Tomei Titanium Exhaust Systems - The SpeedFactory way... - Page 4 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

andrewFT86 · 10-25-2013, 07:10 PM

Quote:

Originally Posted by FT-86 SpeedFactory

Type 80 drive by and in-cabin video posted in OP

Was the video done without the silencer?

neurokinetik · 10-25-2013, 07:55 PM

Quote:

Originally Posted by Anthony

A video showing the difference between with and without the silencer would be nice, especially on the 60R, since that's the one most people are worried about being too loud.

Seconded!

mike the snake · 10-25-2013, 09:36 PM

It does look like the 80mm system dips pretty low as it goes under the rear crossmember. This looks like it might be a scraping point on lowered cars.

I'm wondering if there'd be any performance loss if one were to flatten the tubing at the crossmember to gain some ground clearance.

I know it's almost sacriligous to do something like that to such a beautiful exhaust, but it may come down to that, or a seriously scraped up pipe. Not sure which would be worse.

DriftEightSix · 10-25-2013, 11:30 PM

You able to get a measurement of the ground clearance on the 80 system at all?

Cheers.

Everyone who is looking at the 80 system what 3" overpipe/downpipe are you all running? Or thinking of connecting up to this system?

FT-86 SpeedFactory · 10-25-2013, 11:35 PM

We'll be sticking the 80 on our race car.

For those worried about scraping, raise the car up.

There is only one way to route an exhaust one this car to the rear, and you have to go under that brace. So take that brace and measure 3.5 inches down from it right below the diff. Thats where this will hang.

Anthony · 10-25-2013, 11:48 PM

Quote:

Originally Posted by FT-86 SpeedFactory

The 60R has no drone on a stock car. It's my favorite. A little loud maybe for a daily but liveable. The 60S is best compromise. But that 60R sound is so damn good!

-Jeremy

How would you predict the 60R to sound on Borla headers with the Tomei Ti front pipe? Raspy?

FT-86 SpeedFactory · 10-25-2013, 11:55 PM

Quote:

Originally Posted by Anthony

How would you predict the 60R to sound on Borla headers with the Tomei Ti front pipe? Raspy?

Not sure. My guess is a bit raspy, you'd probably want a resonated front pipe or catted front pipe, unless of course this is a track car, then it won't matter.

Anthony · 10-25-2013, 11:57 PM

The latter, haha! Still curious though. I'm predicting it to sound pretty awful, but since you've actually heard the catback in person, you'll definitely have a better guess than me.

mike the snake · 10-26-2013, 01:09 AM

Quote:

Originally Posted by DriftEightSix

You able to get a measurement of the ground clearance on the 80 system at all?

Cheers.

Everyone who is looking at the 80 system what 3" overpipe/downpipe are you all running? Or thinking of connecting up to this system?

I'm going with the Nameless 3" overpipe and frontpipe.

DriftEightSix · 10-26-2013, 07:19 PM

Quote:

Originally Posted by mike the snake

I'm going with the Nameless 3" overpipe and frontpipe.

Got a link to that?

I couldn't find it on their website :S

SmsAlSuwaidi · 10-26-2013, 07:45 PM

Quote:

Originally Posted by DriftEightSix

Got a link to that?

I couldn't find it on their website :S

It's mythical

koevasi · 10-27-2013, 01:25 AM

Quote:

Originally Posted by FT-86 SpeedFactory

We've been out filming all day, install videos, impressions and more. Give it time it will develop. We can't instantly post 20hrs of data.

what's so bad about a 'we sell it too' post? lol you sell the product, you need to advertize!

i found your vids more helpful with your commentary and in-car driving clips. good stuff keep it going. some more info on the silencers would be greatly appreciated.

i actually need something perrin res. quiet for my commute but i definitely like the weight savings you get with tomei exhausts.

mike the snake · 10-27-2013, 01:54 PM

It's not listed on their site. You need to call them directly. I believe they make them to-order. My shop/tuner ordered mine and they're 2 weeks out.

Quote:

Originally Posted by DriftEightSix

Got a link to that?

I couldn't find it on their website :S

FT-86 SpeedFactory · 10-28-2013, 10:33 AM

10-25-2013, 11:30 PM	#46
DriftEightSix Pegasus White Join Date: Jun 2012 Drives: 86 Location: Brisbane. Posts: 973 Thanks: 646 Thanked 126 Times in 104 Posts Mentioned: 8 Post(s)	You able to get a measurement of the ground clearance on the 80 system at all? Cheers. Everyone who is looking at the 80 system what 3" overpipe/downpipe are you all running? Or thinking of connecting up to this system? __________________ Driving: Pegasus White Manual GTS 86.

10-25-2013, 11:57 PM	#50
Anthony Weight Nazi Join Date: Aug 2012 Drives: 13 FRS -399lb, 11 335is, 05 Tiburon Location: Biloxi, MS / Gulf Coast 86 Posts: 3,702 Thanks: 5,009 Thanked 3,714 Times in 1,765 Posts Mentioned: 150 Post(s)	The latter, haha! Still curious though. I'm predicting it to sound pretty awful, but since you've actually heard the catback in person, you'll definitely have a better guess than me. __________________ Build Thread \| The Venus Project \| Any car which holds together for a whole race is too heavy.

10-28-2013, 10:33 AM	#56
FT-86 SpeedFactory Join Date: Jul 2012 Drives: 2013 Scion FR-S Location: Des Moines, IA Posts: 7,694 Thanks: 1,298 Thanked 3,579 Times in 1,253 Posts Mentioned: 341 Post(s)	More videos posted to OP

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tommy Kaira Full Titanium Exhaust Systems	BPAuto	Engine, Exhaust, Transmission	48	11-02-2018 08:56 AM
ΘΘΘ Tomei Titanium Exhaust Systems ΘΘΘ Cat Backs, Front Pipes, Over Pipes and Headers	FT-86 SpeedFactory	Engine, Exhaust, Bolt-Ons	291	02-16-2017 10:37 PM
Tomei Titanium Exhaust Pre-Orders @ RallySportDirect.com	RallySport Direct	Engine, Exhaust, Bolt-Ons	71	12-04-2013 07:25 PM
TOMEI Titanium Exhaust and Cat Delete Pipe * 4.6kg ~ 7.3 Kg * $950 Shipped	RavSpec	Engine, Exhaust, Bolt-Ons	4	10-01-2013 08:14 AM

10-25-2013, 09:36 PM	#45
mike the snake Senior Member Join Date: Jul 2013 Drives: 2013 BRZ Location: Norcal Posts: 1,592 Thanks: 1 Thanked 623 Times in 378 Posts Mentioned: 15 Post(s)	It does look like the 80mm system dips pretty low as it goes under the rear crossmember. This looks like it might be a scraping point on lowered cars. I'm wondering if there'd be any performance loss if one were to flatten the tubing at the crossmember to gain some ground clearance. I know it's almost sacriligous to do something like that to such a beautiful exhaust, but it may come down to that, or a seriously scraped up pipe. Not sure which would be worse.

10-25-2013, 11:35 PM	#47
FT-86 SpeedFactory Join Date: Jul 2012 Drives: 2013 Scion FR-S Location: Des Moines, IA Posts: 7,694 Thanks: 1,298 Thanked 3,579 Times in 1,253 Posts Mentioned: 341 Post(s)	We'll be sticking the 80 on our race car. For those worried about scraping, raise the car up. There is only one way to route an exhaust one this car to the rear, and you have to go under that brace. So take that brace and measure 3.5 inches down from it right below the diff. Thats where this will hang.

User Name		Remember Me?
Password