Raceseng | 70mm and 72.5mm Innovate Supercharger Pulley - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

phloozy · 09-20-2013, 10:08 AM

Quote:

Originally Posted by Raceseng

If we did, I probably wouldn't be able to manufacture them fast enough!

Jarrett Seng

Raceseng | Owner
610.336.0206

A lightweight crank pulley should be a good boost for NA no?

Darryljr11 · 09-20-2013, 02:12 PM

Should make some chrome ones for us vortech guys

Turbowned · 09-20-2013, 02:39 PM

Dyno plots! We need dyno plots!

xjohnx · 09-20-2013, 02:51 PM

70mm on the way. will get some before/after dynos once the pulley, map sensor and tune arrive.

phloozy · 09-20-2013, 03:11 PM

Quote:

Originally Posted by xjohnx

70mm on the way. will get some before/after dynos once the pulley, map sensor and tune arrive.

are you using mikes e85 map or meth? I forget what you are running. Post up the numbers so I can have a basic feel for around where I am.

xjohnx · 09-20-2013, 03:14 PM

Quote:

Originally Posted by phloozy

are you using mikes e85 map or meth? I forget what you are running. Post up the numbers so I can have a basic feel for around where I am.

I'm using both Mike and Delicious Tuning's tunes, e85 and 93, although i'll likely be sticking to 93 for the most part.

No meth at the moment.

Mike's tune looked like it was going to put down about 250 on E85 w/ the 75mm pulley but we had to stop the runs early because of some dyno issues.

phloozy · 09-20-2013, 03:19 PM

Quote:

Originally Posted by xjohnx

I'm using both Mike and Delicious Tuning's tunes, e85 and 93, although i'll likely be sticking to 93 for the most part.

No meth at the moment.

Mike's tune looked like it was going to put down about 250 on E85 w/ the 75mm pulley but we had to stop the runs early because of some dyno issues.

Yea he got 285 with the 70mm and e85 which is what I am running. Would like to see other runs as well. I think i remember talking to you about the delicious tune now.

xjohnx · 09-20-2013, 04:05 PM

Quote:

Originally Posted by phloozy

Yea he got 285 with the 70mm and e85 which is what I am running. Would like to see other runs as well. I think i remember talking to you about the delicious tune now.

any idea as to what he got on 93 with the 70mm?

phloozy · 09-20-2013, 04:20 PM

Quote:

Originally Posted by xjohnx

any idea as to what he got on 93 with the 70mm?

I dont think he did a run

sw20kosh · 09-20-2013, 04:32 PM

Quote:

Originally Posted by Turbowned

Dyno plots! We need dyno plots!

Of what? The Raceng 70 mm pulley?

Here: 91 + Meth early tune (red):

Turbowned · 09-20-2013, 04:41 PM

Interesting... I wonder how it would do on 93 with a full exhaust and not just a cat-back.

sw20kosh · 09-21-2013, 01:41 PM

Quote:

Originally Posted by Turbowned

Interesting... I wonder how it would do on 93 with a full exhaust and not just a cat-back.

That dyno was done with full exhaust and headers

Turbowned · 09-21-2013, 05:08 PM

Oh, I thought I read cat-back only

lbroskee · 09-22-2013, 01:05 AM

are these lightweight? curious on differences between these and the ones FA20CLUB is putting out

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Raceseng \| Revo Engine Pulley Product Release	Raceseng	Engine, Exhaust, Transmission	50	01-09-2015 02:24 PM
Innovate Supercharger!!!	Titanmotorsports	Forced Induction	62	08-24-2014 10:25 PM
Raceseng \| 70mm and 72.5mm Innovate Supercharger Pulley	Raceseng	Engine, Exhaust, Transmission	6	09-19-2013 05:56 PM
Raceseng \| Revo Engine Pulley Group Buy	Raceseng	Groupbuys	68	09-17-2013 12:04 PM
Daily driver dyno and modifications review (Raceseng pulley update)	Fofofawcett	Engine, Exhaust, Transmission	12	08-29-2013 10:57 AM

09-20-2013, 02:51 PM	#18
xjohnx Grip>Slip Join Date: Jun 2012 Drives: 13 SWP BRZ Ltd - Innovate Powered! Location: RVA Posts: 3,563 Thanks: 656 Thanked 1,717 Times in 1,031 Posts Mentioned: 45 Post(s) Tagged: 3 Thread(s)	70mm on the way. will get some before/after dynos once the pulley, map sensor and tune arrive.

User Name		Remember Me?
Password