supra2nv's GT86 (inspired by 14R TRD Griffon, and a lil bit of NSX)

[nzer]

Originally Posted by supra2nv

ok I need to order these they refine the car under there..

Found the install DIY but still looking for the parts. Sounds like imported from Japan but can't see them on japanparts

http://www.ft86club.com/forums/showt...ht=body+panels

[nzer]

Originally Posted by supra2nv

love it!

bro, the techs stayed late tonight only to get that BBK on the front lol..they said "we wanted to see them on there man..." lol!!!!! I got a picture from them late, I was shocked to see the calipers on there because I left at near closing time...they are very picky...even the tires on the wheels, look, they lined up not only the center caps, but also, the tires, the markers on the tires, they all line up the same way on each wheel...freaking perfectionists. they put the outside marker dot right where the valve stem is on each wheel...cool

Great you've got good technicians.

I found the BRZ version. Assume same as FRS version given says ZN6 chassis.
http://www.japanparts.com/db/parts_d...=&SEARCH_page=

[switchlanez]

Originally Posted by nzer

Found the install DIY but still looking for the parts. Sounds like imported from Japan but can't see them on japanparts

http://www.ft86club.com/forums/showt...ht=body+panels

I could only find it under their BRZ parts search. Edited my earlier post to include the jparts link:

Originally Posted by switchlanez

Many of us have been getting this kit from japanparts.com. I think around $320 shipped but it's been awhile and the yen:USD conversion rate fluctuates.

Edit: Right now it's $269 shipped to where I am in the Midwest: http://www.japanparts.com/db/parts_d...=&SEARCH_page=

Edit: Seems you found it too.

[supra2nv]

Bbk 6 pot front

edit: yes, I know they are brembos, yes I know brembos are less costly. but I wanted the lettering

[nzer]

Originally Posted by supra2nv

Bbk 6 pot front

Ooh baby! Looks beautiful. Just like mine.

You'll be wanting to take your wheels off to clean inside them along with your callipers and coil overs. I bought a trolley jack so I old do that. My wife thinks I'm crazy - obsessed certainly!

[supra2nv]

Originally Posted by nzer

Ooh baby! Looks beautiful. Just like mine.

You'll be wanting to take your wheels off to clean inside them along with your callipers and coil overs. I bought a trolley jack so I old do that. My wife thinks I'm crazy - obsessed certainly!

thanks bro, yours as well. your car was inspiration homey u know that right?

edit: we might have been thinking of it in parallel tho is my guess, because I was thinking about it before I saw your car lol!

edit 2: you were first mover tho

[nzer]

Originally Posted by supra2nv

seriously thank you, ive been thinking about this type of mod, just didn't know what it was called and ive been distracted with the rest of the build, it's overwhelming as it is

Here's a photo just taken by a mate for me of the underbody of his NZ 86.

They look just like those BRZ panels so looks like they will fit on your FRS 100%.

[nzer]

Originally Posted by supra2nv

thanks bro, yours as well. your car was inspiration homey u know that right?

edit: we might have been thinking of it in parallel tho is my guess, because I was thinking about it before I saw your car lol!

edit 2: you were first mover tho

Pity you didn't do dark grey then with yours LHD and mine RHD we could have been mirror images!

[Gixxersixxerman]

I am speechless.. a 50k FRS... I'd love to meet up at a local meet in SoCal and talk about your build... Maybe 86fest?? The vegas86 club is always going to the meets down in SoCal.. So maybe one day

[Gixxersixxerman]

Originally Posted by supra2nv

it's more than that actually ugh...I'm at about $63k now (carbon shaft, beatrush lightweight pulley set in gold, braille battery...other bits), and I have parts on order, so probably land at $67k (including mapping the ecu with Crawford) when all said and done.

Please step away from the credit card, or debit card... And from the online stores lol

[nzer]

@supra2nv don't forget http://global.rakuten.com/en/search?st=&tl=0&k=TRD+ for TRD stuff too. Genuine JDM and another option if Japanparts doesn't have hat you want. And of course Nigel JDM-Parts on this site too.

EDIT: here's a better search http://global.rakuten.com/en/search?...&tl=0&k=TRD+86

Have you considered these - look quite good on a white car but a bit OTT to me
http://global.rakuten.com/en/store/w...m/ms345-18001/

[R2RO]

Originally Posted by supra2nv

Bbk 6 pot front

My jaw just dropped man, amazing time and money put into this build. Can't wait to see it in person, Im going for the same BBK but with original Brembo stamps and in white

[nzer]

@supra2nv you NEED these too
http://global.rakuten.com/en/store/w...m/ms300-18001/

And
http://global.rakuten.com/en/store/w...m/ms324-18001/

And
http://global.rakuten.com/en/store/w...m/ms270-18001/

Have you considered these - look quite good on a white car but a bit OTT to me
http://global.rakuten.com/en/store/w...m/ms345-18001/

[nzer]

Originally Posted by supra2nv

LOL, I should have known! Awesome. We're peas in a pod... Are you my long lost twin.

And, Have you considered these - look quite good on a white car but a bit OTT to me
http://global.rakuten.com/en/store/w...m/ms345-18001/