Good shop to do Coilover install - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Fallen43 · 12-16-2013, 11:07 PM

Lookimg for a good shop in the GTA/ Mississauga to do my Coilover install , and that will set them up correctly and that I won't have any issues later .

Thanks

Richard

kALMIGHTY · 12-16-2013, 11:08 PM

Might Car Mods.

l8apexr · 12-17-2013, 08:33 PM

have you tried Cyrious Garageworks? Scion Canada's drift FR-S driver?

DR 86 · 12-21-2013, 06:14 PM

Just do it yourself and get a proper alignment and corner balance after. The setting up will be done with a proper corner balance. Literally took an hour to do all four on jack stands.

rb123 · 12-22-2013, 09:26 PM

teknotik!

CreinCrein · 12-23-2013, 07:59 PM

i-garage in markham. very reasonable price and they get it done on the same day you bring it in.

fenixv8 · 12-24-2013, 10:42 AM

Speedstar if you want it done right

7thgear · 12-24-2013, 11:04 AM

CanJam
CanAlignment
Teknotik

installing is easy, corner balance/alignment is what takes time.

but make sure you know what you want the car to do... and understand the limits/pros/cons of your choice of coilovers.

krayzie · 12-24-2013, 07:07 PM

Corner balance and alignment is actually not the hardest part. The real hard part is to first get the ride height and the various adjustments to the shock cartridge right for your intended application.

For this car the best starting point for ride height is 15mm lower than stock, and go from there.

Unless you bought them to slam the car for show then just disregard what I said above.

BTW Ivan @ iGarage seems to get recommended everywhere. They did my STI pink springs and the job was great (no clunking on turns or anything). I'm waiting for Toyota to release the 86 By Tada Handling Pack so I can get those Sachs shocks to go with my springs, will probably go back to this shop.

df.dima · 12-25-2013, 01:11 PM

Scott @ CanAlignment is great, but you need to know what you want, not a bad idea to specify alignment specs.

wparsons · 12-31-2013, 08:38 PM

Scott is also a wealth of knowledge for settings if you can give him some background on what you want out of the alignment and some general settings that have worked for others.

Your best bet is to go see him with feedback on how the car handles with the factory alignment (push/oversteer, tire wear, etc).

DR 86 · 01-01-2014, 03:24 PM

Thumbs up for Scott too. Had my car corner balanced and aligned there after installing coil overs myself.

vignesh · 06-04-2014, 07:52 PM

Quote:

Originally Posted by DR 86

Thumbs up for Scott too. Had my car corner balanced and aligned there after installing coil overs myself.

Does Scott have Experience working on the frs/brz platform. I am looking at getting my tarmac II installed. I am also wondering if i should get the car aligned right away or wait for the coil overs to settle and then get it aligned. And is it worth corner balancing the car as well?

KPDoubleX · 06-04-2014, 08:09 PM

Automatrix.....dont trust anyone else with my cars!!! They can do the install and the alignment in one stop!! Really cheap and they have worked with a lot of FRS/BRZ's before. Ask for Ed or Alic and tell them Rachel sent you. Shop is at Keele and Lawerence right off the 401.

12-17-2013, 08:33 PM	#3
l8apexr Senior Member Join Date: Apr 2012 Drives: hybrid + racecar + FR-S Location: Woodbridge, ON Posts: 282 Thanks: 42 Thanked 64 Times in 43 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	have you tried Cyrious Garageworks? Scion Canada's drift FR-S driver? __________________ Team Lexus IS300 race car '14 Lexus RX450h Sport Design daily driver '14 FR-S fri/sat/sun car: SARD LSR wing, Downforce front lip, Mann Engineering dampers, TRDsways, Milltek xhaust, AEM Intake, RAYS 57xtreme, OnPoint Dyno ECUTek tuned: +30rwhp!

12-21-2013, 06:14 PM	#4
DR 86 Senior Member Join Date: Oct 2012 Drives: 2013 FR-S Location: Toronto Posts: 292 Thanks: 17 Thanked 76 Times in 60 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Just do it yourself and get a proper alignment and corner balance after. The setting up will be done with a proper corner balance. Literally took an hour to do all four on jack stands. __________________ Perrin CAI\|Perrin MCB\|P&L header\|Motiv OP/FP\|MXP catback\|Tein Type Flex coilovers\|Eibach F/R sway bars\|GS front strut brace\|Street:PM HC+800/Track:Carbotech XP10\|StopTech slotted rotors/SS lines\|SBC RPF1s\|Street:FK453/Winter:Pirelli SottoZero3/Track:Toyo R888s\|Leg Sport rear spoiler\|EcuTek Tuned\|OEM oil cooler\|4th/F1 brake lights

12-24-2013, 10:42 AM	#7
fenixv8 Senior Member Join Date: Nov 2012 Drives: 1991 Acura NSX, 2013 Scion FRS Location: Toronto Posts: 121 Thanks: 22 Thanked 34 Times in 18 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Speedstar if you want it done right __________________ 1991 BB NSX . 2013 WO FRS . 1978 Yamaha SR500

12-24-2013, 11:04 AM	#8
7thgear i'm sorry, what? Join Date: Jan 2012 Drives: Canada Location: I rock a beat harder than you can beat it with rocks Posts: 4,399 Thanks: 357 Thanked 2,508 Times in 1,268 Posts Mentioned: 40 Post(s) Tagged: 3 Thread(s)	CanJam CanAlignment Teknotik installing is easy, corner balance/alignment is what takes time. but make sure you know what you want the car to do... and understand the limits/pros/cons of your choice of coilovers. __________________ don't you think if I was wrong, I'd know it?

12-24-2013, 07:07 PM	#9
krayzie Drive From Home Join Date: Dec 2013 Drives: BRZ STI Performance Location: Filth City Posts: 4,912 Thanks: 2,368 Thanked 3,111 Times in 2,007 Posts Mentioned: 30 Post(s) Tagged: 1 Thread(s)	Corner balance and alignment is actually not the hardest part. The real hard part is to first get the ride height and the various adjustments to the shock cartridge right for your intended application. For this car the best starting point for ride height is 15mm lower than stock, and go from there. Unless you bought them to slam the car for show then just disregard what I said above. BTW Ivan @ iGarage seems to get recommended everywhere. They did my STI pink springs and the job was great (no clunking on turns or anything). I'm waiting for Toyota to release the 86 By Tada Handling Pack so I can get those Sachs shocks to go with my springs, will probably go back to this shop. Last edited by krayzie; 12-24-2013 at 07:20 PM.

12-16-2013, 11:08 PM	#2
kALMIGHTY Banned Join Date: Nov 2012 Drives: TRD Ultramarine '13 Location: Calgary Posts: 1,377 Thanks: 190 Thanked 766 Times in 347 Posts Mentioned: 24 Post(s) Tagged: 0 Thread(s)	Might Car Mods.

12-22-2013, 09:26 PM	#5
rb123 Senior Member Join Date: Jun 2012 Drives: 2013 Scion FR-S Firestorm MT Location: Markham Posts: 214 Thanks: 0 Thanked 29 Times in 16 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	teknotik!

12-23-2013, 07:59 PM	#6
CreinCrein Senior Member Join Date: Aug 2013 Drives: FR-S Location: Toronto Posts: 180 Thanks: 11 Thanked 11 Times in 10 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	i-garage in markham. very reasonable price and they get it done on the same day you bring it in.

12-25-2013, 01:11 PM	#10
df.dima Senior Member Join Date: May 2012 Drives: FR-S and Mazda 3 Sky Location: Kitchener, ON Posts: 343 Thanks: 10 Thanked 132 Times in 93 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Scott @ CanAlignment is great, but you need to know what you want, not a bad idea to specify alignment specs.

01-01-2014, 03:24 PM	#12
DR 86 Senior Member Join Date: Oct 2012 Drives: 2013 FR-S Location: Toronto Posts: 292 Thanks: 17 Thanked 76 Times in 60 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Thumbs up for Scott too. Had my car corner balanced and aligned there after installing coil overs myself. __________________ Perrin CAI\|Perrin MCB\|P&L header\|Motiv OP/FP\|MXP catback\|Tein Type Flex coilovers\|Eibach F/R sway bars\|GS front strut brace\|Street:PM HC+800/Track:Carbotech XP10\|StopTech slotted rotors/SS lines\|SBC RPF1s\|Street:FK453/Winter:Pirelli SottoZero3/Track:Toyo R888s\|Leg Sport rear spoiler\|EcuTek Tuned\|OEM oil cooler\|4th/F1 brake lights

06-04-2014, 08:09 PM	#14
KPDoubleX ❤ fr-s love ❤ Join Date: Jan 2013 Drives: 13 Asphalt Scion FRS Location: Mississauga Posts: 208 Thanks: 45 Thanked 75 Times in 51 Posts Mentioned: 3 Post(s) Tagged: 2 Thread(s)	Automatrix.....dont trust anyone else with my cars!!! They can do the install and the alignment in one stop!! Really cheap and they have worked with a lot of FRS/BRZ's before. Ask for Ed or Alic and tell them Rachel sent you. Shop is at Keele and Lawerence right off the 401. __________________ Asphalt Scion FR-S Enkei \| Aero Jacket \| BC Racing \| Invida \| AFE \| JL Audio \| Seibon \| Chargespeed \| Cusco \| Mishimoto \| Spec D \| www.themodmarket.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
anyone know a good audio install shop	NYCsubaruBRZ	NY / NJ / CT / PA	6	01-16-2014 11:22 AM
Coilover and Springs Install at Performance Shop	F-T	Mechanical Maintenance and Tools	22	12-12-2013 02:12 PM
HELP kw coilover top hat install problem	autoCAR	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	10	10-18-2013 11:55 PM
HKS Coilover install	gtauto	AUSTRALIA	16	04-21-2013 08:37 AM
Good coilover brand for DD	ngabdala	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	8	09-26-2012 04:59 AM

User Name		Remember Me?
Password