Innovate (Sprintex) Supercharger Owners Topic - Page 91 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

FA20Club.com · 08-27-2013, 10:56 PM

we also have a PNP harness that goes along with it no hacking on your part. we will package it as a kit with sensors and PNP harness.

xsuperbeex · 08-27-2013, 11:22 PM

Quote:

Originally Posted by RedLeader

49422
49423

Acceptable?

Sent from...somewhere?

Sweet thanks man.. i was just scared it wouldnt clear the strut.. with this i can safely purchase the supercharger if i end up going fi

evo4g63 · 08-27-2013, 11:57 PM

Quote:

Originally Posted by FA20Club.com

LOL i showed you the picture, it didnt make the plane with me. Didnt want it confiscated by the TSA's

Dang it. Well looks like this and a pulley are a must now

xxscaxx · 08-28-2013, 12:25 AM

For those who have the gates reinforced belt - is it me or is this thing damn near impossible to get on? I thought I was going to damage it, it was that hard to put on. I couldn't get the belt on the last tooth of the pulley I was trying to slip it on (the sc pulley).

I bought it along with the 70mm pulley but wanted to install it since I am getting a squeal and wanted to rule out the belt.

lbroskee · 08-28-2013, 12:28 AM

Quote:

Originally Posted by FA20Club.com

Tuesday night Porn......

at what point is this required for this kit?

NickFRS · 08-28-2013, 12:40 AM

Quote:

Originally Posted by xxscaxx

For those who have the gates reinforced belt - is it me or is this thing damn near impossible to get on? I thought I was going to damage it, it was that hard to put on. I couldn't get the belt on the last tooth of the pulley I was trying to slip it on (the sc pulley).

I bought it along with the 70mm pulley but wanted to install it since I am getting a squeal and wanted to rule out the belt.

Try doing the grooved pulleys first and slip the belt on a smooth pulley last.

Also did this fix your squeal? I'm quite sure we share the same issue.

xxscaxx · 08-28-2013, 12:48 AM

Quote:

Originally Posted by NickFRS

Try doing the grooved pulleys first and slip the belt on a smooth pulley last.

Also did this fix your squeal? I'm quite sure we share the same issue.

Tried that too. Couldn't get it on that way.

I ended up putting the stock belt back on. I'll swap the belt during the weekend with a buddy instead of trying to do it alone lol.

Andy@FA20Club · 08-28-2013, 10:28 AM

Quote:

Originally Posted by FA20Club.com

Tuesday night Porn......

Let the Cat out the bag #2 is out.

swift996 · 08-28-2013, 12:41 PM

I will try to get a plot from my logs at the track but I saw as high as 8.5 - 9.1 psi of boost.

sw20kosh · 08-28-2013, 03:48 PM

Sorry guys, giving up on the twin screw. Going twin turbo instead. 2JZ swap incoming!

JK

Frostyman · 08-28-2013, 04:12 PM

Quote:

Originally Posted by Andy@FA20Club

Let the Cat out the bag #2 is out.

okay, so if the sensor is #2, does the 66mm pulley count as 3, or is 3 still a secret?

Frostyman · 08-28-2013, 04:13 PM

Quote:

Originally Posted by sw20kosh

JK

lol. you had me for a second.

lbroskee · 08-28-2013, 04:17 PM

Quote:

Originally Posted by Frostyman

okay, so if the sensor is #2, does the 66mm pulley count as 3, or is 3 still a secret?

Either the pulley or the intercooled setup he said they'd test it on

evo4g63 · 08-28-2013, 04:23 PM

Quote:

Originally Posted by sw20kosh

Sorry guys, giving up on the twin screw. Going twin turbo instead. 2JZ swap incoming!

JK

I was going to say that's not a 2Jz GTE. That's an NA motor

08-28-2013, 12:41 PM	#1269
swift996 Senior Member Join Date: Nov 2011 Drives: Subaru BRZ Limited 6MT Location: Winston-Salem, NC Posts: 2,432 Thanks: 712 Thanked 955 Times in 545 Posts Mentioned: 47 Post(s) Tagged: 0 Thread(s)	I will try to get a plot from my logs at the track but I saw as high as 8.5 - 9.1 psi of boost. __________________ Innovate Supercharged Black Limited BRZ 6-Speed MT(Build Thread) 2010 Cadillac CTS-V Sedan M6 w/550whp (Build Thread)

08-28-2013, 03:48 PM	#1270
sw20kosh Senior Member Join Date: Jul 2012 Drives: 2013 Black FR-S Location: SF Posts: 3,030 Thanks: 881 Thanked 2,014 Times in 990 Posts Mentioned: 153 Post(s) Tagged: 1 Thread(s)	Sorry guys, giving up on the twin screw. Going twin turbo instead. 2JZ swap incoming! JK __________________ 86DRIVE Challenge Last edited by sw20kosh; 08-28-2013 at 04:04 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Innovative ideas to increase interior storage capacity?	swift996	Cosmetic Modification (Interior/Exterior/Lighting)	0	01-30-2013 11:45 PM
AVO vs Innovative	diss7	Forced Induction	32	01-21-2013 07:15 PM
Not another need to drive topic	Sargy	Mid-Atlantic	5	11-27-2012 01:18 PM
Technical topic sub-forums	OrbitalEllipses	Site Announcements / Questions / Issues	1	07-18-2012 12:38 AM
Can you close the topic please?	Standardsuspension	Brakes, Suspension, Chassis	14	06-26-2012 06:14 PM

08-27-2013, 10:56 PM	#1261
FA20Club.com Banned Join Date: Aug 2012 Drives: 2013 White Out FR-S Location: Florida Posts: 1,335 Thanks: 24 Thanked 1,162 Times in 501 Posts Mentioned: 323 Post(s) Tagged: 2 Thread(s)	we also have a PNP harness that goes along with it no hacking on your part. we will package it as a kit with sensors and PNP harness.

08-28-2013, 12:25 AM	#1264
xxscaxx Senior Member Join Date: Jul 2012 Drives: 2013 SWP BRZ Location: New York Posts: 2,240 Thanks: 458 Thanked 878 Times in 556 Posts Mentioned: 34 Post(s) Tagged: 0 Thread(s)	For those who have the gates reinforced belt - is it me or is this thing damn near impossible to get on? I thought I was going to damage it, it was that hard to put on. I couldn't get the belt on the last tooth of the pulley I was trying to slip it on (the sc pulley). I bought it along with the 70mm pulley but wanted to install it since I am getting a squeal and wanted to rule out the belt.

User Name		Remember Me?
Password