18x10.5 +50 (rear) Will it fit? - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Raven86Project · 01-18-2018, 10:17 PM

Hi! I want to maximize the width of my rear wheels (mainly for cosmetics) on the stock body and at the same time keeping the current stance (no poke or extra camber).

Currently the wheels are 18x9.5 +38 with 255/35. I took some measurements and there is a 28mm clearance between the rim and the strut. So, if I get them widened by 1" (25mm) there should still be 3mm of clearance (minimum recommended) resulting in 18x10.5 +50.

I want to keep this wheel model, which I love, and the closest spec from Work is 18x10.5+30 (20mm poke).

Is there anything else that I have to keep into account before proceeding?
Thank you all!

TommyW · 01-18-2018, 10:21 PM

Wow beautiful car.

Raven86Project · 01-18-2018, 10:22 PM

Thank you bud!

Leonardo · 01-18-2018, 10:28 PM

This thread has 19x10.5 +32 rear wheels with 235 /30 tires at -2.8 camber. 19 is bigger, but the poke camber will look the same as 18s.

a little pull on the rears goes along way. there is s guy with 275/40/17 rears.
post 110
http://www.ft86club.com/forums/showt...t=64040&page=8

19x10.5
http://www.ft86club.com/forums/showthread.php?t=23831

Raven86Project · 01-18-2018, 10:42 PM

Thank you Leonardo! I mainly want to know if I'm going to have fitment problems with my proposed setup 18x10.5 +50, especially with inner clearance.

Leonardo · 01-18-2018, 11:14 PM

Quote:

Originally Posted by JDM_inspired

Thank you Leonardo! I mainly want to know if I'm going to have fitment problems with my proposed setup 18x10.5 +50, especially with inner clearance.

I assume you have coilovers.

This guy has stock struts, springs, and lca and his 19x10+50 fits. Coilovers would give you enough room for 18x10.5 +50
http://www.ft86club.com/forums/showt...t=61628&page=2

You are welcome!

Raven86Project · 01-18-2018, 11:18 PM

Thank you for the link! Seems like this is going to work just fine!

01-18-2018, 10:17 PM	#1
Raven86Project JDM Spirit of the '90s Join Date: Dec 2016 Drives: 2015 FR-S Turbo Location: South Florida Posts: 308 Thanks: 325 Thanked 482 Times in 210 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	18x10.5 +50 (rear) Will it fit? Hi! I want to maximize the width of my rear wheels (mainly for cosmetics) on the stock body and at the same time keeping the current stance (no poke or extra camber). Currently the wheels are 18x9.5 +38 with 255/35. I took some measurements and there is a 28mm clearance between the rim and the strut. So, if I get them widened by 1" (25mm) there should still be 3mm of clearance (minimum recommended) resulting in 18x10.5 +50. I want to keep this wheel model, which I love, and the closest spec from Work is 18x10.5+30 (20mm poke). Is there anything else that I have to keep into account before proceeding? Thank you all! __________________ IG: raven86project Build Thread HERE Last edited by Raven86Project; 01-18-2018 at 11:06 PM.

01-18-2018, 10:22 PM	#3
Raven86Project JDM Spirit of the '90s Join Date: Dec 2016 Drives: 2015 FR-S Turbo Location: South Florida Posts: 308 Thanks: 325 Thanked 482 Times in 210 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Thank you bud! __________________ IG: raven86project Build Thread HERE

01-18-2018, 10:28 PM	#4
Leonardo Country Boy 4 Life Join Date: Jul 2012 Drives: 19' & 06' Ridgelines, 13' FR-S Location: EUGENE Posts: 5,228 Thanks: 6,719 Thanked 5,293 Times in 2,720 Posts Mentioned: 47 Post(s) Tagged: 1 Thread(s)	This thread has 19x10.5 +32 rear wheels with 235 /30 tires at -2.8 camber. 19 is bigger, but the poke camber will look the same as 18s. a little pull on the rears goes along way. there is s guy with 275/40/17 rears. post 110 http://www.ft86club.com/forums/showt...t=64040&page=8 19x10.5 http://www.ft86club.com/forums/showthread.php?t=23831 __________________ I LIKE TIRES!

01-18-2018, 10:42 PM	#5
Raven86Project JDM Spirit of the '90s Join Date: Dec 2016 Drives: 2015 FR-S Turbo Location: South Florida Posts: 308 Thanks: 325 Thanked 482 Times in 210 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Thank you Leonardo! I mainly want to know if I'm going to have fitment problems with my proposed setup 18x10.5 +50, especially with inner clearance. __________________ IG: raven86project Build Thread HERE

01-18-2018, 11:18 PM	#7
Raven86Project JDM Spirit of the '90s Join Date: Dec 2016 Drives: 2015 FR-S Turbo Location: South Florida Posts: 308 Thanks: 325 Thanked 482 Times in 210 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Thank you for the link! Seems like this is going to work just fine! __________________ IG: raven86project Build Thread HERE

01-18-2018, 10:21 PM	#2
TommyW Senior Member Join Date: Feb 2017 Drives: '13 Whiteout Location: San Clemente Posts: 1,493 Thanks: 496 Thanked 1,245 Times in 674 Posts Mentioned: 10 Post(s) Tagged: 0 Thread(s)	Wow beautiful car.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help about to pull the trigger....	JerryMichaels7	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	12	02-25-2014 07:12 PM
How many of us are waiting to pull the trigger?	Phantobe	Scion FR-S / Toyota 86 GT86 General Forum	13	08-26-2013 05:54 PM
About to pull the trigger on Perrin....	FRSFirestorm	Engine, Exhaust, Transmission	143	05-04-2013 02:25 AM
To pull the trigger or to wait?	that_one_guy	Scion FR-S / Toyota 86 GT86 General Forum	17	10-24-2012 05:17 PM
2007 STi... should I pull the trigger?	RRnold	Other Vehicles & General Automotive Discussions	25	02-23-2010 10:37 PM

User Name		Remember Me?
Password