|
||||||
| Engine, Exhaust, Transmission Discuss the FR-S | 86 | BRZ engine, exhaust and drivetrain. |
 |
|
|
Thread Tools | Search this Thread |
02-15-2013, 10:57 AM
|
#29 |
|
Member
Join Date: May 2012
Drives: BRZ
Location: Asia
Posts: 63
Thanks: 11
Thanked 13 Times in 11 Posts
Mentioned: 0 Post(s)
|
Hi,
Am running a Greddy oil cooler with defi sensors on the greddy sandwich plate. Oil pressure at idle is 1.5bar (around 21.8psi) When car is started, oil pressure is at 7.5bar (108.8psi), which is pretty much the max. outside of track conditions. Oil - Motul 0W20. Hope the above info helps. Cheers |
|
|
|
01-20-2014, 12:56 AM
|
#30 |
|
Member
Join Date: Jul 2013
Drives: GT86-JDM
Location: MY
Posts: 54
Thanks: 8
Thanked 9 Times in 7 Posts
Mentioned: 0 Post(s)
|
I hv an oil cooler from Mishimoto.
Local weather noon time is about 32degC. Oil is TOTAL 5w50 full-syn. Normal driving: Oil temp reach 85 to 91DegC, the press is 1.5bar @ idle, Drive is ~ 6bar. Track day: Oil temp reach 116degC, the press is ~1.2bar @ idle, Drive is 6bar, but if went over 6000 rpm is ~ 5bar+. if temp is about 100 to 109degC the press all the way hold 6 bar. Q? should I used something like 15w50 for track day to gain the higher oil press, like keep it at min 6 bar with engine load? |
|
|
|
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| oil pressure gauge | onemorelap | Engine, Exhaust, Transmission | 69 | 03-04-2023 05:46 PM |
| Some observations | Nardi330 | AUSTRALIA | 20 | 02-07-2013 06:18 AM |
| 90 Day Anniversary ..some Observations | Scooby South | BRZ First-Gen (2012+) — General Topics | 6 | 09-03-2012 11:17 AM |
| Temperature Gauge a dummy gauge? | bambbrose | BRZ First-Gen (2012+) — General Topics | 40 | 08-19-2012 04:29 PM |
| First Payment sent, Observations after 6 weeks. | Scooby South | BRZ First-Gen (2012+) — General Topics | 27 | 08-01-2012 02:02 PM |
