How to wire int the reverse light?

[Naeblis]

Does anyone know how to wire into the reverse light power on the BRZ? I bought a [ame="http://smile.amazon.com/Wireless-Transmitter-Receiver-Vehicle-Backup/dp/B008Z9E4DW/ref=cm_cd_al_qh_dp_t"]wireless transmitter/receiver[/ame] to see how well it would work instead of running a cable through the car for the backup camera. But I'm not sure how to tie the transmitter into the reverse light power so it'll turn on when it's in reverse

[RickyBobby]

Will this even work if you wire it into the reverse light? Read the section Camera Detect: http://ae64.com/Rear-camera-16p-operation.htm

It's not difficult to run the camera wire to the HU. See my post here: http://www.ft86club.com/forums/showp...5&postcount=20
If you purchase a camera that will run on 6V, like a genuine Rydeen, then all you would need is SVXdc's Bypass wire harness. http://ae64.com/Rear-camera-16-pin.htm You do not need a reverse trigger wire with a BRZ.