Will this fit? (width, offset and tire size Qs)

[15limited]

Originally Posted by dsc_pat

Not the place to discuss this. Do you have info about the fitment ? If you don't, please do just pass.

Thanks !

No I haven't personally seen anyone run it, I've never heard of anyone running it, 255 is more of a 9/9.5 inch wheel thing

[BlaineWasHere]

Originally Posted by dsc_pat

Not the place to discuss this. Do you have info about the fitment ? If you don't, please do just pass.



Thanks !

Should be fine if you don't have a lot of negative camber.


Sent from my iPhone using Tapatalk

[continuecrushing]

Originally Posted by dsc_pat

Not the place to discuss this. Do you have info about the fitment ? If you don't, please do just pass.

Thanks !

interesting...but 255 really shouldn't be on an 8"

Either way, the tire will more than likely rub on the inside strut/spring since you're running double crash bolts. What camber settings are you at right now?

Take a look at this: thanks to @track_warrior
This a 245/40, but you want 255 + camber bolts. It would be close
Also depends which 255 tire you run, some run wider than others.

[azynneo]

will a 265/40 fit a square setup of 18x9.5 without rubbing issues dropped an inch on coils

[dsc_pat]

Ended up buying +35 as camber is a priority. Thanks for the input !

I'll post some pics when everything is all done, as the snow keeps falling up here.

[swarb]

Originally Posted by azynneo

will a 265/40 fit a square setup of 18x9.5 without rubbing issues dropped an inch on coils

Offset Matters.
That tire size is too tall.
It will rub the rear bumper tab on bigger bumps at the very least.

[azynneo]

Originally Posted by swarb

Offset Matters.
That tire size is too tall.
It will rub the rear bumper tab on bigger bumps at the very least.

40 offset sir, and yeah I thought it'd be too tall =/

[hatt3r94]

18x8.5 +45 225x40 up front
18x9.5 +45 255x35 in back
putting 1" suspension drop in front and back.
Thanks for the help!

[15limited]

Originally Posted by dsc_pat

Ended up buying +35 as camber is a priority. Thanks for the input !

I'll post some pics when everything is all done, as the snow keeps falling up here.

But what about the 9"+ tire on an 8" wheel...

[dsc_pat]

You guys (except a few of you of course) are forum tuners. Plenty of people are running 255 tires on 8 inch rims at the track, and its been like that for years. Get out there. Stretching is bad, be e-thugs about that. Let people that have been involved with the track do their things and keep regurgitating what is normal and what is not somewhere else.

Thanks !

[lizbrayan]

Ok i have 19x9.5 up front and 19x10.5 in rear +30 offset they are 5x114 so im going to need adapters and I have 245/45/19 tires would they fit and im getting airbag suspension too?

[DeMiZe]

Need help! Have my Rocket Bunny GT 86, and i bought Forgestar F14 Super Deep
Parametrs - (2) Front: 19x10 +20 SUPER DEEP CONCAVE PROFILE
(2) Rear: 19x10 +20 SUPER DEEP CONCAVE PROFILE
Bolt Pattern: 5x120

But what i have... https://pp.vk.me/c837526/v837526067/...oJAo9WAW6k.jpg
https://pp.vk.me/c837526/v837526067/...JReokEE1cg.jpg
https://pp.vk.me/c837526/v837526067/...2MVBuye9uk.jpg

Master said that i need to sell front, because it is not established...
Any ideas?

[swarb]

Originally Posted by lizbrayan

Ok i have 19x9.5 up front and 19x10.5 in rear +30 offset they are 5x114 so im going to need adapters and I have 245/45/19 tires would they fit and im getting airbag suspension too?

45 series tires are too tall. For 19's you need 30 series. Rears will probably rub bumper tabs, but anything low with air suspension will be a tight fit if you are trying to tuck tire/rim. Also depending on the airbags, there will be about 15mm less inside clearance than stock so those wheels won't work. Search for bags fitment(?) thread for more info.

[swarb]

Originally Posted by DeMiZe

Need help! Have my Rocket Bunny GT 86, and i bought Forgestar F14 Super Deep
Parametrs - (2) Front: 19x10 +20 SUPER DEEP CONCAVE PROFILE
(2) Rear: 19x10 +20 SUPER DEEP CONCAVE PROFILE
Bolt Pattern: 5x120

But what i have... https://pp.vk.me/c837526/v837526067/...oJAo9WAW6k.jpg
https://pp.vk.me/c837526/v837526067/...JReokEE1cg.jpg
https://pp.vk.me/c837526/v837526067/...2MVBuye9uk.jpg

Master said that i need to sell front, because it is not established...
Any ideas?

What suspension?
Adapters? Size?
Tires? Lots of camber?
Should be able to fit it as is, you can search for the wide body/rocket bunny wheel fitment thread for more specific info on other people's setups.