Innovate (Sprintex) Supercharger Owners Topic - Page 105 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

diss7 · 09-08-2013, 01:18 AM

Quote:

Originally Posted by FRSRAVEN

Possibly increased belt wear or the belt coming off the pulley. Perhaps some increased bearing wear on the hub assembly itself due to balance issues. But the question becomes.

Is the .4mm of runout reported by diss7 enough to cause these issues? I don't know.

You have to remember, that the 0.4mm on the a ~25mm hub would then be 3x as bad on a ~70mm pulley

You can see what it looks like in the video I linked to in my build thread. You don't want the pulley 0.1mm on the piss, let alone 1.5mm.

Re serial numbers, posted pics of both up.

xjohnx · 09-08-2013, 07:58 PM

what're you guys using for widebands?

Frostyman · 09-08-2013, 08:28 PM

i've inspected mine very carefully both while still, and while running, there is no wobble, or off-balance motion at all. it's smooth as can be.

Anaxilus · 09-08-2013, 11:22 PM

Quote:

Originally Posted by Frostyman

i've inspected mine very carefully both while still, and while running, there is no wobble, or off-balance motion at all. it's smooth as can be.

What does carefully mean? Visually or w/ a dial indicator?

Out of curiosity, how well packaged are the units during shipping? I'm wondering if maybe there's a third party at fault nobody has thought about.

diss7 · 09-08-2013, 11:28 PM

The units could be shipped better. But its not being bent in shipping. Its poor maching of the hub that is the problem.

I need to get some pics up so its clearer what to look for.

Adeets · 09-09-2013, 08:38 AM

Anyone have the links for the innovate moto-east tunes, E85, or 93, I remember seeing one around 265whp, I'm stuck on my phone ATM, so search = shit.

lbroskee · 09-09-2013, 09:47 AM

Quote:

Originally Posted by Adeets

Anyone have the links for the innovate moto-east tunes, E85, or 93, I remember seeing one around 265whp, I'm stuck on my phone ATM, so search = shit.

talk to @wrxgoose

swift996 · 09-09-2013, 09:49 AM

Quote:

Originally Posted by Adeets

Anyone have the links for the innovate moto-east tunes, E85, or 93, I remember seeing one around 265whp, I'm stuck on my phone ATM, so search = shit.

I'm running the Moto-East tune. The one guy running 265whp is not. I plan to hit the dyno again soon but I'd estimate 255-260whp on E85 and 230whp on 93.

xjohnx · 09-09-2013, 10:26 AM

Quote:

Originally Posted by Adeets

Anyone have the links for the innovate moto-east tunes, E85, or 93, I remember seeing one around 265whp, I'm stuck on my phone ATM, so search = shit.

Quote:

Originally Posted by swift996

I'm running the Moto-East tune. The one guy running 265whp is not. I plan to hit the dyno again soon but I'd estimate 255-260whp on E85 and 230whp on 93.

Here's my E85 dyno from @moto-mike's tune on map 4 (the more aggressively timed E85 map)

We had to kill the run at 6500RPM's because of an issue with the wideband on the dyno, but it looked on track to break 250 pretty easily. I'll be re-doing these runs once I get my own wideband installed.

Speaking of widebands - what're you guys using? any recommendations? I like the AEM Failsafe for their datalogging capabilities and reviews, but not sure how the failsafe would be implemented w/ the innovate or if i'd just not use that portion.

RedLeader · 09-09-2013, 10:38 AM

Quote:

Originally Posted by xjohnx

Speaking of widebands - what're you guys using? any recommendations? I like the AEM Failsafe for their datalogging capabilities and reviews, but not sure how the failsafe would be implemented w/ the innovate or if i'd just not use that portion.

From what I understand, the AEM doesn't interface directly with ecutek software (don't know of moto-mike is using that or brzedit) and I'm not sure about if it works directly with brzedit. If not, it has to be setup independently, and the data logging benefits are just duplicating what ecutek and brzedit already do. Our cars already come with a wideband 02 sensor, but if you're upgrading, innovate makes a wideband o2 sensor and controller and a whole logging and acquisition suite. They've been doing that longer than they've been in the supercharger business. Might be worth it to look into theirs.

Sent from...somewhere?

evo4g63 · 09-09-2013, 10:41 AM

I will be re dynoing on a Dynojet in the next week or so. I shall post my new numbers off of that once the shop can confirm a Saturday that works for them.

wrxgoose · 09-09-2013, 10:59 AM

Quote:

Originally Posted by Adeets

Anyone have the links for the innovate moto-east tunes, E85, or 93, I remember seeing one around 265whp, I'm stuck on my phone ATM, so search = shit.

I'm using @JuniorAWD for my tunes, and i'm on 93 octane.

sorry, just woke up. ask, and he or i can probably give more info

Adeets · 09-09-2013, 11:02 AM

Quote:

Originally Posted by wrxgoose

I'm using @JuniorAWD for my tunes, and i'm on 93 octane.

sorry, just woke up. ask, and he or i can probably give more info

Your 265 pull was done on 93 octane, and that's it no meth/water?

wrxgoose · 09-09-2013, 11:06 AM

correct

09-09-2013, 08:38 AM	#1462
Adeets OEDC Join Date: Oct 2012 Drives: Vortech 8.5psi 274WHP 2013 BRZ Location: Pa Posts: 619 Thanks: 117 Thanked 263 Times in 159 Posts Mentioned: 15 Post(s)	Anyone have the links for the innovate moto-east tunes, E85, or 93, I remember seeing one around 265whp, I'm stuck on my phone ATM, so search = shit. __________________ My BRZ FI Build Visconti is like a Tick that sucks as much blood(money) as he can before you figure out he's there. please make sure to leave your experiences with visconti on his feedback thread located here: Visconti feedback

09-09-2013, 10:41 AM	#1467
evo4g63 Senior Member Join Date: Jan 2013 Drives: 2016 Subaru WRX Location: Phoenix, AZ Posts: 979 Thanks: 235 Thanked 329 Times in 231 Posts Mentioned: 33 Post(s)	I will be re dynoing on a Dynojet in the next week or so. I shall post my new numbers off of that once the shop can confirm a Saturday that works for them. __________________ -2016 Subaru WRX -2013 Scion FR-S: Wastegated Vortech V3'd, E85 SOLD

09-09-2013, 11:06 AM	#1470
wrxgoose WUB WUB Join Date: Aug 2012 Drives: 2013 Firestorm Location: Charlotte Posts: 2,788 Thanks: 313 Thanked 1,573 Times in 858 Posts Mentioned: 52 Post(s)	correct __________________ Build thread: http://www.ft86club.com/forums/showthread.php?t=40850 no more blower power

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Innovative ideas to increase interior storage capacity?	swift996	Cosmetic Modification (Interior/Exterior/Lighting)	0	01-30-2013 10:45 PM
AVO vs Innovative	diss7	Forced Induction	32	01-21-2013 06:15 PM
Not another need to drive topic	Sargy	Mid-Atlantic	5	11-27-2012 12:18 PM
Technical topic sub-forums	OrbitalEllipses	Site Announcements / Questions / Issues	1	07-17-2012 11:38 PM
Can you close the topic please?	Standardsuspension	Brakes, Suspension, Chassis	14	06-26-2012 05:14 PM

09-08-2013, 07:58 PM	#1458
xjohnx Grip>Slip Join Date: Jun 2012 Drives: 13 SWP BRZ Ltd - Innovate Powered! Location: RVA Posts: 3,563 Thanks: 656 Thanked 1,717 Times in 1,031 Posts Mentioned: 45 Post(s)	what're you guys using for widebands?

09-08-2013, 11:28 PM	#1461
diss7 Banned Join Date: Sep 2012 Drives: AE86, 2x GT86, TE27 Location: Christchurch NZ Posts: 1,478 Thanks: 826 Thanked 1,181 Times in 522 Posts Mentioned: 33 Post(s)	The units could be shipped better. But its not being bent in shipping. Its poor maching of the hub that is the problem. I need to get some pics up so its clearer what to look for.

User Name		Remember Me?
Password