Bayson R Motorsports Bodykits (good or bad)

[jonathan9573]

Well I think I am going to order the front lip to see what kinda quality it is. I will also be removing the license plate bracket cause it just ruins the front end. I'm just guessing but I'm going to bet it doesn't come with the rubber edging like the TRD kit has right?


Sent from my iPhone using Tapatalk 2

[m.box.design]

Originally Posted by jonathan9573

Well I think I am going to order the front lip to see what kinda quality it is. I will also be removing the license plate bracket cause it just ruins the front end. I'm just guessing but I'm going to bet it doesn't come with the rubber edging like the TRD kit has right?


Sent from my iPhone using Tapatalk 2

i dont think any of the replicas come with the rubber edging on the kits.

[jonathan9573]

Guess that's why TRD is 2000. :-)


Sent from my iPhone using Tapatalk 2

[Cjymiller]

Jon, you really gotta try searching man.

Here's my review thread.

http://www.ft86club.com/forums/showthread.php?t=43566

Bayson R is located a couple miles from me.

[m.box.design]

There is a difference between a piece that sits underneath a bumper, which only needs to line up straight and bolt on. a trd style kit needs to cover and fit the bumper like a glove.

[jonathan9573]

Thank you for the link but is Indesign said there is a HUGE difference between lip kits like that and full skirts and lips that extend up the sides and have to have a precision line where it meets the body. I'm glad you had a good experience with them as far as customer service and them wanting to make things right. Says a lot about a company.


Sent from my iPhone using Tapatalk 2

[Hyperian]

I really like the TRD style lip that fits like a glove but that lip doesn't fit on my BRZ. I am still hoping I can find a TRD style lip that does.

[m.box.design]

Originally Posted by jonathan9573

Thank you for the link but is Indesign said there is a HUGE difference between lip kits like that and full skirts and lips that extend up the sides and have to have a precision line where it meets the body. I'm glad you had a good experience with them as far as customer service and them wanting to make things right. Says a lot about a company.


Sent from my iPhone using Tapatalk 2

So did you purchase the kit yet?

[jonathan9573]

I have not ordered it quite yet. I hopefully will very soon.


Sent from my iPhone using Tapatalk 2

[WillyDee]

I purchased the TRD style kit from bayson R and had it installed by my dad and painted from a family friend. I did not buy the TRD rear because i didn't want to shave but he gave me a deal to have the rear spats instead for total of 350 for entire kit. The side skirts and rear spats fit very well. All the parts came with weather strip (the rubber edging) along with all screws/bolts. Friends were impressed with how well and easy it was to install.

CONS: the only problem i had was the front lip, it was a tight fit and it didn't fit flush, some parts did not line up very well either(specifically the fog lights area). Licence plate holes were not drilled correctly and had to do some extra work to really get the license plate frame to fit along car.

overall was very satisfied with quality and how it looked in the end.

[jonathan9573]

Anyone seen or have any pics of the TRD kit painted anything other then white and now the red that WillyDee has posted. Willy that kit looks sick in red. Very good choice for the car.


Sent from my iPhone using Tapatalk 2

[Andrew025]

I've had no issues with my STi replica sides and lip kit from Bayson R. Install was easy and fitment was pretty darn good.

[FRSHunter]

Originally Posted by WillyDee

I purchased the TRD style kit from bayson R and had it installed by my dad and painted from a family friend. I did not buy the TRD rear because i didn't want to shave but he gave me a deal to have the rear spats instead for total of 350 for entire kit. The side skirts and rear spats fit very well. All the parts came with weather strip (the rubber edging) along with all screws/bolts. Friends were impressed with how well and easy it was to install.

CONS: the only problem i had was the front lip, it was a tight fit and it didn't fit flush, some parts did not line up very well either(specifically the fog lights area). Licence plate holes were not drilled correctly and had to do some extra work to really get the license plate frame to fit along car.

overall was very satisfied with quality and how it looked in the end.

Could you take a pic of the part that didn't fit flush on the front lip? Also I think for the license plate you have to drill your own because it was meant to fit Japanese plates and never american plates since there sizes are different. Looks nice by the way!

[WillyDee]

Originally Posted by FRSHunter

Could you take a pic of the part that didn't fit flush on the front lip? Also I think for the license plate you have to drill your own because it was meant to fit Japanese plates and never american plates since there sizes are different. Looks nice by the way!

it rained a little


as you can see it doesn't really cover nicely but its pretty unnoticeable. Also the edge overlaps the fog light area a little and doesn't really fit nicely.


another spot where it doesn't really cover again very unnoticeable