Sunday Shop Shindig CANCELLED (2/9/14)

[Jmonty]

I would love to install the rear under diffuser, looking to see what clips I might need?

[VesperLynn]

I'm going to reserve a spot to do my endlinks!

[NickFRS]

Originally Posted by VesperLynn

I'm going to reserve a spot to do my endlinks!

need me to bring those stockers for u?

[PoWn3d_0704]

I've got a Perrin Front sway bar I haven't installed.... If you guys are down, I can use the lift for a bit to get that done? I can mob all the way up there that morning in time for the auto show? You all gonna meet at the show or something? I literally know NO ONE up there.

Other than that, should I get endlinks for this Sway Bar? It's the 19mm one. I don'y know if I need them, and since it's all coming apart anyways... may as well?

And then the question is Poly vs Spherical, but I don't know the difference.

[503 BRZ]

The autoshow I won't be able to make but I'd love to come hang out for a bit and meet more of the NW group.

May be a few non-lift mods I could get a hand with? (Plasti-dipping the chrome fender trim )

[DarrenDriven]

I think in five hours we can fit everyone in... just need to get the guys that want to use the lift in line.

[Chen]

Originally Posted by PoWn3d_0704

I've got a Perrin Front sway bar I haven't installed.... If you guys are down, I can use the lift for a bit to get that done? I can mob all the way up there that morning in time for the auto show? You all gonna meet at the show or something? I literally know NO ONE up there.

Other than that, should I get endlinks for this Sway Bar? It's the 19mm one. I don'y know if I need them, and since it's all coming apart anyways... may as well?

And then the question is Poly vs Spherical, but I don't know the difference.

end links aren't required until you get a rear one. I have the 19mm sway in front as well. Freakin pain to get in.

[VesperLynn]

Originally Posted by NickFRS

need me to bring those stockers for u?

Nick it's okay, I found the BC ones. They should be fine in the meantime.

[VesperLynn]

I also have a 6puck ACT clutch with lightened flywheel that's been collecting dust in my garage...


If there's time after, I'd love to put this in. If not however that's totally cool I'll do it another day.

[PoWn3d_0704]

If you're putting together a list, I have a few things that are going to be ready to go on the car by the 9th.

Perrin Front 19mm sway bar
Perrin Poly/machined endlinks
(I'll defer to @Chen in terms of install time...)

I also have the new Perrin power steering mounts that replace the OEM bushings. Those should be fast.

[Chen]

Originally Posted by PoWn3d_0704

If you're putting together a list, I have a few things that are going to be ready to go on the car by the 9th.

Perrin Front 19mm sway bar
Perrin Poly/machined endlinks
(I'll defer to @Chen in terms of install time...)

I also have the new Perrin power steering mounts that replace the OEM bushings. Those should be fast.

Front sway bar shouldn't take long at all. You could do it on jackstands. But I do recommend 2 people to do the install. Guiding it from 1 side to the other is a pain. It took me about an hour and a half for both front/rear and end links installed on jacks.

[BRZPDX]

I guess I'll install the relays under the dash to fix the hyperblink.. What do you guys think, hyperblink = cheesy or not bad?

[NickFRS]

Originally Posted by VesperLynn

Nick it's okay, I found the BC ones. They should be fine in the meantime.

Sounds good bud.

[m.box.design]

hyperblink = schizophrenic