How to wire int the reverse light?
 

Does anyone know how to wire into the reverse light power on the BRZ? I bought a [ame="http://smile.amazon.com/Wireless-Transmitter-Receiver-Vehicle-Backup/dp/B008Z9E4DW/ref=cm_cd_al_qh_dp_t"]wireless transmitter/receiver[/ame] to see how well it would work instead of running a cable through the car for the backup camera. But I'm not sure how to tie the transmitter into the reverse light power so it'll turn on when it's in reverse

Will this even work if you wire it into the reverse light? Read the section Camera Detect: http://ae64.com/Rear-camera-16p-operation.htm

It's not difficult to run the camera wire to the HU. See my post here: http://www.ft86club.com/forums/showp...5&postcount=20
If you purchase a camera that will run on 6V, like a genuine Rydeen, then all you would need is SVXdc's Bypass wire harness. http://ae64.com/Rear-camera-16-pin.htm You do not need a reverse trigger wire with a BRZ.