DarrenDriven's Shop - SPRINGS IN STOCK! Home of the 25 minute spring install

[NickFRS]

Originally Posted by Jmonty

Looks like a nice wagon setup, I miss mine sometimes....... Like in the snow last week

It's a 02 WRX wagon with a full 2006 STi swap. The engine is a Cosworth 600 08 longblock with every option. (only 6000 miles on it was brand new from cosworth factory in 2011) Currently running a gtx35r on 21lb's making 400WHP 400WTQ. Meth is going on after coils. Then we are turning the boost up to 26-28lb's to see what she does. The mod list is way to big for this car...

Thx

[BRZPDX]

are you doing a drag build or track? Seems pretty solid. Tranny upgrades needed?

[NickFRS]

Originally Posted by BRZPDX

are you doing a drag build or track? Seems pretty solid. Tranny upgrades needed?

It's being set up for track. But it could easily drag. It has a stage 4 act clutch n lighweight flywheel with upgraded axels. The actual gears are stock. The trans has 40k miles. It's kinda hard to blow a STi trans.

This car only wants to go fast. Hard to drive it under the speed limit. After the coils this car will have 0 body roll. Going to be interesting. it already drifts with 255's square. Fun wagon.

[BRZPDX]

this beast needs to be tracked or taken to the drag next summer for sure..

[DarrenDriven]

Originally Posted by NickFRS

@DarrenDriven, just ordered some Stance inverted coil overs for the wagon... Think we can get together on a day to throw the beast up on the lift? I'll Take you for some pulls on the race map.
Coils are the last piece to the suspension puzzle!

Of course, man!

[Jmonty]

Originally Posted by NickFRS

It's being set up for track. But it could easily drag. It has a stage 4 act clutch n lighweight flywheel with upgraded axels. The actual gears are stock. The trans has 40k miles. It's kinda hard to blow a STi trans.

This car only wants to go fast. Hard to drive it under the speed limit. After the coils this car will have 0 body roll. Going to be interesting. it already drifts with 255's square. Fun wagon.

Good times 4 sure my old wagon was 340ish WHP so I know the smiles per mile are off the chart, I was running 245's and the drift in the snow was so damn fun

[NickFRS]

Originally Posted by BRZPDX

this beast needs to be tracked or taken to the drag next summer for sure..

You know it! We will bring it out to PIR when it start getting a little sunny outside for a drag night. For track we are waiting for my dad to find a new DD. I think he is getting a 2015 WRX.

Originally Posted by Jmonty

Good times 4 sure my old wagon was 340ish WHP so I know the smiles per mile are off the chart, I was running 245's and the drift in the snow was so damn fun

The car currently has a super easy tune. Once the boost is turned up she will be in 500WHP+ range. The engine is built for a 9k redline. We have it limited at 7,500. Might turn up the RPM's to 8,200 when the boost goes up... 340WHP is fun but 380+ is a whole new ball game. Night n day difference. Esp with what you need to achieve the numbers. This car has id2000 fuel injectors with cosworth rails. Currently running a single pump system but once meth goes on we will be doing a dual pump. Otherwise the pump wont be able to keep up with the injectors. Vroom vroom! I had my 2011 STi tuned to the max on stock pump 320WHP 360WTQ on 22lb's. The wagon would walk it 5 car lengths by 140MPH on it's eco 380whp 385wtq tune. The race map is crazy faster then the eco map... oh and my sti ran a easy 13.5 1/4 with me blowing my injectors on the track...

Going to be laughable when I race him in the FRS this summer. Don't want to blow up Darrens thread so i'll make a new one in the NW main section. Post some pictures of your wagon... love me some wagon....

[DarrenDriven]

@indesign stopped by last night to install the GT86 headlights that @PDXBRZ brought back from his trip to Japan. @thehapaone even stopped by to lend a hand.

[Rio]

I have a couple easy items to install and I was wondering if I could use your shop. 1. Rally Armor mud flaps 2. Window Rain guards and 3. maybe, just maybe some matte black 3M vinyl.

An excuse to go see your shop LOL!

[DarrenDriven]

Sure man, that's no problem. Do you have my cell? Text me and let me know when you want to get the car in there.

[fukamoto]

@DarrenDriven.......I'm so in love. This shop looks absolutely mint. Hopefully sometime this summer we'll be able to have a few beers and throw some coilovers and a turbo kit on Beautiful shop.

[#944_10_Series_FRS]

Originally Posted by fukamoto

@DarrenDriven.......I'm so in love. This shop looks absolutely mint. Hopefully sometime this summer we'll be able to have a few beers and throw some coilovers and a turbo kit on Beautiful shop.

I did stop by Darren's shop. It looks great and I love the decoration in there. Once his remodel is done, the whole house will be beautiful.

[DarrenDriven]

Yeah, the shop needs a good cleaning... but this Summer should be pretty fun!

[NickFRS]

Originally Posted by DarrenDriven

Yeah, the shop needs a good cleaning... but this Summer should be pretty fun!

Don't forget to make the lift accessible for sat!!