*Phastek* Winjet Coverage @ SEMA 2013 - JDM Replica Headlights, Fogs, Tails - Page 5 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Fett4Real · 11-12-2013, 08:32 AM

Quote:

Originally Posted by connor_lol

What about the Spyder headlights? What does each part do on the head lights? How do high beams work on them? DRL? Is the bottom strip used as a turn signal as well? Will the existing turn signal work as well? I need answers!!!

Theres a whole other thread on them....explains all of that.

PhastekSport · 11-12-2013, 09:45 AM

Honestly, the most difficult part of a headlight upgrade will be removing the bumper. That's about it.

The most important things are plug and play in every setup. The H7 plug will be adapted to work with the FR-S stock H11 plug. The 9005 plug from the high beam will be adapted to allow the mechanical flap to function.

If coming from an H11 HID setup, just get new bulbs.

We've been working with lights, retrofitting, and more for a while. These products come from the same location. Either Taiwan or mainland China. Winjet is using an H7 projector and so is Spyder.

Here is an example of the projector:

There's your high beam and low beam. 1 bulb and then a projector with a mechanical flap.

Additional features are usually separated out so that you can control how they function. This is where they might use splices or T taps.

connor_lol · 11-12-2013, 11:32 AM

Quote:

Originally Posted by Fett4Real

Theres a whole other thread on them....explains all of that.

You mean the poll thread that doesn't give any real OFFICIAL information about them? Yeah.

StormMcCloud · 11-12-2013, 11:43 AM

Tell them to hurry up and ship you some so that you can sell them! Hahaha, I need a new set of headlights and really don't want to just get another set of stock ones.

Fett4Real · 11-12-2013, 12:03 PM

Quote:

Originally Posted by connor_lol

You mean the poll thread that doesn't give any real OFFICIAL information about them? Yeah.

http://www.ft86club.com/forums/showthread.php?t=44510

No....the preorder thread...why not ask in a thread about them instead of a thread about a different companies light?

MemphisR · 11-12-2013, 03:12 PM

Quote:

Originally Posted by Chris@Phastek

Additional features are usually separated out so that you can control how they function. This is where they might use splices or T taps.

By additional features, do you mean the LED DRL's? Could you not just make it so the LED strips "high beam" come on with the DRL's and then go to their "low beam" setting when the running lights turn on?

PhastekSport · 11-14-2013, 08:09 AM

DRLs and turns in this case only because they are not a standard feature in our stock headlights (FR-S).

Even if they are wired with plugs, I'm going to say there is a 75% chance you could control how they function by wiring them up yourself.

dkrou351 · 11-19-2013, 06:00 PM

Where are the high beams on these headlights? Or do you need a bi xenon hid bulb for these? Anyone know?

PhastekSport · 11-19-2013, 06:16 PM

H7 with flap on the projector for high beam. Single casing performs both functions.

You will only need one H7 bulb.

dkrou351 · 11-19-2013, 06:32 PM

and if I already have an hid kit installed in my stock headlights, would that work?

MemphisR · 11-19-2013, 08:59 PM

I heard a rumor on another board that the quality of these lights is not as good as factory. Can anyone confirm or deny this. Thanks.

PhastekSport · 11-19-2013, 09:22 PM

Quote:

Originally Posted by dkrou351

and if I already have an hid kit installed in my stock headlights, would that work?

You'll just need new bulbs with the H7 base.

Sent from my SAMSUNG-SM-N900A using Tapatalk

DarkCard · 11-20-2013, 12:45 AM

Quote:

Originally Posted by MemphisR

I heard a rumor on another board that the quality of these lights is not as good as factory. Can anyone confirm or deny this. Thanks.

No shit lol, factory will have the utmost quality control. These are a ebay special. You get what you pay for

Having said that I'm still very interested In these lights

Sent from my SAMSUNG-SGH-I747 using Tapatalk

MemphisR · 11-20-2013, 01:29 AM

Quote:

Originally Posted by DarkCard

No shit lol, factory will have the utmost quality control. These are a ebay special. You get what you pay for

Having said that I'm still very interested In these lights

Sent from my SAMSUNG-SGH-I747 using Tapatalk

I obviously new they were not going to be as good, but I was told that they are considerably worse. The pictures look great but I just wanted to hear from someone else who saw them in person to give me their opinions on the lights. But thanks for your help.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The Non Official SEMA 2013 Coverage Thread - Day 2	PhastekSport	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	43	11-13-2013 05:56 PM
The Non Official SEMA 2013 Coverage Thread - Day 1	PhastekSport	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	32	11-09-2013 09:04 AM
Details Finally - Spyder LED Headlights - FT-86 SpeedFactory SEMA Coverage	FT-86 SpeedFactory	Cosmetic Modification (Interior/Exterior/Lighting)	33	11-08-2013 08:16 PM
Circuit Motorsports SEMA 2013 Coverage	Circuit Motorsports	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	7	11-07-2013 12:57 AM
The Non Official SEMA 2013 Coverage Thread - Pre Show	PhastekSport	BRZ Photos, Videos, Wallpapers, Gallery Forum	1	11-04-2013 04:15 PM

11-12-2013, 09:45 AM	#58
PhastekSport Join Date: Sep 2012 Drives: 2013 Scion FR-S Location: Houston, TX Posts: 940 Thanks: 53 Thanked 696 Times in 284 Posts Mentioned: 74 Post(s)	Honestly, the most difficult part of a headlight upgrade will be removing the bumper. That's about it. The most important things are plug and play in every setup. The H7 plug will be adapted to work with the FR-S stock H11 plug. The 9005 plug from the high beam will be adapted to allow the mechanical flap to function. If coming from an H11 HID setup, just get new bulbs. We've been working with lights, retrofitting, and more for a while. These products come from the same location. Either Taiwan or mainland China. Winjet is using an H7 projector and so is Spyder. Here is an example of the projector: There's your high beam and low beam. 1 bulb and then a projector with a mechanical flap. Additional features are usually separated out so that you can control how they function. This is where they might use splices or T taps.

11-12-2013, 11:43 AM	#60
StormMcCloud Southeast 86 Club Join Date: Sep 2013 Drives: 2013 Scion FR-S Location: Atlanta, Ga Posts: 54 Thanks: 34 Thanked 31 Times in 11 Posts Mentioned: 0 Post(s)	Tell them to hurry up and ship you some so that you can sell them! Hahaha, I need a new set of headlights and really don't want to just get another set of stock ones.

11-14-2013, 08:09 AM	#63
PhastekSport Join Date: Sep 2012 Drives: 2013 Scion FR-S Location: Houston, TX Posts: 940 Thanks: 53 Thanked 696 Times in 284 Posts Mentioned: 74 Post(s)	DRLs and turns in this case only because they are not a standard feature in our stock headlights (FR-S). Even if they are wired with plugs, I'm going to say there is a 75% chance you could control how they function by wiring them up yourself.

11-19-2013, 06:16 PM	#65
PhastekSport Join Date: Sep 2012 Drives: 2013 Scion FR-S Location: Houston, TX Posts: 940 Thanks: 53 Thanked 696 Times in 284 Posts Mentioned: 74 Post(s)	H7 with flap on the projector for high beam. Single casing performs both functions. You will only need one H7 bulb.

User Name		Remember Me?
Password