10/16 Tactrix Logging - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Roadcone · 10-28-2016, 06:36 PM

I've spent the better part of this afternoon googling and reading. I've found a LOT of information prior to 2015 that basically says we can log with ODB2 standard parameters but unless we know the memory locations AND log to an sd card in a tactrix openport 2.0 that we are basically out of luck.

Is this still the case?

My background for "tuning" has been 04 Mustang GT on DeltaForce/Sniper Commando tuning and HPTuners on a 2010 cobalt SS/TC(keep it together at 21+ psi for 450+mile day long mountain drives) along with some various LS1 4th gen F-bodys.

Currently I've got EcuFlash, RomRaider 0.5.9 RC3 along with some random files i've ran across during my days adventure. OTS files, "subaru stable" definitions and currently i have my managed to pull my personal cars tune just to have a baseline.

Tell me where i'm wrong and if things have progressed.

phrosty · 10-28-2016, 08:47 PM

There's a huge tactrix thread.

aagun · 10-28-2016, 09:07 PM

same logging . op2 or OFT . u need to get carrnt rom address.

steve99 · 10-29-2016, 12:23 AM

Yes unfortunatly you will need to know the parameter ram addresses for your rom calid to use tactrix logging.

Other option is to use toyots techstream, but its a bit slow update rate

or buy a copy of brzedit it has rearly good logging for all rom calid

ztan · 11-01-2016, 08:32 PM

Quote:

Originally Posted by Roadcone

I've spent the better part of this afternoon googling and reading. I've found a LOT of information prior to 2015 that basically says we can log with ODB2 standard parameters but unless we know the memory locations AND log to an sd card in a tactrix openport 2.0 that we are basically out of luck.

Is this still the case?

My background for "tuning" has been 04 Mustang GT on DeltaForce/Sniper Commando tuning and HPTuners on a 2010 cobalt SS/TC(keep it together at 21+ psi for 450+mile day long mountain drives) along with some various LS1 4th gen F-bodys.

Currently I've got EcuFlash, RomRaider 0.5.9 RC3 along with some random files i've ran across during my days adventure. OTS files, "subaru stable" definitions and currently i have my managed to pull my personal cars tune just to have a baseline.

Tell me where i'm wrong and if things have progressed.

You still need RAM addresses for a particular cal_id.

If you can let us know what your cal_id is, someone might have RAM addresses available for you. Td-d seems to be able to diassemble these quite quickly, I sometimes have time to pull parameters out.

email me esltan@yahoo.com with a copy of your stock ROM and what RAM parameters you want.

10-28-2016, 06:36 PM	#1
Roadcone StreetKart Join Date: Jul 2013 Drives: 2014 Scion FR-S Monogram Location: Upstate, SC Posts: 477 Thanks: 43 Thanked 181 Times in 111 Posts Mentioned: 10 Post(s) Tagged: 1 Thread(s)	10/16 Tactrix Logging I've spent the better part of this afternoon googling and reading. I've found a LOT of information prior to 2015 that basically says we can log with ODB2 standard parameters but unless we know the memory locations AND log to an sd card in a tactrix openport 2.0 that we are basically out of luck. Is this still the case? My background for "tuning" has been 04 Mustang GT on DeltaForce/Sniper Commando tuning and HPTuners on a 2010 cobalt SS/TC(keep it together at 21+ psi for 450+mile day long mountain drives) along with some various LS1 4th gen F-bodys. Currently I've got EcuFlash, RomRaider 0.5.9 RC3 along with some random files i've ran across during my days adventure. OTS files, "subaru stable" definitions and currently i have my managed to pull my personal cars tune just to have a baseline. Tell me where i'm wrong and if things have progressed. __________________ TRD\|Verus Engineering\|Titan7\|DEZOD Motorsports\|JDL Auto Design

10-28-2016, 08:47 PM	#2
phrosty Senior Member Join Date: Apr 2013 Drives: 2013 FR-S Location: Seattle Posts: 806 Thanks: 202 Thanked 321 Times in 199 Posts Mentioned: 18 Post(s) Tagged: 1 Thread(s)	There's a huge tactrix thread. __________________ 2013 Whiteout 6AT FR-S \| Perrin Inlet Tube + 2.75" CAI \| OpenFlash Header \| P&L Catback \| 4.88 Final Drive \| Dialed in OFT 2.0x Stage 2 E85 \| 18x8 Enkei Raijin + 225/40 Michelin Pilot Super Sport \| 17x7 Stock + 215/45 Michelin X-Ice Xi-2

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tactrix EcuFlash Info for BRZ 86 FRS Rom flash update and logging	steve99	Software Tuning	1093	05-16-2025 10:38 AM
Tactrix 2.0 + CNT UEL headers	ort895	Engine, Exhaust, Bolt-Ons	9	07-27-2017 02:00 AM
Looking for a Tactrix 2.0	Keenercarguy	Want-To-Buy Requests	2	10-16-2016 04:12 AM
Problem with Tactrix OpenPort Logging	Shady195	Software Tuning	6	05-28-2015 06:52 AM
Tactrix cable	regal	Engine, Exhaust, Bolt-Ons	4	10-23-2014 10:47 PM

10-28-2016, 09:07 PM	#3
aagun Senior Member Join Date: Nov 2012 Drives: 86 Location: uae Posts: 403 Thanks: 202 Thanked 67 Times in 56 Posts Mentioned: 10 Post(s) Tagged: 0 Thread(s)	same logging . op2 or OFT . u need to get carrnt rom address.

10-29-2016, 12:23 AM	#4
steve99 Banned Join Date: Dec 2013 Drives: FT86 Location: Australia Posts: 7,996 Thanks: 1,035 Thanked 4,992 Times in 2,983 Posts Mentioned: 598 Post(s) Tagged: 2 Thread(s)	Yes unfortunatly you will need to know the parameter ram addresses for your rom calid to use tactrix logging. Other option is to use toyots techstream, but its a bit slow update rate or buy a copy of brzedit it has rearly good logging for all rom calid

User Name		Remember Me?
Password