iJDMTOY LEDs - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

JDM FRS · 06-26-2013, 08:18 PM

I just got my iJDMTOY LEDs in today, but my car is at the dealer getting the crickets fixed (hopefullly) Here is the breakdown of what I bought.

-Super Bright 68-SMD 9005 LED DLR/HB Bulbs

-iJDMTOY Exact Fit 7.5W High Power LED DRL Fog light Bezel

-Xenon White High Power 24-SMD-1210 LED License Plate

-15W LED Super Bright 4500K OEM Xenon White 15W H11 Low Beam Bulbs

-iJDMTOY Bi-Color 27-SMD-5050 3157 Switchback LED Bulbs For Turn Signal Lights

I'm thinking about making a DIY Video for the Fog Light Bezel since all I can find are DIY Pictures. Does anyone know of a video guide for them? I'll be sure to post some pictures once I put everything on...

ortizwyld · 06-26-2013, 10:33 PM

How was the fit of the new DRLs? My previous ones were a pain to get into the headlight. Almost felt like i may break it if I wasn't careful

JDM FRS · 06-26-2013, 10:53 PM

Oh yea? I haven't been able to fit test them yet. The dealer had to keep my car overnight to wait for the new Fuel Pump to come in. Have any tips on the install?

ortizwyld · 06-26-2013, 10:58 PM

Mine were not from this company, but they look very similar. As far as a fit goes it's just a matter of being as gentle as possible and wiggle it into the light fixture. For my next lights I want to get some fine sand paper and give it the smallest of sanding just to smooth out the DRL light opening.

ortizwyld · 06-26-2013, 10:59 PM

And by DRLs I mean strictly the bulb. I did not get the bar DRL. Wanted to clarify

JDM FRS · 06-26-2013, 11:57 PM

Quote:

Originally Posted by ortizwyld

And by DRLs I mean strictly the bulb. I did not get the bar DRL. Wanted to clarify

Oh okay, ill keep the sandpaper on standby in case I need it lol. yea I figured you meant the bulb lol =p Thanks!

JDM FRS · 06-28-2013, 01:21 AM

I got everything installed except for the Switchbacks, neither of them worked so i think they were defective. Here is a picture of the LED Headlights, Fog Light DRL's

MATTrocity · 06-28-2013, 01:47 AM

it looks.. godly

JDM FRS · 06-28-2013, 02:19 AM

Quote:

Originally Posted by MATTrocity

it looks.. godly

Thank you!

kALMIGHTY · 06-28-2013, 03:01 AM

Quote:

Originally Posted by dttaz

I just got my iJDMTOY LEDs in today, but my car is at the dealer getting the crickets fixed (hopefullly) Here is the breakdown of what I bought.

-Super Bright 68-SMD 9005 LED DLR/HB Bulbs

-iJDMTOY Exact Fit 7.5W High Power LED DRL Fog light Bezel

-Xenon White High Power 24-SMD-1210 LED License Plate

-15W LED Super Bright 4500K OEM Xenon White 15W H11 Low Beam Bulbs

-iJDMTOY Bi-Color 27-SMD-5050 3157 Switchback LED Bulbs For Turn Signal Lights

How much did all of this cost you?

JDM FRS · 06-28-2013, 03:21 AM

Quote:

Originally Posted by kALMIGHTY

How much did all of this cost you?

About 500 $

TakeNoL · 06-28-2013, 03:37 AM

Excuse my stupidity but what was the "Super Bright 68-SMD 9005 LED DLR/HB Bulbs" for?

Are you running DRL from both the headlight and the fog bezel and How easy/hard was the installation for the fog light bezel?

JDM FRS · 06-28-2013, 03:41 AM

Quote:

Originally Posted by TakeNoL

Excuse my stupidity but what was the "Super Bright 68-SMD 9005 LED DLR/HB Bulbs" for?

Are you running DRL from both the headlight and the fog bezel and How easy/hard was the installation for the fog light bezel?

You are correct. I have both the in headlight DRL led and the bezel going as my DRLs

The install wasn't too bad. I made a DIY video ill post it tomorrow.

TakeNoL · 06-28-2013, 03:56 AM

Did you have to buy "Super Bright 68-SMD 9005 LED DLR/HB Bulbs" in order for it to work?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FR-S / BRZ Turn Signal LEDs! No Resistors! Switchbacks! Plug & Play Install!	Diode Dynamics	Interior Parts (Incl. Lighting)	158	08-08-2018 07:52 PM
iJDMtoy LED Lights	RMStringer	Cosmetic Modification (Interior/Exterior/Lighting)	4	03-14-2013 08:56 PM
LEDs!!	ft86me	Cosmetic Modification (Interior/Exterior/Lighting)	3	02-13-2013 08:50 AM
I order DRL form iJDMTOY.com however!!!	Yosty	Cosmetic Modification (Interior/Exterior/Lighting)	15	02-04-2013 03:27 PM
Leds	_F-R-S_	Mid-Atlantic	4	10-25-2012 10:31 PM

06-26-2013, 10:33 PM	#2
ortizwyld Member Join Date: Feb 2013 Drives: 2013 10 Series Location: Bryan, Tx Posts: 50 Thanks: 7 Thanked 9 Times in 6 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	How was the fit of the new DRLs? My previous ones were a pain to get into the headlight. Almost felt like i may break it if I wasn't careful

06-26-2013, 10:58 PM	#4
ortizwyld Member Join Date: Feb 2013 Drives: 2013 10 Series Location: Bryan, Tx Posts: 50 Thanks: 7 Thanked 9 Times in 6 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Mine were not from this company, but they look very similar. As far as a fit goes it's just a matter of being as gentle as possible and wiggle it into the light fixture. For my next lights I want to get some fine sand paper and give it the smallest of sanding just to smooth out the DRL light opening.

06-26-2013, 10:59 PM	#5
ortizwyld Member Join Date: Feb 2013 Drives: 2013 10 Series Location: Bryan, Tx Posts: 50 Thanks: 7 Thanked 9 Times in 6 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	And by DRLs I mean strictly the bulb. I did not get the bar DRL. Wanted to clarify

06-28-2013, 03:37 AM	#12
TakeNoL Member Join Date: Sep 2012 Drives: Scion FR-S Location: New York Posts: 16 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Excuse my stupidity but what was the "Super Bright 68-SMD 9005 LED DLR/HB Bulbs" for? Are you running DRL from both the headlight and the fog bezel and How easy/hard was the installation for the fog light bezel?

06-28-2013, 03:56 AM	#14
TakeNoL Member Join Date: Sep 2012 Drives: Scion FR-S Location: New York Posts: 16 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Did you have to buy "Super Bright 68-SMD 9005 LED DLR/HB Bulbs" in order for it to work?

User Name		Remember Me?
Password