retain factory aux port - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

rsingh · 10-23-2015, 06:22 AM

out of the factory usb and aux port there is two cables that come out of it one for usb and the other for aux

but in order to convert that cable to a standard aux cable can you just cut and solder the 5 pin servo cable to an aux cable? would anyone know what wires colour wires solder to what? its kindof like what the guy did with an aux cable here:

https://www.tacomaworld.com/threads/...d-unit.103041/

however his cable only has three cables and they are different colours

Mr.ac · 10-23-2015, 10:32 AM

I have no idea what you are trying to accomplish.

P3tras · 10-23-2015, 08:09 PM

Yes, it is possible. I did that on my BRZ. Just cannot tell exact wire colours, I recall some of them are even not used. It would be best to get multi-meter and check which pins connects where.

10-23-2015, 06:22 AM	#1
rsingh Member Join Date: Oct 2015 Drives: gt 86 Location: Australia Posts: 24 Thanks: 0 Thanked 4 Times in 3 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	retain factory aux port out of the factory usb and aux port there is two cables that come out of it one for usb and the other for aux but in order to convert that cable to a standard aux cable can you just cut and solder the 5 pin servo cable to an aux cable? would anyone know what wires colour wires solder to what? its kindof like what the guy did with an aux cable here: https://www.tacomaworld.com/threads/...d-unit.103041/ however his cable only has three cables and they are different colours

10-23-2015, 10:32 AM	#2
Mr.ac [insert cool phrase here] Join Date: Aug 2015 Drives: BRZ Premium Location: Central Coast CA Posts: 2,368 Thanks: 709 Thanked 1,559 Times in 930 Posts Mentioned: 30 Post(s) Tagged: 0 Thread(s)	I have no idea what you are trying to accomplish. __________________ New daily driver - Subaru BRZ Premium Weekend fun/track car - '91 MR2 Turbo Gen3 Old daily driver - '88 MR2 Supercharged

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which EL headers retain engine tray?	86_PWR	Engine, Exhaust, Transmission	8	07-30-2015 11:06 PM
Using Factory USB port with Aftermarket HU	ruskymx	Electronics \| Audio \| NAV \| Infotainment	93	06-10-2015 07:53 PM
Aftermarket race seats, retain passenger air bag function?	OICU812	Tracking / Autocross / HPDE / Drifting	3	05-19-2014 07:48 PM
DIY - Auto up/down disable (and retain door open indicator)	Imperius	DIY (Do-It-Yourself) Guides	4	02-10-2014 04:17 AM
Swap: factory 16s for factory 17s Sydney	MZ21	Australia Classifieds	10	07-29-2012 11:46 PM

10-23-2015, 08:09 PM	#3
P3tras Senior Member Join Date: Nov 2014 Drives: Subaru BRZ '13 WRB Location: Lithuania Posts: 202 Thanks: 33 Thanked 92 Times in 56 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Yes, it is possible. I did that on my BRZ. Just cannot tell exact wire colours, I recall some of them are even not used. It would be best to get multi-meter and check which pins connects where.

User Name		Remember Me?
Password