|
||||||
| Engine, Exhaust, Transmission Discuss the FR-S | 86 | BRZ engine, exhaust and drivetrain. |
 |
|
|
Thread Tools | Search this Thread |
07-11-2018, 02:51 PM
|
#1 |
|
Member
Join Date: Jun 2015
Drives: 2013 BRZ
Location: Annapolis, MD
Posts: 82
Thanks: 18
Thanked 13 Times in 6 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Coolant temps with Jackson radiator?
I just got out for the first test run after installing the Jackson Racing combo radiator / oil cooler and an Innovate oil pressure gauge on a stock 2013 BRZ (no tune, no bolt-ons). Do these numbers look reasonable? Coolant temps are from Kiwi ODB-II, pressure is from innovate gauge. It was 94 deg out during the test.
idle - hot: 190 deg, 10-12 psi 2500-3500 RPM @ ~40 mph in town: 192 deg, 50-ish psi 6000 rpm @70 mph for 3 miles: 208 deg, 100-ish psi 75 mph in 6th, 198 deg 80-ish psi oil pressures are rough guesses from memory, so they have fairly wide error bars on them. Even so, does that seem in the ball park? thanks! |
|
|
|
07-11-2018, 04:26 PM
|
#2 |
Join Date: Jul 2012
Drives: S2000 CR
Location: Orange County
Posts: 14,562
Thanks: 8,942
Thanked 14,211 Times in 6,854 Posts
Mentioned: 970 Post(s)
Tagged: 14 Thread(s)
|
That would be well within normal operating temperature yes.
Oil pressure will vary with rpm and temp. |
|
|
|
| The Following User Says Thank You to CSG Mike For This Useful Post: | dstrout (07-11-2018) |
|
|
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Adjusting radiator fan temps | ML | Software Tuning | 44 | 04-16-2020 09:44 PM |
| Coolant Temps Running High | Dezoris | Tracking / Autocross / HPDE / Drifting | 43 | 09-29-2016 12:58 PM |
| Coolant Temps WAY TOO HIGH | itsjustdavep | Mechanical Maintenance (Oil, Fluids, Break-In, Servicing) | 45 | 08-25-2016 02:41 PM |
| Dots in coolant(open radiator cap) | Tank42 | Scion FR-S / Toyota 86 GT86 General Forum | 18 | 01-26-2016 11:52 PM |
| Normal Engine Coolant Temps? | Dezoris | Engine, Exhaust, Transmission | 1 | 04-05-2013 04:17 PM |
