No grill front bumper - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

lizbrayan · 12-14-2016, 09:15 AM

Quote:

Originally Posted by stevemp5

For those who have already made this change, can you remove the grill without removing the bumper?

Just kick it really really hard

In all seriousness, you shouldnt have to, its just clips that go into the bumper should be easy.

zeal86 · 12-14-2016, 09:27 AM

Quote:

Originally Posted by stevemp5

For those who have already made this change, can you remove the grill without removing the bumper?

I didn't do it this way but I'm thinking you can if you lift the front end high enough to comfortably work and remove the under panels. I think that would allow enough room to get in there to remove the screws and pop out the snaps.

I dremeled the tabs down even on the bumper since I had no plans of reinstalling the grille. Looks a lot cleaner this way.

__________________________________________

projekt zeal86 build

zeal.eightsix Facebook

Instagram @zeal.eightsix

stevemp5 · 12-14-2016, 09:47 AM

Ok cool, thanks for the info guys. I will surely try when the car will come out of hibernation..

SkAsphalt · 12-14-2016, 03:23 PM

Quote:

Originally Posted by erikfallout

Not often but Id honestly be shocked if a bird managed to get in there.

In before rad damage

Leonardo · 12-14-2016, 03:30 PM

When you take the grill out, you will see that there are little clip "nubs" that sort of look like teeth. (I guess) Anyway, I was not going to be happy unless I sanded them off and repainted the bumper. So, I reinstalled the grill.

Here is a pic...

via Imgflip Meme Generator

zeal86 · 12-14-2016, 03:32 PM

Quote:

Originally Posted by Leonardo

When you take the grill out, you will see that there are little clip "nubs" that sort of look like teeth. (I guess) Anyway, I was not going to be happy unless I sanded them off and repainted the bumper. So, I reinstalled the grill.

Here is a pic...

via Imgflip Meme Generator

If dremeled off cleanly, painting the bumper will not be required.

I'm pretty anal about my build so trust me when I say it will look fine... lol

__________________________________________

projekt zeal86 build

zeal.eightsix Facebook

Instagram @zeal.eightsix

Trust86 · 12-14-2016, 03:36 PM

Keep the grill! Not worth the damage to radiator/condenser.
If you want more air for cooling, dremel out the top part and get a beatrush bar or drift armor bar.

Leonardo · 12-14-2016, 03:46 PM

Quote:

Originally Posted by zeal86

If dremeled off cleanly, painting the bumper will not be required.

I'm pretty anal about my build so trust me when I say it will look fine... lol

__________________________________________

projekt zeal86 build

zeal.eightsix Facebook

Instagram @zeal.eightsix

Nice polishing! So Clean! I have buffed lots of my parts too. Though mine are just stock parts...

zeal86 · 12-14-2016, 04:18 PM

Quote:

Originally Posted by Trust86

Keep the grill! Not worth the damage to radiator/condenser.
If you want more air for cooling, dremel out the top part and get a beatrush bar or drift armor bar.

Thanks... I also polish a lot of my stock parts. I've done most of everything that is seen through the grille opening. Cheap aesthetic modification.👌

OP... If your 86 is a daily, removing the grille may not be the way to go. However, if it is a daily and you don't drive a lot of highway miles or country back roads I say go for it.

Quote:

Originally Posted by Leonardo

Nice polishing! So Clean! I have buffed lots of my parts too. Though mine are just stock parts...

__________________________________________

projekt zeal86 build

zeal.eightsix Facebook

Instagram @zeal.eightsix

danny_d19 · 12-17-2016, 10:30 PM

I took the grill and styrofoam out, painted beam flat black. Instead of shaving off the grill tabs left over, I masked and painted them black so you can't even see them. That way the grill can go back on in the future.

PandaSPUR · 12-18-2016, 04:35 PM

Quote:

Originally Posted by danny_d19

I took the grill and styrofoam out, painted beam flat black. Instead of shaving off the grill tabs left over, I masked and painted them black so you can't even see them. That way the grill can go back on in the future.

Nice car, but please tell me you retrofitted the stock lights to give a proper cutoff for those HID bulbs...

SkAsphalt · 12-19-2016, 10:54 AM

Quote:

Originally Posted by PandaSPUR

Nice car, but please tell me you retrofitted the stock lights to give a proper cutoff for those HID bulbs...

This outrage is so 2014

GSpeed · 12-19-2016, 11:48 AM

Quote:

Originally Posted by SkAsphalt

This outrage is so 2014

What? No it's not. Cheap headlights that shine in the eyes of drivers coming the other way is always irritating.

PandaSPUR · 12-19-2016, 01:18 PM

Quote:

Originally Posted by GSpeed

What? No it's not. Cheap headlights that shine in the eyes of drivers coming the other way is always irritating.

Especially irritating when our cars are already low even at stock height. I've noticed that Acura SUVs with those LED headlights always shine rightt into my fucking eyes, and I don't think its the driver's fault.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NorCal-Scion FRS front bumper for sale(Toyota FT86 Modellista front bumper with lips)	unicorn86	Northern California	0	02-13-2016 05:10 PM
Any tips on how to clip the lower part grill back onto the bumper ?	awhatzable	Issues \| Warranty \| Recalls / TSB	2	03-29-2015 03:40 AM
front grill	PipeLovoo	Exterior Parts (Aero, Lighting, Etc.)	8	05-28-2014 11:11 AM
WTB: BRZ Front bumper moustache & grill	AlexTheGreek	Exterior Parts (Aero, Lighting, Etc.)	0	06-04-2013 08:35 AM
Front bumper grill.	\|-Goku-\|	Issues \| Warranty \| Recalls / TSB	20	09-04-2012 08:42 PM

12-14-2016, 09:47 AM	#17
stevemp5 Senior Member Join Date: Jan 2013 Drives: scion fr-s Location: montreal Posts: 217 Thanks: 89 Thanked 148 Times in 77 Posts Mentioned: 4 Post(s) Tagged: 1 Thread(s)	Ok cool, thanks for the info guys. I will surely try when the car will come out of hibernation..

12-14-2016, 03:30 PM	#19
Leonardo Country Boy 4 Life Join Date: Jul 2012 Drives: 19' & 06' Ridgelines, 13' FR-S Location: EUGENE Posts: 5,228 Thanks: 6,719 Thanked 5,293 Times in 2,720 Posts Mentioned: 47 Post(s) Tagged: 1 Thread(s)	When you take the grill out, you will see that there are little clip "nubs" that sort of look like teeth. (I guess) Anyway, I was not going to be happy unless I sanded them off and repainted the bumper. So, I reinstalled the grill. Here is a pic... via Imgflip Meme Generator

12-14-2016, 03:36 PM	#21
Trust86 Senior Member Join Date: Sep 2015 Drives: 2016 Halo FRS Location: US Posts: 414 Thanks: 290 Thanked 162 Times in 106 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	Keep the grill! Not worth the damage to radiator/condenser. If you want more air for cooling, dremel out the top part and get a beatrush bar or drift armor bar.

12-17-2016, 10:30 PM	#24
danny_d19 Member Join Date: Jun 2015 Drives: Whiteout RBv1 FRS Location: BC, Canada Posts: 62 Thanks: 59 Thanked 76 Times in 32 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	I took the grill and styrofoam out, painted beam flat black. Instead of shaving off the grill tabs left over, I masked and painted them black so you can't even see them. That way the grill can go back on in the future.

User Name		Remember Me?
Password