The Grapes of Rasp - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

JBezugs · 10-15-2022, 03:26 PM

Ended up throwing the OEM catback back on, much better. Still has a surprising amount of volume outside the car, but no more drone in the car! Great success!

Thefalls · 10-22-2022, 03:57 PM

Indeed stock everything after the header is "droneless".

I went with a resonated/catted (cat is from an STI,supposed to high flow) Front pipe and JDM quad exhaust.
Note that i wrapped the front pipe as i didn't like the heat radiating from it into the cabin during the summer days.

And changed all hangers (5 of them).

It was all done in increments.LOL.

First was header (EL and wrapped) then front pipe followed by wrapping FP then quad exhaust and finally hangers.

In this way i was able to experience the changes and was genuinely surprised by the effect of the hangers.

There was some drone after i added the TRD quad exhaust, around the 2-2.5k rpm when cruising and then I fitted the hangers.
And the drone disappeared, almost.

The reverberations from the exhaust into the cabin also disappeared. (read as less boomy)

And no it was not a psychological change.

JD001 · 10-22-2022, 04:40 PM

Quote:

Originally Posted by JBezugs

Ended up throwing the OEM catback back on, much better. Still has a surprising amount of volume outside the car, but no more drone in the car! Great success!

I kept everything standard OEM from the mid-pipe to the back.. Fruity when pushed otherwise it's pretty quiet.

RToyo86 · 10-23-2022, 01:13 PM

JDL header thread is hovering around this one but figured I'd link to my post for anyone curious. I have little to no rasp with this setup. And essentially zero drone. Slightly boomy on startup but otherwise very tame.

I ran a punched out OEM header with this same setup and noticed more drone to the point I couldn't drive with the windows down without headaches and ear pain.

https://www.ft86club.com/forums/show...&postcount=445

10-15-2022, 03:26 PM	#15
JBezugs Good Job Subaru! Join Date: Mar 2016 Drives: '18 440i GC, '24 CX-50 Meridian Location: Toronto, Ontario, Canada Posts: 355 Thanks: 146 Thanked 336 Times in 157 Posts Mentioned: 4 Post(s)	Ended up throwing the OEM catback back on, much better. Still has a surprising amount of volume outside the car, but no more drone in the car! Great success! __________________ My (no longer Green) 2017 BRZ Build Thread

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Will header cause rasp?	Tysoncrosby21	Engine, Exhaust, Transmission	8	02-12-2017 04:09 AM
headers rasp	mamamiaellis	Engine, Exhaust, Transmission	13	05-20-2015 10:20 PM
Rasp issue, need help on fix?	slyder	Engine, Exhaust, Transmission	9	01-23-2015 05:09 PM
Glasspack to get rid of rasp?	dem00n	Other Vehicles & General Automotive Discussions	3	10-18-2014 09:56 AM
Rasp help???	Gshoxx	Engine, Exhaust, Transmission	3	05-01-2014 01:20 AM

10-22-2022, 03:57 PM	#16
Thefalls Senior Member Join Date: Feb 2014 Drives: Corolla GT Location: Sunny place. Posts: 208 Thanks: 372 Thanked 118 Times in 90 Posts Mentioned: 6 Post(s)	Indeed stock everything after the header is "droneless". I went with a resonated/catted (cat is from an STI,supposed to high flow) Front pipe and JDM quad exhaust. Note that i wrapped the front pipe as i didn't like the heat radiating from it into the cabin during the summer days. And changed all hangers (5 of them). It was all done in increments.LOL. First was header (EL and wrapped) then front pipe followed by wrapping FP then quad exhaust and finally hangers. In this way i was able to experience the changes and was genuinely surprised by the effect of the hangers. There was some drone after i added the TRD quad exhaust, around the 2-2.5k rpm when cruising and then I fitted the hangers. And the drone disappeared, almost. The reverberations from the exhaust into the cabin also disappeared. (read as less boomy) And no it was not a psychological change.

10-23-2022, 01:13 PM	#18
RToyo86 Senior Member Join Date: Mar 2018 Drives: 17 Asphalt 86 Location: Ottawa Posts: 2,421 Thanks: 1,907 Thanked 2,676 Times in 1,307 Posts Mentioned: 16 Post(s)	JDL header thread is hovering around this one but figured I'd link to my post for anyone curious. I have little to no rasp with this setup. And essentially zero drone. Slightly boomy on startup but otherwise very tame. I ran a punched out OEM header with this same setup and noticed more drone to the point I couldn't drive with the windows down without headaches and ear pain. https://www.ft86club.com/forums/show...&postcount=445

User Name		Remember Me?
Password