1300hp capable 6 speed swap who is interested?

[Beyer Subaru]

Originally Posted by Unicorn

Dear NomoreNA,

Since when did transmissions get rated in horsepower?

Yours faithfully,
Unicorn

Dear @Unicorn,

You will get a much better response to your questions to the members if you @ in front of whom ever you are asking. This notifies the other party of your mention.

To my knowledge aftermarket or universal trans have always been rated in power/torque like all other driveline parts i.e. clutch, flywheel, trans, differentials, driveshafts, axles, etc.

[Unicorn]

Originally Posted by Beyer Subaru

To my knowledge aftermarket or universal trans have always been rated in power/torque like all other driveline parts i.e. clutch, flywheel, trans, differentials, driveshafts, axles, etc.

Dear Beyer Subaru,

Only low quality aftermarket parts and/or rice specials & their suppliers/sellers rate drivetrain components by power.

Yours sincerely,
Unicorn

[Sportsguy83]

Originally Posted by Unicorn

Dear Beyer Subaru,

Only low quality aftermarket parts and/or rice specials & their suppliers/sellers rate drivetrain components by power.

Yours sincerely,
Unicorn

Dear @Unicorn,

Love the smile on your avatar.
Also, thanks for "dearing" everyone.

Yours truly,
Sportsguy83

[SmsAlSuwaidi]

The guy might have the most bad ass built fa20 and you think he doesn't know that tq is what kills gearboxes?

[Beyer Subaru]

Originally Posted by Unicorn

Dear Beyer Subaru,

Only low quality aftermarket parts and/or rice specials & their suppliers/sellers rate drivetrain components by power.

Yours sincerely,
Unicorn

Hrrrm, no. I'd have to disagree. An example - http://www.allisontransmission.com/d...t/specs_HS.pdf

I don't consider allison trans to be low quality or rice. Just because you don't know something doesn't make it wrong.

[Unicorn]

Dear Beyer Subaru,

I will take your comments back to the board of Unicorns on the rainbow.

Best regards,
Unicorn

[pheoxs]

Complete overkill for what I could ever accomplish but very interested in seeing this come to life. Everything else in our drivetrain has routes for more power (clutch / drive shaft / axles) so its good to see the tranny has options above OEM now too

[Beyer Subaru]

Originally Posted by Unicorn

Dear Beyer Subaru,

I will take your comments back to the board of Unicorns on the rainbow.

Best regards,
Unicorn

Wait!! Don't go yet. Take some of this to them -
http://www.driveshaftshop.com/
http://www.ppgearbox.com.au/page.asp?productid=99
http://eng.kaps-transmissions.com/pr...l-gearbox.html
http://www.exedyusa.com/race_clutch/...ulti-plate.php

Most every drivetrain part is going to have some kind of hp/tq ratings. If they weren't rated then you wouldn't know what would break it.

Again, you want to use an @ if you want to gain the attention of who you are speaking with. Example @Beyer Subaru.

[Unicorn]

Dear Beyer Subaru,

I appreciate your effort to copy & paste what you find on the internet to try and justify your statement, but please also try and appreciate what actually breaks a transmission component.

There are no black and whites. There are only aggregates and compromises. I am reasonably confident that if you approached any of the companies you reference and ask what the primary measurement of capability is, they would state 'torque'.

If you wish to undertake the exercise, I will gladly sacrifice one care-bear for every transmission company who says "power".

Yours sincerely,
Unicorn

[Sportsguy83]

Originally Posted by Unicorn

Dear Beyer Subaru,

If you wish to undertake the exercise, I will gladly sacrifice one care-bear for every transmission company who says "power".

Yours sincerely,
Unicorn

[NomoreNA]

Originally Posted by Unicorn

Dear NomoreNA,

Since when did transmissions get rated in horsepower?

Yours faithfully,
Unicorn

Using hp as a benchmark is easier when your advertising to a variety of people. It will hold 800 lb ft tq.

[Beyer Subaru]

Originally Posted by Unicorn

Dear Beyer Subaru,

I appreciate your effort to copy & paste what you find on the internet to try and justify your statement, but please also try and appreciate what actually breaks a transmission component.

There are no black and whites. There are only aggregates and compromises. I am reasonably confident that if you approached any of the companies you reference and ask what the primary measurement of capability is, they would state 'torque'.

If you wish to undertake the exercise, I will gladly sacrifice one care-bear for every transmission company who says "power".

Yours sincerely,
Unicorn

Yep. You got it. I thought that you didn't understand but it seems as though you have a firm understanding. We are saying the same thing just differently.

[NomoreNA]

Originally Posted by Dipstik-sportech

I've been inside this tranny, I hope you have a magic wand to wave to make it handle that hp level. Or are you blowing smoke and saying 1300hp......from a rotary with 200ft/lb and a 13,000rpm redline lol.

I clearly stated "I have a few transmission cases to choose from" so read before you talk shit.

[NomoreNA]

If you guys don't want a trans thats perfectly fine I was just being nice since I am buying tooling to make mine.