F20P adv multiplier=0

[pym19109]

Hi every one, I'm from Thailand.
First I have to tell you I'm a noob.

My car is F20P completely stock and I flashed OFT Stage2 EL E85 last week.
Now I'm running 2nd tank of E85.
After read some thread in this forum I saw from somewhere adv multiplier should be 1 but mine is 0 all the time.

This is my data log from this morning.
http://datazap.me/u/shirokuma/log-14...4?log=0&data=1

Dose adv multiplier=0 is serious problem? and if yes what is the effect?
What should I do to fix this problem?
Please advise me.
Thank you.

[steve99]

It would be a serious issue if the IAM was actually 0 , but its just a logging issue with that rom calid :-)




your KC Learned appears to be logging correctly as does ignition advance.


If IAM was rearly 0 then KC Learned would never get above zero either and your ignition advance would be about 6 degrees less over 4000 rpm.

[pym19109]

Originally Posted by steve99

It would be a serious issue if the IAM was actually 0 , but its just a logging issue with that rom calid :-)




your KC Learned appears to be logging correctly as does ignition advance.


If IAM was rearly 0 then KC Learned would never get above zero either and your ignition advance would be about 6 degrees less over 4000 rpm.

Thank you again Steve.