 PM

Once the header is released, then we'll have a plethora of exhaust comparisons to listen to.

On a quick count there are basically 10 major bolt-ons including the tune starting from the intake, but excluding catted/resonated/diameter variations, that all contribute to the sound.

It took me weeks of research looking for a specific sound and working backwards to identify the components required and what changes are made when you go catted, unresonated, etc which seems to be the opposite for a lot of folks wondering what the end result will be.

If you understand what sound you want, then you know exactly what the FT86 header will sound like. /shrug

etherealfall · 01-30-2014, 05:41 AM

So does this add much sound? Video said that it was essentially what you have on your car from the overpipe back. Aka, not much changed in the sound.

Sent from my C6603 using Tapatalk

chris x sway · 01-30-2014, 10:18 AM

Anybody mating this with a Tomei 60R? I'd like to hear some feedback. TIA

Tylub · 01-30-2014, 04:10 PM

When I get them, you'll hear what it sounds like mated with perrin over pipe, perrin catted front pipe, and ark dt-s. Hoping the sound will be slightly more aggressive with no rasp and more rumble because as of now, it sounds spot on

EpicNameBro · 01-30-2014, 09:52 PM

Quote:

Originally Posted by Tylub

When I get them, you'll hear what it sounds like mated with perrin over pipe, perrin catted front pipe, and ark dt-s. Hoping the sound will be slightly more aggressive with no rasp and more rumble because as of now, it sounds spot on

This is a similar set up for what i will be going for...although im considering a different over pipe but still along the same lines. So i'll be waiting for your video. I was going to jump on the first batch but i'm waiting for the coating options to come...

OjiGeorge · 01-30-2014, 11:35 PM

I'm planning this with a motive overpipe, and 2.5" Ark Grip Catless resonated fontpipe back exhaust. If it's quiet enough I might eb going all of you titanium owners

Doctor Who · 01-30-2014, 11:57 PM

Quote:

Originally Posted by Tylub

When I get them, you'll hear what it sounds like mated with perrin over pipe, perrin catted front pipe, and ark dt-s. Hoping the sound will be slightly more aggressive with no rasp and more rumble because as of now, it sounds spot on

Basically the exact setup I want to run. Looking forward to sound clips!

tbertran · 01-30-2014, 11:57 PM

If I were you, I'd go check out the page for the holy grail UEL header...

tbertran · 01-31-2014, 12:00 AM

ORDER PLACED!! (order #4251)

thehapaone · 01-31-2014, 12:14 AM

Quote:

Originally Posted by tbertran

ORDER PLACED!! (order #4251)

Too soon junior

shaunsweeney · 01-31-2014, 12:16 AM

Not if he got the catless.

tbertran · 01-31-2014, 12:18 AM

Quote:

Originally Posted by shaunsweeney

Not if he got the catless.

Mmmm... No, the catted one.
Did you check out their page? It went live for purchase about 15 minutes ago.
I got confirmation from @FT-86 SpeedFactory that I was the first order.

shaunsweeney · 01-31-2014, 12:18 AM

Hahaha you fail the discount code isn't active yet. Hence you're #1!

01-29-2014, 11:19 PM	#758
JaguarXJ6 Member Join Date: Nov 2013 Drives: 2015 GT-R, 1993.5 Supra, 1995 XJR Location: Santa Barbara, CA Posts: 58 Thanks: 23 Thanked 37 Times in 14 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Once the header is released, then we'll have a plethora of exhaust comparisons to listen to. On a quick count there are basically 10 major bolt-ons including the tune starting from the intake, but excluding catted/resonated/diameter variations, that all contribute to the sound. It took me weeks of research looking for a specific sound and working backwards to identify the components required and what changes are made when you go catted, unresonated, etc which seems to be the opposite for a lot of folks wondering what the end result will be. If you understand what sound you want, then you know exactly what the FT86 header will sound like. /shrug __________________ 2015 GT-R Pearl White with Ivory, Premium \| Stock, DD 1995 Jaguar XJR \| Turquoise Metallic \| I6 4.0L \| Eaton M90, 11psi \| 4L80E \| 1 of 12 of 400 1993.5 Supra Turbo \| Baltic Blue \| 6spd \| 3.77 Torsen LSD \| SP57 \| RPS manifold \| ViPEC V88 \| 525/500rwhp/tq

01-30-2014, 10:18 AM	#760
chris x sway Member Join Date: Oct 2013 Drives: 2014 FR-S in Mayonnaise Location: 3rd Planet from the Sun Posts: 67 Thanks: 163 Thanked 21 Times in 19 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Anybody mating this with a Tomei 60R? I'd like to hear some feedback. TIA __________________ @chris_x_sway \| @sidewayallday \| @swaygear

01-30-2014, 04:10 PM	#761
Tylub Senior Member Join Date: Jul 2012 Drives: Raven Black FR-S Location: Pomona, CA Posts: 858 Thanks: 434 Thanked 262 Times in 167 Posts Mentioned: 10 Post(s) Tagged: 1 Thread(s)	When I get them, you'll hear what it sounds like mated with perrin over pipe, perrin catted front pipe, and ark dt-s. Hoping the sound will be slightly more aggressive with no rasp and more rumble because as of now, it sounds spot on __________________ instagram @Tylub Mods: Tomei UELs, Tomei OP, Perrin Catted FP, ARK DT-S, Perrin LW Crank Pulley, Enkei RPF1, RSR Sporti, Supertek Intake Tube, Perrin CAI, Stoptech SS lines/brakes/slotted rotors, Cusco MCB brace/Strut Bar

01-30-2014, 11:57 PM	#765
tbertran Senior Member Join Date: Sep 2012 Drives: Subaru BRZ (6027xx) Premium Manual Location: Sacramento, CA Posts: 280 Thanks: 83 Thanked 171 Times in 85 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	If I were you, I'd go check out the page for the holy grail UEL header... __________________ FT86SpeedFactory catted UEL Header / GReddy EVO3 Catback / Cosworth Drop-in air filter / Shifteck short throw shifter / Kartboy pulley / Rear bumper diffuser / Perrin shorty antenna / Raceseng Slammer knob / Carsmo armrest / Clear side markers / 10" CustomSubEnclosure\|Rockford R500X1D\|Rockford P3D4-10 / Perrin Inlet Hose / GrimmSpeed front strut bar / Valentine V1 with BlendMount / All LED Inside

01-31-2014, 12:00 AM	#766
tbertran Senior Member Join Date: Sep 2012 Drives: Subaru BRZ (6027xx) Premium Manual Location: Sacramento, CA Posts: 280 Thanks: 83 Thanked 171 Times in 85 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	ORDER PLACED!! (order #4251) __________________ FT86SpeedFactory catted UEL Header / GReddy EVO3 Catback / Cosworth Drop-in air filter / Shifteck short throw shifter / Kartboy pulley / Rear bumper diffuser / Perrin shorty antenna / Raceseng Slammer knob / Carsmo armrest / Clear side markers / 10" CustomSubEnclosure\|Rockford R500X1D\|Rockford P3D4-10 / Perrin Inlet Hose / GrimmSpeed front strut bar / Valentine V1 with BlendMount / All LED Inside

01-29-2014, 10:54 PM	#757
stueck9356 Member Join Date: Oct 2013 Drives: 2015 VW GTI SE Location: Charlotte, NC Posts: 71 Thanks: 6 Thanked 11 Times in 9 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Hay nao.. http://ft86speedfactory.com/ft86-cat...ader-1397.html Got super giddy just looking at the place holder for it. We're so close!! odd question, the descriptions says tig welded. is it back-purged as well?

01-30-2014, 05:41 AM	#759
etherealfall Member Join Date: Dec 2012 Drives: Toyota 86 GTS Storm Black Location: Australia Posts: 60 Thanks: 2 Thanked 5 Times in 5 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	So does this add much sound? Video said that it was essentially what you have on your car from the overpipe back. Aka, not much changed in the sound. Sent from my C6603 using Tapatalk

01-30-2014, 11:35 PM	#763
OjiGeorge Senior Member Join Date: Jul 2012 Drives: White 2013 FRS Location: Langley, BC Posts: 450 Thanks: 441 Thanked 146 Times in 92 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	I'm planning this with a motive overpipe, and 2.5" Ark Grip Catless resonated fontpipe back exhaust. If it's quiet enough I might eb going all of you titanium owners

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Invidia Catless and Catted Front Pipe - FT-86 SpeedFactory	FT-86 SpeedFactory	Engine, Exhaust, Transmission	107	03-29-2016 11:48 AM
catted header or catted front pipe?	gabeg86	Engine, Exhaust, Transmission	28	10-13-2015 01:32 PM
P&l EL catted and coated header.	wootwoot	Engine, Exhaust, Bolt-Ons	8	10-11-2013 01:50 AM
Catted UEL Header	Cjymiller	Engine, Exhaust, Transmission	20	05-24-2013 01:01 PM
*Invidia Catted and Catless Front Pipes* - FT-86 SpeedFactory RELEASE SALE	FT-86 SpeedFactory	Engine, Exhaust, Bolt-Ons	12	10-24-2012 11:12 PM

User Name		Remember Me?
Password