Innovate (Sprintex) Supercharger Owners Topic - Page 54 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

xjohnx · 08-02-2013, 03:34 PM

Quote:

Originally Posted by xxscaxx

Honestly, it is very rare to see such quick action (at least to me) taken by a company on something like that. Let alone expediting the part. Its good to know that if anything was to go wrong they have our backs.

+1 to @mines13 and Innovate.

Agreed. Just something for people to doublecheck before they get started pulling stuff apart for the install. There's a similar plug/clip on the front side as well to check.

Oddly enough however, the clip was missing in their installation documentation as well.

xxscaxx · 08-02-2013, 03:57 PM

Quote:

Originally Posted by xjohnx

Agreed. Just something for people to doublecheck before they get started pulling stuff apart for the install. There's a similar plug/clip on the front side as well to check.

Oddly enough however, the clip was missing in their installation documentation as well.

hm, i'm going to have to check for that. Don't even recall seeing that thing lol. Thanks for the heads up.

xjohnx · 08-02-2013, 04:01 PM

Quote:

Originally Posted by xxscaxx

hm, i'm going to have to check for that. Don't even recall seeing that thing lol. Thanks for the heads up.

Have you already installed it? if so, you'd know if the clip was missing, the first time Brady rev'd it the plug shot out of the back and the SC got much louder (obviously).

Apparently the reason they are there is that they are used for the stg2 intercooler upgrade.

xxscaxx · 08-02-2013, 04:29 PM

Quote:

Originally Posted by xjohnx

Have you already installed it? if so, you'd know if the clip was missing, the first time Brady rev'd it the plug shot out of the back and the SC got much louder (obviously).

Apparently the reason they are there is that they are used for the stg2 intercooler upgrade.

haha yeah I installed it - I am pretty sure its there but no harm in checking.

mines13 · 08-02-2013, 04:41 PM

Quote:

Originally Posted by xjohnx

Agreed. Just something for people to doublecheck before they get started pulling stuff apart for the install. There's a similar plug/clip on the front side as well to check.

Oddly enough however, the clip was missing in their installation documentation as well.

It is not documented as it would typically be already installed on the unit. This part is not on the component list, nor are there mounting instructions because of this. That said, it is a very easy part to install.

mines13 · 08-02-2013, 04:42 PM

Quote:

Originally Posted by xxscaxx

haha yeah I installed it - I am pretty sure its there but no harm in checking.

If it was not there, you would not be able to build any boost.

xjohnx · 08-02-2013, 04:44 PM

Quote:

Originally Posted by mines13

It is not documented as it would typically be already installed on the unit. This part is not on the component list, nor are there mounting instructions because of this. That said, it is a very easy part to install.

oh i know, i wasn't suggesting your documentation was lacking instructions. I was just pointing out that the clip was also missing in the picture included in the documentation.

evo4g63 · 08-02-2013, 06:15 PM

Where may i pick up a 70mm pulley?

DarrenDriven · 08-02-2013, 07:52 PM

Quote:

Originally Posted by DeliciousTuning

Thought everyone might like this. We just finished a Flex Fuel tune on the Innovate Supercharger with the following modifications. On a dyno jet we would expect about 260-270whp on this setup...

...Cheers,
William Knose

Does that 86 belong to an owner who has a membership on this forum? Can you find out?

DriftEm · 08-02-2013, 08:03 PM

Quote:

Originally Posted by DarrenDriven

Does that 86 belong to an owner who has a membership on this forum? Can you find out?

Yes, it's my car

Sent from my SGH-I317 using Tapatalk 2

evo4g63 · 08-02-2013, 08:22 PM

Quote:

Originally Posted by DriftEm

Yes, it's my car

Sent from my SGH-I317 using Tapatalk 2

Congrats on the #'s

FRSRAVEN · 08-02-2013, 09:42 PM

Quote:

Originally Posted by DeliciousTuning

Thought everyone might like this. We just finished a Flex Fuel tune on the Innovate Supercharger with the following modifications. On a dyno jet we would expect about 260-270whp on this setup.

Next couple items for this vehicle:
- 70mm Pulley Upgrade
- Innovate Intercooler Upgrade

On a dyno jet (with the additional upgrades) this should net us right around 300whp and we are seeing if we can continue to use the OEM injectors.

We also just added launch control, flat foot shifting and auto-blip to this vehicle. More to come...

Cheers,
William Knose

Whats the difference between this car with E85, and Robi's car? I noticed on his pure E85 tune, he is making about 25whp more. Does the weight reduction on his drivetrain increase his dyno numbers that much?

Still, excellent numbers. I'm ordering an Innovate kit very soon, and I've been shopping around tuners. Your website is easy to navigate, and everything is clearly explained. One question, I noticed of your tunes were for 91 octane. Being from California, this is to be expected, but do you offer 93 octane tunes for those of use in other states?

Thank you!

DriftEm · 08-02-2013, 10:36 PM

Quote:

Originally Posted by FRSRAVEN

Whats the difference between this car with E85, and Robi's car? I noticed on his pure E85 tune, he is making about 25whp more. Does the weight reduction on his drivetrain increase his dyno numbers that much?

Still, excellent numbers. I'm ordering an Innovate kit very soon, and I've been shopping around tuners. Your website is easy to navigate, and everything is clearly explained. One question, I noticed of your tunes were for 91 octane. Being from California, this is to be expected, but do you offer 93 octane tunes for those of use in other states?

Thank you!

Robi is running the 70mm pulley and more aggressive tune, this tune is very safe with the stock 75mm pulley

whitefrs · 08-02-2013, 10:38 PM

@xxscaxx who tuned ur car?

08-02-2013, 06:15 PM	#750
evo4g63 Senior Member Join Date: Jan 2013 Drives: 2016 Subaru WRX Location: Phoenix, AZ Posts: 979 Thanks: 235 Thanked 329 Times in 231 Posts Mentioned: 33 Post(s) Tagged: 0 Thread(s)	Where may i pick up a 70mm pulley? __________________ -2016 Subaru WRX -2013 Scion FR-S: Wastegated Vortech V3'd, E85 SOLD

08-02-2013, 10:38 PM	#756
whitefrs Love Boost!!!!!!!! Join Date: Jun 2012 Drives: Whiteout Scion FR-S Location: Long Island NY Posts: 3,612 Thanks: 429 Thanked 902 Times in 606 Posts Mentioned: 87 Post(s) Tagged: 3 Thread(s)	@xxscaxx who tuned ur car? __________________ ༼ つ ◕_◕ ༽つ I LOVE BOOST ༼ つ ◕_◕ ༽つ

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Innovative ideas to increase interior storage capacity?	swift996	Cosmetic Modification (Interior/Exterior/Lighting)	0	01-30-2013 11:45 PM
AVO vs Innovative	diss7	Forced Induction	32	01-21-2013 07:15 PM
Not another need to drive topic	Sargy	Mid-Atlantic	5	11-27-2012 01:18 PM
Technical topic sub-forums	OrbitalEllipses	Site Announcements / Questions / Issues	1	07-18-2012 12:38 AM
Can you close the topic please?	Standardsuspension	Brakes, Suspension, Chassis	14	06-26-2012 06:14 PM

User Name		Remember Me?
Password