iJDMTOY LEDs
 

I just got my iJDMTOY LEDs in today, but my car is at the dealer getting the crickets fixed (hopefullly) Here is the breakdown of what I bought.

-Super Bright 68-SMD 9005 LED DLR/HB Bulbs

-iJDMTOY Exact Fit 7.5W High Power LED DRL Fog light Bezel

-Xenon White High Power 24-SMD-1210 LED License Plate

-15W LED Super Bright 4500K OEM Xenon White 15W H11 Low Beam Bulbs

-iJDMTOY Bi-Color 27-SMD-5050 3157 Switchback LED Bulbs For Turn Signal Lights


I'm thinking about making a DIY Video for the Fog Light Bezel since all I can find are DIY Pictures. Does anyone know of a video guide for them? I'll be sure to post some pictures once I put everything on...


http://i17.photobucket.com/albums/b7...3/IMAG1067.jpg

How was the fit of the new DRLs? My previous ones were a pain to get into the headlight. Almost felt like i may break it if I wasn't careful

Oh yea? I haven't been able to fit test them yet. The dealer had to keep my car overnight to wait for the new Fuel Pump to come in. Have any tips on the install?

Mine were not from this company, but they look very similar. As far as a fit goes it's just a matter of being as gentle as possible and wiggle it into the light fixture. For my next lights I want to get some fine sand paper and give it the smallest of sanding just to smooth out the DRL light opening.

And by DRLs I mean strictly the bulb. I did not get the bar DRL. Wanted to clarify :)

Oh okay, ill keep the sandpaper on standby in case I need it lol. yea I figured you meant the bulb lol =p Thanks!

I got everything installed except for the Switchbacks, neither of them worked so i think they were defective. Here is a picture of the LED Headlights, Fog Light DRL's

http://i17.photobucket.com/albums/b7...3/IMAG1071.jpg

http://i17.photobucket.com/albums/b7...3/IMAG1070.jpg

http://i17.photobucket.com/albums/b7...3/IMAG1068.jpg

it looks.. godly

Thank you!

How much did all of this cost you?

About 500 $

Excuse my stupidity but what was the "Super Bright 68-SMD 9005 LED DLR/HB Bulbs" for?

Are you running DRL from both the headlight and the fog bezel and How easy/hard was the installation for the fog light bezel?

You are correct. I have both the in headlight DRL led and the bezel going as my DRLs

The install wasn't too bad. I made a DIY video ill post it tomorrow.

Did you have to buy "Super Bright 68-SMD 9005 LED DLR/HB Bulbs" in order for it to work?