Completed!! FBM 700+HP Build Dyno graph & Vid inside - Page 14 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Frs300 · 12-22-2013, 03:22 PM

Quote:

Originally Posted by FullBlown

Well.. we got around to tuning it again yesterday. Good news is two guys on the trunk = traction. Bad news is traction = broken gearbox LOL. We will be tearing the trans out this week and proceed with the V160 swap.

FINALLY blew the gearbox. Might as well shoot for 900hp now

FullBlown · 12-22-2013, 03:25 PM

Quote:

Originally Posted by Frs300

FINALLY blew the gearbox. Might as well shoot for 900hp now

Pretty happy with where we are at for now. The car violently spins 4th and 5th gear.

Time to play with the traction control

Frs300 · 12-22-2013, 03:27 PM

Quote:

Originally Posted by FullBlown

Pretty happy with where we are at for now. The car violently spins 4th and 5th gear.

Time to play with the traction control

Been waiting for someone to play with TC.

BTW whats the lag like with the 6466

FullBlown · 12-22-2013, 03:29 PM

25 psi by 5500 rpm.

suaveflooder · 12-22-2013, 03:32 PM

Quote:

Originally Posted by Frs300

FINALLY blew the gearbox. Might as well shoot for 900hp now

I agree!!

Ross · 12-22-2013, 04:28 PM

What exhaust housing are you using? Also are you monitoring exhaust back pressure?

FullBlown · 12-22-2013, 06:44 PM

We are monitoring back pressure. We are still testing different housings.

Dipstik-sportech · 12-22-2013, 06:50 PM

Was wondering how long till u destroyed that pos gearbox. I guess now the effort will be on the tranny swap. Who knows what the next weak link will be.....

Sent from my Nexus 5 using Tapatalk

FullBlown · 12-22-2013, 06:55 PM

Quote:

Originally Posted by Dipstik-sportech

Was wondering how long till u destroyed that pos gearbox. I guess now the effort will be on the tranny swap. Who knows what the next weak link will be.....

Sent from my Nexus 5 using Tapatalk

Hopefully nothing else.

Dipstik-sportech · 12-22-2013, 07:10 PM

I expect nothing less than a wheels in the air anti lag launch BTW

Sent from my Nexus 5 using Tapatalk

FullBlown · 12-23-2013, 01:40 PM

Here is a pic of the carnage

Dipstik-sportech · 12-23-2013, 01:43 PM

It's still good. Just jb weld those bits back on and yer good to go eh

Sent from my Nexus 5 using Tapatalk

SmsAlSuwaidi · 12-23-2013, 01:45 PM

Quote:

Originally Posted by Dipstik-sportech

It's still good. Just jb weld those bits back on and yer good to go eh

Sent from my Nexus 5 using Tapatalk

LOL

Sent from my IBrick

FullBlown · 12-23-2013, 01:55 PM

We are thinking cleaning it out and just not run that gear.

12-22-2013, 04:28 PM	#188
Ross Senior Member Join Date: Jun 2013 Drives: 85 corolla gts Location: Chesapeake , Va Posts: 361 Thanks: 17 Thanked 177 Times in 110 Posts Mentioned: 26 Post(s)	What exhaust housing are you using? Also are you monitoring exhaust back pressure? Last edited by Ross; 12-22-2013 at 04:40 PM. Reason: Added a question.

12-22-2013, 06:50 PM	#190
Dipstik-sportech Senior Member Join Date: Oct 2012 Drives: 2013 BRZ satin white pearl sportech Location: Thunder Bay Ontario Canada Posts: 1,813 Thanks: 842 Thanked 911 Times in 576 Posts Mentioned: 43 Post(s)	Was wondering how long till u destroyed that pos gearbox. I guess now the effort will be on the tranny swap. Who knows what the next weak link will be..... Sent from my Nexus 5 using Tapatalk __________________ 2013 SWP BRZ sportech. 11.11sec@129.01mph, 511whp on e70. FullBlown base kit, FullBlown built 9.5:1 engine, GTX3076R GEN2 turbo, 1700cc Bosch injectors, FullBlown flex fuel kit, FullBlown radiator and oil cooler, FullBlown custom 3" dual exit exhaust, act xtreme clutch, whiteline diff and subframe inserts, BC Racing coilovers, hotchkiss 18mm rear sway, is300 3.73 differential ... Never finished

12-22-2013, 07:10 PM	#192
Dipstik-sportech Senior Member Join Date: Oct 2012 Drives: 2013 BRZ satin white pearl sportech Location: Thunder Bay Ontario Canada Posts: 1,813 Thanks: 842 Thanked 911 Times in 576 Posts Mentioned: 43 Post(s)	I expect nothing less than a wheels in the air anti lag launch BTW Sent from my Nexus 5 using Tapatalk __________________ 2013 SWP BRZ sportech. 11.11sec@129.01mph, 511whp on e70. FullBlown base kit, FullBlown built 9.5:1 engine, GTX3076R GEN2 turbo, 1700cc Bosch injectors, FullBlown flex fuel kit, FullBlown radiator and oil cooler, FullBlown custom 3" dual exit exhaust, act xtreme clutch, whiteline diff and subframe inserts, BC Racing coilovers, hotchkiss 18mm rear sway, is300 3.73 differential ... Never finished

12-23-2013, 01:43 PM	#194
Dipstik-sportech Senior Member Join Date: Oct 2012 Drives: 2013 BRZ satin white pearl sportech Location: Thunder Bay Ontario Canada Posts: 1,813 Thanks: 842 Thanked 911 Times in 576 Posts Mentioned: 43 Post(s)	It's still good. Just jb weld those bits back on and yer good to go eh Sent from my Nexus 5 using Tapatalk __________________ 2013 SWP BRZ sportech. 11.11sec@129.01mph, 511whp on e70. FullBlown base kit, FullBlown built 9.5:1 engine, GTX3076R GEN2 turbo, 1700cc Bosch injectors, FullBlown flex fuel kit, FullBlown radiator and oil cooler, FullBlown custom 3" dual exit exhaust, act xtreme clutch, whiteline diff and subframe inserts, BC Racing coilovers, hotchkiss 18mm rear sway, is300 3.73 differential ... Never finished

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Beginner STX Build Whiteout FRS Build Thread	Hachi86Roku	Tracking / Autocross / HPDE / Drifting	21	03-31-2020 07:52 PM
Max's BRZ STX Build	blkwrxwag	Tracking / Autocross / HPDE / Drifting	157	10-13-2014 03:14 PM
God's Build	GodSays	Member's Car Journals	13	04-17-2013 01:31 PM
My build... well some of it	cruzinbill	Electronics \| Audio \| NAV \| Infotainment	41	04-01-2013 04:02 PM

12-22-2013, 03:29 PM	#186
FullBlown Senior Member Join Date: Sep 2012 Drives: Scion FRS Location: MN Posts: 1,171 Thanks: 242 Thanked 2,026 Times in 548 Posts Mentioned: 298 Post(s)	25 psi by 5500 rpm.

12-22-2013, 06:44 PM	#189
FullBlown Senior Member Join Date: Sep 2012 Drives: Scion FRS Location: MN Posts: 1,171 Thanks: 242 Thanked 2,026 Times in 548 Posts Mentioned: 298 Post(s)	We are monitoring back pressure. We are still testing different housings.

12-23-2013, 01:40 PM	#193
FullBlown Senior Member Join Date: Sep 2012 Drives: Scion FRS Location: MN Posts: 1,171 Thanks: 242 Thanked 2,026 Times in 548 Posts Mentioned: 298 Post(s)	Here is a pic of the carnage

12-23-2013, 01:55 PM	#196
FullBlown Senior Member Join Date: Sep 2012 Drives: Scion FRS Location: MN Posts: 1,171 Thanks: 242 Thanked 2,026 Times in 548 Posts Mentioned: 298 Post(s)	We are thinking cleaning it out and just not run that gear.

User Name		Remember Me?
Password