10/16 Tactrix Logging
 

I've spent the better part of this afternoon googling and reading. I've found a LOT of information prior to 2015 that basically says we can log with ODB2 standard parameters but unless we know the memory locations AND log to an sd card in a tactrix openport 2.0 that we are basically out of luck.

Is this still the case?

My background for "tuning" has been 04 Mustang GT on DeltaForce/Sniper Commando tuning and HPTuners on a 2010 cobalt SS/TC(keep it together at 21+ psi for 450+mile day long mountain drives) along with some various LS1 4th gen F-bodys.


Currently I've got EcuFlash, RomRaider 0.5.9 RC3 along with some random files i've ran across during my days adventure. OTS files, "subaru stable" definitions and currently i have my managed to pull my personal cars tune just to have a baseline.


Tell me where i'm wrong and if things have progressed.

There's a huge tactrix thread. :search:

same logging . op2 or OFT . u need to get carrnt rom address.

Yes unfortunatly you will need to know the parameter ram addresses for your rom calid to use tactrix logging.

Other option is to use toyots techstream, but its a bit slow update rate

or buy a copy of brzedit it has rearly good logging for all rom calid

You still need RAM addresses for a particular cal_id.

If you can let us know what your cal_id is, someone might have RAM addresses available for you. Td-d seems to be able to diassemble these quite quickly, I sometimes have time to pull parameters out.

email me esltan@yahoo.com with a copy of your stock ROM and what RAM parameters you want.