Raceseng | 70mm and 72.5mm Innovate Supercharger Pulley
 

Raceseng collaborated Moto-East to develop small diameter pulleys for the Innovate Supercharger. We have 70mm and 72.5mm pulleys in stock!

The 70mm pulley increases boost to 11.5 psi and puts the Innovate supercharger at 15,000 RPM of continuous red line operation at 7,400 engine RPM. Expect an increase of 20-30 hp!

The 72.5mm pulley increases boost to 10 psi. Expect an increase of 10-15 horsepower!

Although the pulleys are a simple bolt on, tuning is required to optimize their performance. Mike at Moto-East (@moto-mike) is a tuning guru and is available to answer questions.

CHECK OUT THE PULLEYS ON OUR WEBSTORE HERE - http://www.raceseng.com/innovate-sup...r-s-subaru-brz

http://www.raceseng.com/media/catalo...scpulley-1.jpg
http://www.raceseng.com/media/catalo...scpulley-2.jpg
http://www.raceseng.com/media/scpulley-72.jpg

Finally. Stoked!

Very nice. :) Got some headed our way for stock. ;)

cant wait to get this in my hands

greedy bum :thumbup:

Jarrett,
You know we have a need for a six rib three inch vortech pulley....just sayin...looks like you do nice work and rapid proto

I can send my three inch to you if that helps, currently I only have it in a 8 rib, its a nice size for street and track wg builds

Send me an email jarrett (@) raceseng.com - Let's talk about it! Thanks!

One of these days guys! Once I pick up that supercharger and a Meth Kit. :D (next year?) I could buy now but need a daily driver.

Sent

Gorgeous

http://i.imgur.com/p0Z0oZ5.jpg

does it come with a new belt? does it requires a new belt?

You don't need a new belt

Can you make a $95 solution for us NA guys to add 20-30hp?

I'll be standing by...

If we did, I probably wouldn't be able to manufacture them fast enough!


Jarrett Seng

Raceseng | Owner
610.336.0206