EcuTek Flash finished but now it shows only a Partial Flash...

[Cross]

So I decided to load the new Racerom features and a change to my tune tonight before I left work. Everything goes as normal, load the tune everything goes as it normally does but when I got to start the car nothing...

So I go to check the tune and it askes me to relicense it as its only a partial flash....

So here I am sitting at work stuck and I cannot reflash my PCM nor revert back to stock... I am just stuck.... The need to reflash a PCM when an issue happens has to have come up before, who has experienced this? I could use some insight.

[jamesm]

Select the vehicle ecu manually (not with detect vehicle) and flash again. It'll pop up to confirm the selected rom is correct then flash as normal. Autorecovery

[jamesm]

Also make sure you have the software up to date before loading in the new feature file and flashing, if possible.

[Cross]

Originally Posted by jamesm

Select the vehicle ecu manually (not with detect vehicle) and flash again. It'll pop up to confirm the selected rom is correct then flash as normal. Autorecovery

I tried that it asked me for another license....

[Cross]

I checked earlier but I will check again right now.

Everything is up to date.

[jamesm]

That's weird it's never asked me for another license before, usually just flashes on. @EcuTek?

[Cross]

There are the screen shots of each step... it will not reflash....

[Cross]

I tried going back to OFT but that doesn't work because I have to have the stock Rom in place... great I am stuck.

[Cross]

http://www.ft86club.com/forums/showthread.php?t=54438

This user had a very similar problem and says @EcuTek went in through Recovery mode. @jamesm would you happen to know how to get into recovery mode?

[Xero-Limit]

Contact your master tuner if you haven't already. That would be the quickest way to get a license thrown on there so you can attempt again.

[Cross]

Originally Posted by moto-mike

Contact your master tuner if you haven't already. That would be the quickest way to get a license thrown on there so you can attempt again.

Yeah he is not answering... and he is not a member here anymore....

[Xero-Limit]

Originally Posted by Cross

Yeah he is not answering... and he is not a member here anymore....

Well that's a problem. Check your PM in about one minute.

[Shiv@Openflash]

Originally Posted by Cross

I tried going back to OFT but that doesn't work because I have to have the stock Rom in place... great I am stuck.

The reason your OFT won't write to the ecu is due to Ecutek's "overwrite protection" which changes the security algorithms so that only Ecutek software can write to the ECU. Not even the dealership can recover your ECU at this point

You'll need to use the ecutek software to flash a ecutek "stock" file to your ECU to restore original factory security algorithms.

[Cross]

Originally Posted by shiv@vishnu

The reason your OFT won't write to the ecu is due to Ecutek's "overwrite protection" which changes the security algorithms so that only Ecutek software can write to the ECU. Not even the dealership can recover your ECU at this point

You'll need to use the ecutek software to flash a ecutek "stock" file to your ECU to restore original factory security algorithms.

Thats what I normally have to o but since I can't flash it at all that leaves me well... stuck.

But a huge thanks to Mike, it looks like he may be able to help me out!!