my raven with white Enkei NT03

[Erza_ft86]

Originally Posted by SavEvoIX

What suspension?

Im running RCE tarmac 0's.

[OICU812]

First white on black I've see. Kudos for being bold. I'm always curious of opinions on wide squared fitments, do you have any regrets going so wide all around, feel sluggish or slower? Any drive ability issues?

[car_roll]

What alignment are you at?

[Erza_ft86]

Originally Posted by OICU812

First white on black I've see. Kudos for being bold. I'm always curious of opinions on wide squared fitments, do you have any regrets going so wide all around, feel sluggish or slower? Any drive ability issues?

No regrets at all going this wide at all. I dont track my car so I couldnt tell you if the car is slower but it certainly doesnt feel slower/sluggish through the canyons. nothiing but grip now and no rubbing when driving hard either. only dropped around 1.5inches

[Erza_ft86]

Originally Posted by car_roll

What alignment are you at?

no alignment just yet, ive been really busy but going in probably next week. the fronts are maxed out with camber bolts so probably somwhere in the ball park of -2 to -2.5 and the rear is just the natural camber with the drop so probably somewhere around the same as the front around -2

[mfbmike]

Would it be to much to ask for you to measure your fender to ground?

The measurement from the highest part of your front fender to the ground? I'm on the same coils and about to throw on the same wheels (in SBC) on the car but with 265/35 tires on them.

I'm curious if my car is lowered the same amount as yours. You say you have no rubbing. I'm under the assumption I will be rubbing and need to get my fenders rolled to fit the 265's comfortably.



For sake of argument, I'm currently around ~25 inches fender to ground on my RCE Tarmac 0's.

Thanks in advance!

[Erza_ft86]

Originally Posted by mfbmike

Would it be to much to ask for you to measure your fender to ground?

The measurement from the highest part of your front fender to the ground? I'm on the same coils and about to throw on the same wheels (in SBC) on the car but with 265/35 tires on them.

I'm curious if my car is lowered the same amount as yours. You say you have no rubbing. I'm under the assumption I will be rubbing and need to get my fenders rolled to fit the 265's comfortably.



For sake of argument, I'm currently around ~25 inches fender to ground on my RCE Tarmac 0's.

Thanks in advance!

ill check for you tomorrow after work but even with the 265's I dont think you will have to roll you fenders. If it helps any im all the way down in the front with the 280 spring in the front and rear

[mfbmike]

Originally Posted by Erza_ft86

ill check for you tomorrow after work but even with the 265's I dont think you will have to roll you fenders. If it helps any im all the way down in the front with the 280 spring in the front and rear

Don't sweat it now. lol.

I got everything on. It does rub, under full lock and pretty hard cornering. Just going to get them rolled for the peace of mind as the car will eventually be pushed harder.



Can't get over how good it handles now though.

I am also maxed out on the RCE T0's up front.

[wlwarfield]

Looks beautiful! I have the same wheels/same specs and ALMOST bought white from Evasive but instead opted for matte black!

[Erza_ft86]

Originally Posted by mfbmike

Don't sweat it now. lol.

I got everything on. It does rub, under full lock and pretty hard cornering. Just going to get them rolled for the peace of mind as the car will eventually be pushed harder.



Can't get over how good it handles now though.

I am also maxed out on the RCE T0's up front.

congrats lol! im surprised you rub cause jive turkey looks a bit lower than us and hes running 265's with no rubbing at the track?



the car does handle amazing now. lol but I need some better rubber for my next set of tires

[Erza_ft86]

Originally Posted by wlwarfield

Looks beautiful! I have the same wheels/same specs and ALMOST bought white from Evasive but instead opted for matte black!

car looks good

cant go wrong with either color white is just the biggest pain in my ass to keep clean

[mfbmike]

Originally Posted by Erza_ft86

congrats lol! im surprised you rub cause jive turkey looks a bit lower than us and hes running 265's with no rubbing at the track?



the car does handle amazing now. lol but I need some better rubber for my next set of tires

michelin pss run a bit wider than most tires. can't recall exactly what he's running. At this point I'm only rubbing on the rear plastic bumper tab during hard cornering - it will soon rub itself out. After rolling the fronts (as he did), no longer rubbing there - unless I try to go full lock or something.

michelin pss are pretty awesome.

[Erza_ft86]

didnt know jive rolled the fronts? I wanted to get a set of pss's but didnt have the funds to get them at the time... should have waited but im very impatient lol now i know if i get some pss in 265 for my next set of tires I gotta roll fender

[Frs123]

Originally Posted by Erza_ft86

This past weekend I tried to get a new battery for my dslr to take some quality pics but best buy did not have them so I had to order it online. In the meantime here are some quick iphone pictures I took last night.

[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

The last couple pics I edited for my instagram. Cant wait till my batteries come in though! Thanks for looking

instagram- big_erza

some parking lot fun after the iphone shoot on my IG

I was going to get the same wheels but different spec
Looks really good