Auto Windows roll up when lock the car

[Imperius]

Hello

I want to install Auto Windows roll up module, so that the car will roll up winnows automatically when i lock it .

I got the module on order
http://www.ebay.com/itm/140410237014...84.m1439.l2649

Now all I need is to know where are the DIRECT wires that connect to the motors of the windows, I couldn't find it in the BRZ electrical diagram ,

Can some one help ?

[zc06_kisstherain]

hmmm interesting..since it's very cheap i would like to know too

[AdrianG]

It looks like everything you're after is in the web interface of the shop manual.

Here's what you need:

http://www.ft86club.com/forums/showthread.php?t=35279

[Imperius]

Thanks I will look in to it today, hopefully will make it work,

[Muskokan]

Originally Posted by Imperius

Thanks I will look in to it today, hopefully will make it work,

Subscribed for results and a vid.

[Trap63]

Originally Posted by Imperius

Hello

I want to install Auto Windows roll up module, so that the car will roll up winnows automatically when i lock it .

I got the module on order
http://www.ebay.com/itm/140410237014...84.m1439.l2649

Now all I need is to know where are the DIRECT wires that connect to the motors of the windows, I couldn't find it in the BRZ electrical diagram ,

Can some one help ?

I read wide the manual that I posted without finding the solution. It seems that this module is like the "M482 of italian car alarm GT Series (fit for i.g. Ferrari, Fiat Group). I know that it needs a positive 12+ coming from alarm box when this is activated on door closing..
I don't understand where to wire in a standard wiring system without alarm box.

[Imperius]

for Me I installed Remote Start/ Alarm system so I have this dedicated wire for roll windows Up, connected today the module (for windows) for Driver side
but it doesn't work, when i lock the car the window jumps half an inch and stops, and that's it.

in the picture is where i connected the roll up module

[Trap63]

Sorry for enclosed pic in italian...but I installed some modules in some cars and all are fitting in the same way (electrical). One wire even to Ground, one to 12+ battery and one pair per side window (LH and RH).
The command wire is coming from alarm and it seems to be in operating status as the "antenna amplifier input 12+".
In this example the command wire from alarm (AUX exit) is "rosa", PINK.
Another feature to identify is if BRZ wiring window hub on UP with "+" polarity or not.
Maybe the "consensus wire" could be wired to "schema/section" where system close up doors with remote/keyless input

[Trap63]

English version....to better understand operating way of this kind of module.

[Sportsguy83]

Originally Posted by Imperius

Hello

I want to install Auto Windows roll up module, so that the car will roll up winnows automatically when i lock it .

I got the module on order
http://www.ebay.com/itm/140410237014...84.m1439.l2649

Now all I need is to know where are the DIRECT wires that connect to the motors of the windows, I couldn't find it in the BRZ electrical diagram ,

Can some one help ?

Please read this thread. Especially the last two posts. CAUTION!!

http://www.ft86club.com/forums/showt...152#post921152

[s2d4]

Originally Posted by Sportsguy83

Please read this thread. Especially the last two posts. CAUTION!!

http://www.ft86club.com/forums/showt...152#post921152

I've got auto folding mirror installed for when my car is locked and it comes back out when I start the car.
Adapting this subaru OEM kit may work for the window roll up function.

Unfortunately I do not have the part number so probably need a vendor to source one from Japan.

[Trap63]

Originally Posted by s2d4

I've got auto folding mirror installed for when my car is locked and it comes back out when I start the car.
Adapting this subaru OEM kit may work for the window roll up function.

Unfortunately I do not have the part number so probably need a vendor to source one from Japan.

uhm...in Italy BRZ is sold always with switch to open/close door mirrors...but I don't see the choice in Personalization Menu of TechStream....to grant autoclose them.

[s2d4]

Originally Posted by Trap63

uhm...in Italy BRZ is sold always with switch to open/close door mirrors...but I don't see the choice in Personalization Menu of TechStream....to grant autoclose them.

Yeah, the Australian ones came like that as well.

The added subaru OEM auto folding kit came from an aussie shop called garge88, unfortunately they purposely pulled the part number sticker off so I wasn't able to get the part number. It is definitely a jap kit as the instructions were in jap so no it is not through techstream. It only had a plice into the doorlock connector and the other connectors were pretty much like a piggy back system off the stock power window switches.

[Trap63]

Maybe this one?
http://www.aichi-toyota.jp/shop/prod...product_id=851