The Non Official SEMA 2013 Coverage Thread - Day 2

[digital_assassin]

Originally Posted by SnapOv3st3r

Bodykit though on the Kraftwerks car = FAIL. That thing is gawdy!

It's the Varis III kit. All parts are carbon fiber under that blue paint. Hefty price tag too. >$8,000. I love it but it's way too much for most people I'm sure.

[Kiske]

So many new good looking goodies! Those headlights with the extended boomerangs! WOW!

[AZFA20]

Originally Posted by F1point4

Some highlights of Phastek's Day 2 of SEMA coverage include:
+Ground Control's Strut Tower Brace Clears the Innovate Sprintex Blower

I wanted to point out that the tophaps/camber plates in that photo are not out of the box going to fit the Innovate/Sprintex blower. They have added additional standoff mounting platforms for the clearance of the blower on those ones in the pic.

[kurbkilla]

Originally Posted by post_break

It says DOT right on the headlight in that picture.

I do realize that, that is why I included a picture of it. I should have clarified saying that are there any other regulations other DOT for these headlight to be street legal, or is DOT enough.

[SnapOv3st3r]

Originally Posted by digital_assassin

It's the Varis III kit. All parts are carbon fiber under that blue paint. Hefty price tag too. >$8,000. I love it but it's way too much for most people I'm sure.

Carbon or not, just not feeling that. Takes away the body lines to much imo..

[SPCorBUST]

I've been throwing my money at the screen, but nothing is happening.

I'm confused.

[Mr122]

Who makes those? They would look cool paint matched!

[PhastekSport]

Originally Posted by Mr122

Who makes those? They would look cool paint matched!

Winjet.

I'll write down to ask about finishes or at least have a primered ready to paint version.

Sent from my SAMSUNG-SM-N900A using Tapatalk

[kinryu]

Originally Posted by kurbkilla

Am I correct in assuming that these headlight are street legal in California(DOT)? With full plug and play? And led as daytime running lights that function as high-beams? and are these halogen or HID's?

This was my car I lent winjet to show. And yes winjet lights are DOT approved and all plug and play. It uses an h7 bulb which you can swap out to hid like any other headlight. The LED stay on as day time running lights. They will turn off of lowbeams used but once high beams are used the LED will come back on as well

[kinryu]

Originally Posted by F1point4

Had a good time getting back out there and photographing the good's for y'all. @Chris@Phastek got a lot of good video today; look out for that very soon.

Some highlights of Phastek's Day 2 of SEMA coverage include:
+Ground Control's Strut Tower Brace Clears the Innovate Sprintex Blower
+Close up pictures of the NEW STAGE 2 upgrade of the Sprintex Kit (The 335 kit)
+More closeups of the Kraftwerks Rotrex kit
+Winjet introduced a set of taillights as well as an JDM replica headlight. They also had the 1st 86 out of the First 86
+Spec-D Tuning shows a prototype "Boomerang" headlight
+A lot of closeups of that huge whaletail
+Invictus showed some real dry carbon interior deco as well as their new turbo kit
+Evolve (Cusco?) has a new header, radiator, and air to oil cooler!
+The Seibon collection including interior parts
+And Lisa from Spyder makes an appearance

Thanks for the coverage of my car I lent to winjet booth!

[kinryu]

Originally Posted by Mr122

Who makes those? They would look cool paint matched!

That is winjet

[PhastekSport]

Originally Posted by kinryu

This was my car I lent winjet to show. And yes winjet lights are DOT approved and all plug and play. It uses an h7 bulb which you can swap out to hid like any other headlight. The LED stay on as day time running lights. They will turn off of lowbeams used but once high beams are used the LED will come back on as well

I think I got video of it during the cruise roll out as well....

[kinryu]

Originally Posted by Chris@Phastek

Winjet.

I'll write down to ask about finishes or at least have a primered ready to paint version.

Sent from my SAMSUNG-SM-N900A using Tapatalk

Thank you for the coverage of my frs I lent to winjet! Glad you enjoyed it and accompany by superstreet cover model Noemii J and her friend Mila. Big thanks to RRYDES, socalvalley86, vortech superchargers, ssr, kw, carlos benitez at PUREIMPORT, tanabe, tuan at glossworks LA, beat sonic, fuzion teknique, dynamic innovations for the carbon fiber full lip kit, koyo rad, aerojacket, black beat motoring mocro image, genome tuning and of course Winjet automotive lighting.

[kinryu]

Originally Posted by Chris@Phastek

I think I got video of it during the cruise roll out as well....

Haha thank you!
Nice coverage you did of sema!