Advan TCIII or Work XD9 - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Vten · 09-07-2013, 11:05 AM

I would go with the Advans

brz_star21 · 09-07-2013, 06:51 PM

Quote:

Originally Posted by PRORICAN

I have coilovers.
Don't have BBK's yet but I'm planning to get them.
I do plan on doing some autoxing.
Advan has terrible sizes/offsets? Didn't know 18x9.5 +40 was considered terrible. In my opinion it's one of the best sizes/offsets for this car.

Matter of preference I suppose regarding +40 being the best offset. One or two wheels across the whole lineup with that offset isn't the greatest of selection choice is what I meant.

PRORICAN · 09-07-2013, 11:42 PM

Man, that poll is 50/50 Lol! I think I'm going with the advans just because I can't get over the fact that I won't be able to use a bbk unless I add a 20mm spacer. Was also contemplating either Work emotion kiwamis or rays 57extreme but those are def a little played out with the twins. So back to the tciii's!

OmarGC · 09-07-2013, 11:49 PM

Quote:

Originally Posted by PRORICAN

Man, that poll is 50/50 Lol! I think I'm going with the advans just because I can't get over the fact that I won't be able to use a bbk unless I add a 20mm spacer. Was also contemplating either Work emotion kiwamis or rays 57extreme but those are def a little played out with the twins. So back to the tciii's!

There's bbk's that can clear, however the brembo caliper needs that extra 20mm. AP Racing has their bbk that clears

SciOnDrifTtSlIdeR · 09-08-2013, 12:07 AM

Would you need to run spacers on these wheels?

PRORICAN · 09-08-2013, 12:23 AM

Quote:

Originally Posted by OmarGC

There's bbk's that can clear, however the brembo caliper needs that extra 20mm. AP Racing has their bbk that clears

Alright thanks! I meant to say brembos. Would love to get AP's but sti brembos can be had for much cheaper.

PRORICAN · 09-08-2013, 12:24 AM

Quote:

Originally Posted by SciOnDrifTtSlIdeR

Would you need to run spacers on these wheels?

If using coilovers no.

ajrcow · 09-08-2013, 03:03 AM

TCIII is much lighter over the XD9 and ADVAN has a better offset and clearance for calipers, I willl prefer concave face over lip

Here's a pic that I stole from my friend's site :

He has AP Racing brakes and still has lots of room !

With running full tread to fit the wheel like 255/265, you will need coil-overs with camber plates and camber kit to make it to work.

PRORICAN · 09-08-2013, 10:25 AM

Quote:

Originally Posted by ajrcow

TCIII is much lighter over the XD9 and ADVAN has a better offset and clearance for calipers, I willl prefer concave face over lip

Here's a pic that I stole from my friend's site :

He has AP Racing brakes and still has lots of room !

With running full tread to fit the wheel like 255/265, you will need coil-overs with camber plates and camber kit to make it to work.

That looks good! Yeah I'm currently running the same size/offset wheels on 265 rubber, so I know it will fit just fine with my set up. Thanks!

PRORICAN · 09-09-2013, 11:37 AM

Made my decision and picking up the wheels today. Thanks for the help guys!
My first set of advans coming soon!

Stevo22 · 09-09-2013, 12:13 PM

Quote:

Originally Posted by ajrcow

TCIII is much lighter over the XD9 and ADVAN has a better offset and clearance for calipers, I willl prefer concave face over lip

Here's a pic that I stole from my friend's site :

He has AP Racing brakes and still has lots of room !

With running full tread to fit the wheel like 255/265, you will need coil-overs with camber plates and camber kit to make it to work.

Where can I find more pictures of this car?

Perry · 09-09-2013, 09:49 PM

Advans +1

ajrcow · 09-09-2013, 11:03 PM

Quote:

Originally Posted by Stevo22

Where can I find more pictures of this car?

I took it off from his Facebook. Here's a few more that I found !

PRORICAN · 09-10-2013, 01:34 AM

^^^Looks great! Can't wait to mount mine!

Ps- apparently I got the very last matte black set in the country! Lucky me! Lol

View Poll Results: Pick your preference
Advan TCIII	62	72.94%
Work XD9	23	27.06%
Voters: 85. You may not vote on this poll

09-07-2013, 11:42 PM	#17
PRORICAN Senior Member Join Date: Jun 2012 Drives: BRZ Location: Cape Cod Posts: 804 Thanks: 872 Thanked 560 Times in 258 Posts Mentioned: 27 Post(s) Tagged: 0 Thread(s)	Man, that poll is 50/50 Lol! I think I'm going with the advans just because I can't get over the fact that I won't be able to use a bbk unless I add a 20mm spacer. Was also contemplating either Work emotion kiwamis or rays 57extreme but those are def a little played out with the twins. So back to the tciii's! __________________ BeastCoast.US feature http://beastcoast.us/2013/11/28/all-the-right-moves/ Build Thread http://www.ft86club.com/forums/showthread.php?t=8204

09-08-2013, 03:03 AM	#22
ajrcow Member Join Date: Dec 2012 Drives: Scion FRS Location: Vancouver BC Posts: 42 Thanks: 0 Thanked 21 Times in 11 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	TCIII is much lighter over the XD9 and ADVAN has a better offset and clearance for calipers, I willl prefer concave face over lip Here's a pic that I stole from my friend's site : He has AP Racing brakes and still has lots of room ! With running full tread to fit the wheel like 255/265, you will need coil-overs with camber plates and camber kit to make it to work. __________________ MY13 FRS Firestorm T1R coil-overs / TE37SL + 255 square / TRD kit

09-09-2013, 11:37 AM	#24
PRORICAN Senior Member Join Date: Jun 2012 Drives: BRZ Location: Cape Cod Posts: 804 Thanks: 872 Thanked 560 Times in 258 Posts Mentioned: 27 Post(s) Tagged: 0 Thread(s)	Made my decision and picking up the wheels today. Thanks for the help guys! My first set of advans coming soon! __________________ BeastCoast.US feature http://beastcoast.us/2013/11/28/all-the-right-moves/ Build Thread http://www.ft86club.com/forums/showthread.php?t=8204

09-10-2013, 01:34 AM	#28
PRORICAN Senior Member Join Date: Jun 2012 Drives: BRZ Location: Cape Cod Posts: 804 Thanks: 872 Thanked 560 Times in 258 Posts Mentioned: 27 Post(s) Tagged: 0 Thread(s)	^^^Looks great! Can't wait to mount mine! Ps- apparently I got the very last matte black set in the country! Lucky me! Lol __________________ BeastCoast.US feature http://beastcoast.us/2013/11/28/all-the-right-moves/ Build Thread http://www.ft86club.com/forums/showthread.php?t=8204

09-07-2013, 11:05 AM	#15
Vten Senior Member Join Date: Aug 2012 Drives: Too heavy Location: Columbus Posts: 788 Thanks: 91 Thanked 288 Times in 186 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	I would go with the Advans

09-09-2013, 09:49 PM	#26
Perry Member Join Date: May 2013 Drives: 86 Raven Location: Liberty, TX Posts: 51 Thanks: 25 Thanked 3 Times in 3 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Advans +1

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: SoCal Toyo R888, Advan TCiii, Volk GTN	JadeBRZ	Wheels and Tires	4	11-29-2012 04:42 PM
Work, Rays, Volk, Vossen, Stance, Advan, Wedsport, XXR Wheels and More !!!!	IslandImportPerformance	Wheels and Tires	1	06-18-2012 08:38 PM

User Name		Remember Me?
Password