STi Brembos - Page 9 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

chutrain · 09-23-2013, 04:27 PM

Anyone fitted the 04 rears and know which brackets are needed?

King Tut · 09-23-2013, 05:03 PM

Quote:

Originally Posted by chutrain

Anyone fitted the 04 rears and know which brackets are needed?

http://www.fastwrx.com/rebradkit2im.html

Trap63 · 11-13-2013, 06:13 PM

Quote:

Originally Posted by Jive Turkey

05 brembo's
04 STI DBA 4000 rotors
SS lines
Super blue fluid (arrest me)
Stop tech street pads.

on track this setup felt great.

Hi, about front brake lines....which type you installed?...the Impreza Brembos STi 04 are fitting for BRZ? thanks

Jive Turkey · 11-13-2013, 09:12 PM

Quote:

Originally Posted by Trap63

Hi, about front brake lines....which type you installed?...the Impreza Brembos STi 04 are fitting for BRZ? thanks

i upgraded to SS lines. IIRC SS lines are for the most part universal

Trap63 · 11-14-2013, 02:39 AM

Thanks Jive Turkey ! So I will try this one SS http://www.ebay.com/itm/221227346975...975%26_rdc%3D1

continuecrushing · 11-14-2013, 05:37 AM

Wait, just the BRACKETS are $250?

Vten · 11-14-2013, 09:24 AM

Quote:

Originally Posted by Shutter

Wait, just the BRACKETS are $250?

Yes.

And in order to put the rear bracket , you need to shave the knuckle ear, where the old caliper bolted on. And also need to cut the dust plate .

King Tut · 11-14-2013, 11:07 AM

I think it is worth spending the extra and getting the 08-12 rear calipers then they just bolt right up. You will have to cut away the rear dust shield for any brake upgrade in the rear.

mfbmike · 11-14-2013, 12:38 PM

Trying to find these calipers (in decent condition) is like pulling teeth.

How do calipers get so banged up? rofl. I had a BBK on my previous car and it was in damn near mint condition, aside from being dirty. The ones I've seen on nasioc/ebay/etc. are chipped to shit.

King Tut · 11-15-2013, 10:51 AM

Quote:

Originally Posted by mfbmike

Trying to find these calipers (in decent condition) is like pulling teeth.

How do calipers get so banged up? rofl. I had a BBK on my previous car and it was in damn near mint condition, aside from being dirty. The ones I've seen on nasioc/ebay/etc. are chipped to shit.

Most are from Japanese scrap yards where they just throw parts around scratching them up apparantly.

Trap63 · 11-19-2013, 10:09 AM

Quote:

Originally Posted by King Tut

I used 08-12 STI DBA 4000 T3 rotors. As long as the DBA rotors have a -10 at the end of the part number, then they are dual drilled for 5x100 and 5x114.3. Parking brake works great. I got a great deal on the rotors and pads from a vendor on NASIOC. I will get some pics of the brakes this weekend.

so, I found a rear pair STI 2008+ calipers. The right rear rotors are therefore 316x20mm 5x100 isn't it? If I find DBA rear DD (5x114 and 5x100) all may fits well?
Anyone knows the paint code to re-paint rear caliper?

King Tut · 11-19-2013, 10:12 AM

Quote:

Originally Posted by Trap63

so, I found a rear pair STI 2008+ calipers. The right rear rotors are therefore 316x20mm 5x100 isn't it? If I find DBA rear DD (5x114 and 5x100) all may fits well?

The STI OEM rotor is 5x114.3 so get the DBA rear rotors that are dual drilled and "all fits well".

SkAsphalt · 11-25-2013, 10:08 AM

Quote:

Originally Posted by Vten

Yes.

And in order to put the rear bracket , you need to shave the knuckle ear, where the old caliper bolted on. And also need to cut the dust plate .

Dude, your car is sexy as F*

Turbowned · 11-25-2013, 08:42 PM

Damn, I've been sitting on my '13 Brembos for a month now, no $$ for powdercoat or rotors/pads

Probably because I bought another car... lol

11-14-2013, 02:39 AM	#117
Trap63 Senior Member Join Date: Apr 2013 Drives: Brz WRB - Europe LHD Location: TURIN - Piedmont - ITALY Posts: 922 Thanks: 1,181 Thanked 840 Times in 289 Posts Mentioned: 40 Post(s)	Thanks Jive Turkey ! So I will try this one SS http://www.ebay.com/itm/221227346975...975%26_rdc%3D1 __________________

11-14-2013, 11:07 AM	#120
King Tut NASA SpecE30 Racer Join Date: May 2012 Drives: 2006 Honda S2000 Location: Gulf Breeze, FL Posts: 7,279 Thanks: 607 Thanked 5,759 Times in 3,055 Posts Mentioned: 274 Post(s)	I think it is worth spending the extra and getting the 08-12 rear calipers then they just bolt right up. You will have to cut away the rear dust shield for any brake upgrade in the rear. __________________ - King Tut Street/Track Car: 2006 Honda S2000 TT3 \|\| Race Car: 1987 BMW 325is SpecE30 \|\| Tow Vehicle: 2014 RAM 1500 EcoDiesel Sold Cars: 2012 BMW M3 \|\| 2013 Subaru BRZ \|\| 2012 Porsche Cayman R \|\| 2009 Chevrolet Z06 \|\| 2009 BMW M3 \|\| 2004 BMW M3 \|\| 2004 Nissan 350Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
will the sti brembos fit fr-s/brz?	driver01	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	51	04-12-2014 02:25 PM
Those Brembos, fixed caliper? Or not? [Patent inside!]	madfast	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	155	12-08-2011 02:06 PM

11-14-2013, 05:37 AM	#118
continuecrushing Join Date: Mar 2013 Drives: 2013 Firestorm FRS Location: Lake Elsinore, CA Posts: 2,707 Thanks: 1,231 Thanked 2,144 Times in 1,003 Posts Mentioned: 73 Post(s)	Wait, just the BRACKETS are $250?

User Name		Remember Me?
Password