Visconti Tuning - Latest BRZ Flash Info - Page 419 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

djliquidsteele · 07-24-2013, 11:03 AM

I had that too, but I assumed it was because I didn't let the car idle for 5-10 minutes after I flashed. I cleared the dtc and haven't had a problem since.

Sorry this was in response to the cam sensor cel carwhisperer got.

popos1907 · 07-24-2013, 02:34 PM

My kit supposed to be delivered today. Can't wait to get my first tune

Nightbringer · 07-24-2013, 02:52 PM

Quote:

Originally Posted by popos1907

My kit supposed to be delivered today. Can't wait to get my first tune

Definitely let us know first impressions.

Always fun hearing the first-time tune reactions haha.

Ryan86 · 07-24-2013, 03:02 PM

Hopefully not a stupid question.
I have installed header and fitted the O2 sensors directly to the header without any spacers, as the StG 2 tune would prevent any CEL.
I run Torque Pro most of the time to keep track on how the car is performing, when I noticed the Cat temp up at 740 degrees, which is almost 100 degrees more than the car normally operates at.
Would the increase in temp registered by the ECU, do anything to the car to counter the heat readings and possibly affect the tune performance.??

qoncept · 07-24-2013, 03:07 PM

Quote:

Originally Posted by Ryan86

Would the increase in temp registered by the ECU, do anything to the car to counter the heat readings and possibly affect the tune performance.??

I don't have experience with the BRZ but most likely it shouldn't. In everything I've worked with you truly disable the CEL, not hack your way around it.

Carwhisperer · 07-24-2013, 11:47 PM

Anyone using a K&N typhoon CAI?

Sensisnow · 07-25-2013, 12:07 AM

Quote:

Originally Posted by Ryan86

Hopefully not a stupid question.
I have installed header and fitted the O2 sensors directly to the header without any spacers, as the StG 2 tune would prevent any CEL.
I run Torque Pro most of the time to keep track on how the car is performing, when I noticed the Cat temp up at 740 degrees, which is almost 100 degrees more than the car normally operates at.
Would the increase in temp registered by the ECU, do anything to the car to counter the heat readings and possibly affect the tune performance.??

The tune is already taking those factors into account, so you have nothing to worry about.

Norcalmav23 · 07-25-2013, 03:45 AM

I just experienced Racerom for the first time tonight. Pretty decent drive. Launch control is amazing, so sweet how it is adjustable. Flat foot shifting?!?! It's too good to be true. The way it works, has that awesome blip sound... flat foot shifting is incredible. Finally... I still haven't mastered it, but the auto blip is very cool, I will have to get better at using it. Awesome stuff!

Bahraini86 · 07-25-2013, 07:07 AM

Quote:

Originally Posted by Norcalmav23

I just experienced Racerom for the first time tonight. Pretty decent drive. Launch control is amazing, so sweet how it is adjustable. Flat foot shifting?!?! It's too good to be true. The way it works, has that awesome blip sound... flat foot shifting is incredible. Finally... I still haven't mastered it, but the auto blip is very cool, I will have to get better at using it. Awesome stuff!

Good to hear that you are enjoying this... Can't wait to get mine flashed

popos1907 · 07-25-2013, 05:50 PM

so im trying to flash my car and I try to open the file that john sent me and it says not supported whats up with this anybody know??

popos1907 · 07-25-2013, 05:52 PM

once I get to the part where it says load up rom file to program and I click the file that john sent me it gives me a error message and says the file is not supported and says to contact tuner for correct file

ft86me · 07-25-2013, 05:53 PM

Quote:

Originally Posted by popos1907

once I get to the part where it says load up rom file to program and I click the file that john sent me it gives me a error message and says the file is not supported and says to contact tuner for correct file

I would say open a support ticket with John and put priority as high

Sensisnow · 07-25-2013, 05:54 PM

Check the log on right side and verify that the dongle ID that it shows matches the label on your dongle. My first dongle was mislabled, so the tune file didn't match the ID that my computer detected.

popos1907 · 07-25-2013, 05:56 PM

the numbers match yea I guess ima do that was looking forward to getting off and flashing my car

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LED Front Signals with Resistor Flash Correctors	DarrenDriven	Cosmetic Modification (Interior/Exterior/Lighting)	38	09-20-2012 03:05 PM
Brz Info/Specs (helpful info for questions asked often)	Gaen	BRZ First-Gen (2012+) — General Topics	0	05-24-2012 11:09 PM
How to embed a flash gallery?	DarrenDriven	Site Announcements / Questions / Issues	2	04-24-2012 08:43 PM
Production Spec Subaru BRZ Previewed at National Conference & Latest Info/Rumors	blur	BRZ First-Gen (2012+) — General Topics	130	09-01-2011 02:42 PM

07-24-2013, 11:03 AM	#5853
djliquidsteele Senior Member Join Date: Apr 2012 Drives: Scion FR-S Location: Louisville, KY Posts: 498 Thanks: 62 Thanked 130 Times in 92 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	I had that too, but I assumed it was because I didn't let the car idle for 5-10 minutes after I flashed. I cleared the dtc and haven't had a problem since. Sorry this was in response to the cam sensor cel carwhisperer got.

07-24-2013, 02:34 PM	#5854
popos1907 Member Join Date: Feb 2013 Drives: 13' FRS, 95' Nissan 240SX Location: Houston, TX Posts: 50 Thanks: 1 Thanked 4 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	My kit supposed to be delivered today. Can't wait to get my first tune

07-24-2013, 03:02 PM	#5856
Ryan86 Road Warrior Join Date: Nov 2012 Drives: Toyota 86 Satin Pearl White Location: Durban, South Africa Posts: 1,651 Thanks: 181 Thanked 544 Times in 359 Posts Mentioned: 59 Post(s) Tagged: 0 Thread(s)	Hopefully not a stupid question. I have installed header and fitted the O2 sensors directly to the header without any spacers, as the StG 2 tune would prevent any CEL. I run Torque Pro most of the time to keep track on how the car is performing, when I noticed the Cat temp up at 740 degrees, which is almost 100 degrees more than the car normally operates at. Would the increase in temp registered by the ECU, do anything to the car to counter the heat readings and possibly affect the tune performance.??

07-24-2013, 11:47 PM	#5858
Carwhisperer Senior Member Join Date: Jan 2012 Drives: A lot of supercars. Location: USA Posts: 495 Thanks: 237 Thanked 148 Times in 90 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Anyone using a K&N typhoon CAI?

07-25-2013, 03:45 AM	#5860
Norcalmav23 Senior Member Join Date: Mar 2012 Drives: SWP Limited manual BRZ Location: San Jose, CA Posts: 146 Thanks: 73 Thanked 55 Times in 33 Posts Mentioned: 12 Post(s) Tagged: 1 Thread(s)	I just experienced Racerom for the first time tonight. Pretty decent drive. Launch control is amazing, so sweet how it is adjustable. Flat foot shifting?!?! It's too good to be true. The way it works, has that awesome blip sound... flat foot shifting is incredible. Finally... I still haven't mastered it, but the auto blip is very cool, I will have to get better at using it. Awesome stuff!

07-25-2013, 05:50 PM	#5862
popos1907 Member Join Date: Feb 2013 Drives: 13' FRS, 95' Nissan 240SX Location: Houston, TX Posts: 50 Thanks: 1 Thanked 4 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	so im trying to flash my car and I try to open the file that john sent me and it says not supported whats up with this anybody know??

07-25-2013, 05:52 PM	#5863
popos1907 Member Join Date: Feb 2013 Drives: 13' FRS, 95' Nissan 240SX Location: Houston, TX Posts: 50 Thanks: 1 Thanked 4 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	once I get to the part where it says load up rom file to program and I click the file that john sent me it gives me a error message and says the file is not supported and says to contact tuner for correct file

07-25-2013, 05:56 PM	#5866
popos1907 Member Join Date: Feb 2013 Drives: 13' FRS, 95' Nissan 240SX Location: Houston, TX Posts: 50 Thanks: 1 Thanked 4 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	the numbers match yea I guess ima do that was looking forward to getting off and flashing my car

User Name		Remember Me?
Password