Inexpensive DIY Big Brake Kit - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

200hp/tonne · 12-19-2014, 09:15 PM

So i was inspired by Swift996's wrx brakes to research Wilwood brakes, and I realized i could build a similar kit at maybe a reduced price. As stated in the linked thread, I do not intend for it to be a track monster. I just want a comparatively inexpensive, featherweight setup that would work well on the street.

I began by taking measurements of the wheel carrier and the stock rotors, which gave me a template for brackets that would mount Wilwood calipers at the appropriate location for the 2 piece rotor.

Some CAD:

Some FEA:
Applying 20000N force where caliper mounts to bracket. This corresponds to approximately 1.6g of braking decceleration, assuming 70% weight transfer to the front axle and a coefficient of friction of 1 between the road and tires.

Stress profile looks good, Al 6061 has a yeild strength of roughly 275 MPa, so we have a factor of safety of above 3, which is also great...

200hp/tonne · 12-19-2014, 09:23 PM

Wilwood forged dynalite calipers :

200hp/tonne · 12-19-2014, 09:41 PM

Failed prototypes:

These had wrong hole placements. The caliper was in such a position that the brake pads ended up 1mm outside the outer edge of the rotor.

Lasercut prototypes in wood:

Perfect. Revised the design a little to go back to the original shape.
Final brackets would be cut on a waterjet.

200hp/tonne · 12-19-2014, 09:44 PM

Final Product:

I will install these on the FRS tomorrow, Should be an interesting day...

CSG Mike · 12-19-2014, 10:10 PM

I love projects like this!

200hp/tonne · 12-19-2014, 10:26 PM

Forgot to add prices:
Caliper : WIL-120-6811 $125 X2 = $250
Rotor Hats : WIL-170-9206 $125 X2 = $250
Rotor Discs : WIL-160-0277 $33 X2 = $66
Brake pads BP10 : WIL-150-8850K $42
Brake lines : WIL-220-9288 $60
Brackets : $100

TOTAL : $768

Joe-G · 12-19-2014, 11:58 PM

Quote:

Originally Posted by 200hp/tonne

Forgot to add prices:
Caliper : WIL-120-6811 $125 X2 = $250
Rotor Hats : WIL-170-9206 $125 X2 = $250
Rotor Discs : WIL-160-0277 $33 X2 = $66
Brake pads BP10 : WIL-150-8850K $42
Brake lines : WIL-220-9288 $60
Brackets : $100

TOTAL : $768

Cool project! Willing to share your design? I could probably get a bracket like yours cut up at work...

Unless you're in the business of selling the bracket/making kits?? Works for me too.

GotBRZ1691 · 12-20-2014, 12:26 AM

I have an ESAB plasma / water jet CNC cutter at work and have been thinking about this for awhile now.

This and license plate relocation kits.

Cool Project. If willing to share design I could get literally hundreds of these made next week. Because of the holidays we have a production shutdown and are only doing projects at work.

200hp/tonne · 12-20-2014, 12:45 AM

Here is a snapshot of my design. Just replace the 8mm holes by 10mm and the 10mm holes by 12mm and you shall have a perfect part.

I am not in the business of making these brackets, not by any means.
I had a shop near work make them for me, so i can get them made again for anyone who wants a pair.

200hp/tonne · 12-20-2014, 12:56 AM

Quote:

Originally Posted by GotBRZ1691

I have an ESAB plasma / water jet CNC cutter at work and have been thinking about this for awhile now.

This and license plate relocation kits.

Cool Project. If willing to share design I could get literally hundreds of these made next week. Because of the holidays we have a production shutdown and are only doing projects at work.

If you end up making money on these hundreds, could you send me a couple? The taper on the water jet cut screwed up the holes on one of my pieces (the guy stacked my 2 work pieces and made 1 cut), so my 10mm holes have to be 11mm on that one piece for everything to line up properly. I haven't done GD&T at all on this thing...

By the way, the piece is 3/4" thick.

Pooverdam · 12-20-2014, 02:41 AM

subbed.

Would be interested in some brackets.

Joe-G · 12-20-2014, 03:32 AM

Quote:

Originally Posted by 200hp/tonne

Here is a snapshot of my design. Just replace the 8mm holes by 10mm and the 10mm holes by 12mm and you shall have a perfect part.

I am not in the business of making these brackets, not by any means.
I had a shop near work make them for me, so i can get them made again for anyone who wants a pair.

Cool! I've always been meaning to get into the garage and start taking measurements, but these base measurements are SO helpful if one even wanted to make brackets for other calipers.

Should be pretty quick and easy to convert and fire off a DXF to the shop. I just wish it wasnt winter around here, otherwise I'd be so much more productive with the car lol...

Thanks again!

DAEMANO · 12-20-2014, 03:43 AM

Subbed and definitely in for a couple pair of brackets.

Panman · 12-20-2014, 07:20 AM

Stopping performance vs Std Brakes?

12-19-2014, 09:15 PM	#1
200hp/tonne Senior Member Join Date: Apr 2013 Drives: Raven Fr-S Location: Santa Clara, CA Posts: 136 Thanks: 100 Thanked 84 Times in 37 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Inexpensive DIY Big Brake Kit So i was inspired by Swift996's wrx brakes to research Wilwood brakes, and I realized i could build a similar kit at maybe a reduced price. As stated in the linked thread, I do not intend for it to be a track monster. I just want a comparatively inexpensive, featherweight setup that would work well on the street. I began by taking measurements of the wheel carrier and the stock rotors, which gave me a template for brackets that would mount Wilwood calipers at the appropriate location for the 2 piece rotor. Some CAD: Some FEA: Applying 20000N force where caliper mounts to bracket. This corresponds to approximately 1.6g of braking decceleration, assuming 70% weight transfer to the front axle and a coefficient of friction of 1 between the road and tires. Stress profile looks good, Al 6061 has a yeild strength of roughly 275 MPa, so we have a factor of safety of above 3, which is also great... __________________ FR-S Mod target: 200 BHp / Tonne 4lb Li Battery, RPF1 17x9, 245 RE71R, RCE T2, OFH, OFT Stg 2, Berk Over+Front Pipe, , STI Eng/Trans Mts, PU Bushings, Forrester Liq-Liq oil cooler, Al Driveshaft, OSGiken Diff Last edited by 200hp/tonne; 12-19-2014 at 10:57 PM.

12-19-2014, 09:23 PM	#2
200hp/tonne Senior Member Join Date: Apr 2013 Drives: Raven Fr-S Location: Santa Clara, CA Posts: 136 Thanks: 100 Thanked 84 Times in 37 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Wilwood forged dynalite calipers : __________________ FR-S Mod target: 200 BHp / Tonne 4lb Li Battery, RPF1 17x9, 245 RE71R, RCE T2, OFH, OFT Stg 2, Berk Over+Front Pipe, , STI Eng/Trans Mts, PU Bushings, Forrester Liq-Liq oil cooler, Al Driveshaft, OSGiken Diff

12-19-2014, 09:41 PM	#3
200hp/tonne Senior Member Join Date: Apr 2013 Drives: Raven Fr-S Location: Santa Clara, CA Posts: 136 Thanks: 100 Thanked 84 Times in 37 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Failed prototypes: These had wrong hole placements. The caliper was in such a position that the brake pads ended up 1mm outside the outer edge of the rotor. Lasercut prototypes in wood: Perfect. Revised the design a little to go back to the original shape. Final brackets would be cut on a waterjet. __________________ FR-S Mod target: 200 BHp / Tonne 4lb Li Battery, RPF1 17x9, 245 RE71R, RCE T2, OFH, OFT Stg 2, Berk Over+Front Pipe, , STI Eng/Trans Mts, PU Bushings, Forrester Liq-Liq oil cooler, Al Driveshaft, OSGiken Diff

12-19-2014, 09:44 PM	#4
200hp/tonne Senior Member Join Date: Apr 2013 Drives: Raven Fr-S Location: Santa Clara, CA Posts: 136 Thanks: 100 Thanked 84 Times in 37 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Final Product: I will install these on the FRS tomorrow, Should be an interesting day... __________________ FR-S Mod target: 200 BHp / Tonne 4lb Li Battery, RPF1 17x9, 245 RE71R, RCE T2, OFH, OFT Stg 2, Berk Over+Front Pipe, , STI Eng/Trans Mts, PU Bushings, Forrester Liq-Liq oil cooler, Al Driveshaft, OSGiken Diff

12-19-2014, 10:26 PM	#6
200hp/tonne Senior Member Join Date: Apr 2013 Drives: Raven Fr-S Location: Santa Clara, CA Posts: 136 Thanks: 100 Thanked 84 Times in 37 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Forgot to add prices: Caliper : WIL-120-6811 $125 X2 = $250 Rotor Hats : WIL-170-9206 $125 X2 = $250 Rotor Discs : WIL-160-0277 $33 X2 = $66 Brake pads BP10 : WIL-150-8850K $42 Brake lines : WIL-220-9288 $60 Brackets : $100 TOTAL : $768 __________________ FR-S Mod target: 200 BHp / Tonne 4lb Li Battery, RPF1 17x9, 245 RE71R, RCE T2, OFH, OFT Stg 2, Berk Over+Front Pipe, , STI Eng/Trans Mts, PU Bushings, Forrester Liq-Liq oil cooler, Al Driveshaft, OSGiken Diff

12-19-2014, 10:10 PM	#5
CSG Mike Join Date: Jul 2012 Drives: S2000 CR Location: Orange County Posts: 14,562 Thanks: 8,942 Thanked 14,211 Times in 6,854 Posts Mentioned: 970 Post(s) Tagged: 14 Thread(s)	I love projects like this!

12-20-2014, 12:26 AM	#8
GotBRZ1691 Senior Member Join Date: Apr 2014 Drives: 2014 Subaru BRZ Limited 6smt Location: North Bay Posts: 810 Thanks: 478 Thanked 223 Times in 179 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	I have an ESAB plasma / water jet CNC cutter at work and have been thinking about this for awhile now. This and license plate relocation kits. Cool Project. If willing to share design I could get literally hundreds of these made next week. Because of the holidays we have a production shutdown and are only doing projects at work.

12-20-2014, 12:45 AM	#9
200hp/tonne Senior Member Join Date: Apr 2013 Drives: Raven Fr-S Location: Santa Clara, CA Posts: 136 Thanks: 100 Thanked 84 Times in 37 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Here is a snapshot of my design. Just replace the 8mm holes by 10mm and the 10mm holes by 12mm and you shall have a perfect part. I am not in the business of making these brackets, not by any means. I had a shop near work make them for me, so i can get them made again for anyone who wants a pair. __________________ FR-S Mod target: 200 BHp / Tonne 4lb Li Battery, RPF1 17x9, 245 RE71R, RCE T2, OFH, OFT Stg 2, Berk Over+Front Pipe, , STI Eng/Trans Mts, PU Bushings, Forrester Liq-Liq oil cooler, Al Driveshaft, OSGiken Diff

12-20-2014, 02:41 AM	#11
Pooverdam Member Join Date: Nov 2012 Drives: Whiteout 6MT FRS Location: MA Posts: 95 Thanks: 123 Thanked 62 Times in 26 Posts Mentioned: 6 Post(s) Tagged: 2 Thread(s)	subbed. Would be interested in some brackets.

12-20-2014, 07:20 AM	#14
Panman Senior Member Join Date: Jun 2012 Drives: 86 GTS Location: Brisbane Australia Posts: 706 Thanks: 141 Thanked 275 Times in 176 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	Stopping performance vs Std Brakes?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Inexpensive Exhaust!	Squido3J	Engine, Exhaust, Transmission	26	12-29-2014 01:39 AM
Inexpensive shocks dyno'd...	CSG Mike	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	60	03-09-2014 07:59 PM
Inexpensive wheel to fit Sprint Kit.	Captain Snooze	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	33	05-30-2013 11:04 AM
Inexpensive spare wheel	Captain Snooze	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	1	07-05-2012 07:36 AM
Inexpensive NA power increase; how much?	rice_classic	Engine, Exhaust, Transmission	4	06-18-2012 08:19 PM

User Name		Remember Me?
Password