Turbo-ing my daily with a Greddy kit - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

JohnAndFrson · 01-20-2014, 12:53 PM

im looking to turbo my daily driven frs, probably with the greddy kit. any cheaper ones that anyone would reccomend? and anything i should know? i know i have to cut to fit the intercooler and it isnt exactly bolt and go, but how hard could it be? feel free to chime in, i plan to install it in a toyota dealers garage since i work at one

OjiGeorge · 01-20-2014, 01:03 PM

From the sounds of it, your crash bar gets hacked to a point where it wont do you much good. This is a very important part of your car. If you never have passengers in your car, then hey, go for it, but otherwise I'd thing twice.

There is a very cheap part that replaces the factory bumper bar: http://www.enjukuracing.com/products...Scion-FRS.html

It's not going to crumple in the same way that the car is designed to, but if this bar clears, and works with the Greddy kit, You should consider it. Could save a life.

Touge_ninja · 01-20-2014, 01:10 PM

Avo is good. No modifications needed to fit the intercooler

midnight23 · 01-20-2014, 09:13 PM

Quote:

Originally Posted by OjiGeorge

From the sounds of it, your crash bar gets hacked to a point where it wont do you much good. This is a very important part of your car. If you never have passengers in your car, then hey, go for it, but otherwise I'd thing twice.

There is a very cheap part that replaces the factory bumper bar: http://www.enjukuracing.com/products...Scion-FRS.html

It's not going to crumple in the same way that the car is designed to, but if this bar clears, and works with the Greddy kit, You should consider it. Could save a life.

To my knowledge it is just a notch in the crash bar, not exactly hacked up.

AVodka14 · 01-20-2014, 09:21 PM

AVO or full blown. Better safe than sorry. I have heard the GReddy kit is good though. I would just SC if it's a DD.

ParangWala · 01-20-2014, 09:40 PM

As far as I am aware the Greddy turbo kit like most kits out there require you to drill a hole in your oil pan and weld an oil return bung into the hole....

SmsAlSuwaidi · 01-20-2014, 11:47 PM

Quote:

Originally Posted by ParangWala

As far as I am aware the Greddy turbo kit like most kits out there require you to drill a hole in your oil pan and weld an oil return bung into the hole....

Aftermarket oil pans are already out there with bungs for oil and even a larger capacity @MAPerformance has them ready to go

OjiGeorge · 01-21-2014, 12:20 AM

Quote:

Originally Posted by midnight23

To my knowledge it is just a notch in the crash bar, not exactly hacked up.

Can anyone confirm this? I had heard otherwise, and apparently one person just removed the bar all together because so much cutting was required. If it's just a small notch then that really changes my mind of their kit.

midnight23 · 01-21-2014, 12:31 AM

@Evasive Motorsports can you chime in on this?

Pablitomarrero · 01-21-2014, 10:32 AM

Quote:

Originally Posted by OjiGeorge

Can anyone confirm this? I had heard otherwise, and apparently one person just removed the bar all together because so much cutting was required. If it's just a small notch then that really changes my mind of their kit.

You just cut out part of the outline of the IC. I really dont see it defeating the purpose of the crash bar. You dint really "hack it up" to the point of it being useless. Remember GReddy does research this kind of thing and they designed this kit for DD cars

Sent from my iPhone using Tapatalk

King Tut · 01-21-2014, 03:49 PM

http://www.greddy.com/upload/file/13-FRS_TK_T518Z.pdf

Check page 21 for modifications to the front bumper beam. The kit does require welding skills for the oil return as well. I wouldn't let either of those scare me away from purchasing the Greddy kit should that be the kit you prefer. Have you looked at all your options @JohnAndFrson ? It looks like price is your number one concern.

01-20-2014, 12:53 PM	#1
JohnAndFrson Junior Member Join Date: Jan 2014 Drives: Somewhat stock..... Location: United States Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Turbo-ing my daily with a Greddy kit im looking to turbo my daily driven frs, probably with the greddy kit. any cheaper ones that anyone would reccomend? and anything i should know? i know i have to cut to fit the intercooler and it isnt exactly bolt and go, but how hard could it be? feel free to chime in, i plan to install it in a toyota dealers garage since i work at one

01-21-2014, 12:31 AM	#9
midnight23 dying bird under the hood Join Date: Mar 2013 Drives: 2013 SWP Limited BRZ Location: Disneyland, California Posts: 1,331 Thanks: 546 Thanked 451 Times in 295 Posts Mentioned: 34 Post(s) Tagged: 0 Thread(s)	@Evasive Motorsports can you chime in on this? __________________ GReddy Turbo BRZ tuned by Evasive Motorsports Build Thread Instagram

01-21-2014, 03:49 PM	#11
King Tut NASA SpecE30 Racer Join Date: May 2012 Drives: 2006 Honda S2000 Location: Gulf Breeze, FL Posts: 7,279 Thanks: 607 Thanked 5,759 Times in 3,055 Posts Mentioned: 274 Post(s) Tagged: 10 Thread(s)	http://www.greddy.com/upload/file/13-FRS_TK_T518Z.pdf Check page 21 for modifications to the front bumper beam. The kit does require welding skills for the oil return as well. I wouldn't let either of those scare me away from purchasing the Greddy kit should that be the kit you prefer. Have you looked at all your options @JohnAndFrson ? It looks like price is your number one concern. __________________ - King Tut Street/Track Car: 2006 Honda S2000 TT3 \|\| Race Car: 1987 BMW 325is SpecE30 \|\| Tow Vehicle: 2014 RAM 1500 EcoDiesel Sold Cars: 2012 BMW M3 \|\| 2013 Subaru BRZ \|\| 2012 Porsche Cayman R \|\| 2009 Chevrolet Z06 \|\| 2009 BMW M3 \|\| 2004 BMW M3 \|\| 2004 Nissan 350Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Greddy turbo	MikesFRS	Forced Induction	104	11-25-2014 12:47 AM
Greddy turbo kit and AVO world turbo kit SPECIAL PRICING!	THMotorsports.com	Forced Induction	129	07-24-2014 07:51 PM
HKS Supercharger / Avo Turbo Kit / Greddy Turbo Kit - All Available at Import DPS!!	rickspecd	Forced Induction	4	07-12-2013 12:50 PM
Greddy turbo	clayrush	Forced Induction	12	12-18-2012 01:19 PM
GReddy in on-deck circle. GReddy turbo for FR-S/BRZ first up.	2JZ-DNA	Engine, Exhaust, Transmission	46	04-19-2012 09:13 PM

01-20-2014, 01:03 PM	#2
OjiGeorge Senior Member Join Date: Jul 2012 Drives: White 2013 FRS Location: Langley, BC Posts: 450 Thanks: 441 Thanked 146 Times in 92 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	From the sounds of it, your crash bar gets hacked to a point where it wont do you much good. This is a very important part of your car. If you never have passengers in your car, then hey, go for it, but otherwise I'd thing twice. There is a very cheap part that replaces the factory bumper bar: http://www.enjukuracing.com/products...Scion-FRS.html It's not going to crumple in the same way that the car is designed to, but if this bar clears, and works with the Greddy kit, You should consider it. Could save a life.

01-20-2014, 01:10 PM	#3
Touge_ninja Sending rods to their doo Join Date: Jul 2012 Drives: 700HP STi Location: Seattle WA Posts: 1,926 Thanks: 169 Thanked 541 Times in 369 Posts Mentioned: 49 Post(s) Tagged: 0 Thread(s)	Avo is good. No modifications needed to fit the intercooler

01-20-2014, 09:21 PM	#5
AVodka14 Senior Member Join Date: Aug 2012 Drives: 2013 Raven FRS MT Location: KY Posts: 857 Thanks: 351 Thanked 302 Times in 185 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	AVO or full blown. Better safe than sorry. I have heard the GReddy kit is good though. I would just SC if it's a DD.

User Name		Remember Me?
Password