EVO 3 Drone Solutions

[FR-S FI]

Originally Posted by King Tut

Turbo kit is the only answer. I have no drone on my Evo 3. Call up my boy LJ @FullBlown for the solution.

This^ Though you can try what I did before I turboed, take the silencers out, and grind or cut the welds and remove the tube from the silencer plate and put the plates back in. In my case it sounded kinda in between without the drone...

[zc06_kisstherain]

Originally Posted by EvilBeaverFace

nameless catted over/frontpipe w/ Helmholtz?

Not layout specific and I don't own an evo 3 but if you want a Helmholtz you could try that.

no cat in frontpipe doesn't change anything as far as CEL, the o2 sensors are all on the first cat.

I am with this guy but it's quite pricey

[EvilBeaverFace]

Originally Posted by zc06_kisstherain

I am with this guy but it's quite pricey

Just FYI: $484 for without the OP, $564 with.

[Fishbone]

I've done some reading on drone and people seem to have good results with a Vibrant Ultra Quiet Resonator. Do a Google search on it. I'm looking to get one in the spring.

Goodluck. I feel your pain.