ALL ARIZONA FR-S/BRZ OWNERS HOME PAGE

[FR-Shadow]

Originally Posted by evo4g63

If you buy the correct blue tape it works great

Yeah...just bad experience i guess.

Scotch blue painters tape.

[evo4g63]

Originally Posted by FR-Shadow

Yeah...just bad experience i guess.

Scotch blue painters tape.

Only use 3M and buy the low adhesion tape. Water will cause slight residue and I wouldn't rec to leave it on for more than a 14hr period. For a 5-6hr drive it be fine.

[redsuns03]

Originally Posted by evo4g63

Only use 3M and buy the low adhesion tape. Water will cause slight residue and I wouldn't rec to leave it on for more than a 14hr period. For a 5-6hr drive it be fine.

I might consider this since I didn't even think about it when I drove to cali last month.

Where would you tape exactly?

Sent from my SGH-T999 using Tapatalk 4

[ronnBOi720]

Originally Posted by redsuns03

I might consider this since I didn't even think about it when I drove to cali last month.

Where would you tape exactly?

Sent from my SGH-T999 using Tapatalk 4

Just the front bumper and the side mirrors will be fine

Sent from Galaxy S3

[Ninjin]

Originally Posted by ronnBOi720

Just the front bumper and the side mirrors will be fine

Sent from Galaxy S3

I would consider doing the A pillars too. I have a small chip on one of mine.

Sent from my SGH-M919 using Tapatalk 4

[freerangebacon]

Im thinking tape also how is the paint defender shit??? Work well??

[Bonks86]

Originally Posted by evo4g63

Only use 3M and buy the low adhesion tape. Water will cause slight residue and I wouldn't rec to leave it on for more than a 14hr period. For a 5-6hr drive it be fine.

If you want to get rid of the residue (if there even is any, 3M works great) Just give her a quick wipe down with some goo gone spray on a rag and she'll be good to go

[evo4g63]

Originally Posted by Bonks86

If you want to get rid of the residue (if there even is any, 3M works great) Just give her a quick wipe down with some goo gone spray on a rag and she'll be good to go

I have never had residue marks from 3M light adhesion tape. If someone gets it though quick detailed takes it off.

[nelsmar]

Originally Posted by fst86frs

Thanks everyone! I hope to do lots with this car as much as my last car. The shop I work for is Forced Air Technologies near Tempe/Phoenix. Can't wait to meetup more and work on this car in this great community!

Aaron? :P

[nelsmar]

Originally Posted by ronnBOi720

Just the front bumper and the side mirrors will be fine

Sent from Galaxy S3

Originally Posted by Ninjin

I would consider doing the A pillars too. I have a small chip on one of mine.

Sent from my SGH-M919 using Tapatalk 4

Bumper, 1/3 of hood, mirrors, 1/3 fender. Anything else if your anal.

If you have agressive wheels from the top center of the fender slanting back about 1/3 of the fender behind front to avoid turning tossing up rocks.

Or you go like me, don't wash the car, buy a clear bra to make the paint last 1 year longer than the 2 years it will stay painted before nothing is left but chips & dings from highway driving back and forth to California. Mmmmm photoshop cream. :P

[Sivtec]

Originally Posted by freerangebacon

What are some people doing to protect there front bumper for the drive to cash cali tomorrow??

Clearbra? Hehe. I knew that would be a good investment

[Ninjin]

More tires?

More tires.




Sent from my SGH-M919 using Tapatalk 4

[nelsmar]

MOAR TIRES! Shit i just realized that after the dyno day ill have exactly 48hours to buy new tires... FUUUUUUUU

[Ninjin]

Originally Posted by nelsmar

MOAR TIRES! Shit i just realized that after the dyno day ill have exactly 48hours to buy new tires... FUUUUUUUU

Why 48 hours?

P.S. The Costco coupon on Bridgestones has been extended until September 1. Also stock size RE-11As are on backorder, but if you ask a manager they should be able to get the discount set up anyways.