OEM reverse camera with Aftermarket HU - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Peanuts · 08-13-2021, 05:04 AM

Hi guys just some context:

I've installed the Pioneer DMH-A4450BT into my 2015 86 GTS, and have everything else working except the OEM camera currently.

I have the following adapter which is meant to adapt the reverse camera into RCA that I can use with my head unit:
https://aerpro.com/apvty04

The problem is it does nothing. I hit the pins in the 4-pin connector with a multimeter and it seems they don't do anything at all? As far as I thought, this should have just been a plug and play adapter

I've had a look around for pin-outs and diagrams and can't find many that even mention this 4-pin plug, except for these adapters. In my stock HU I can see it was plugged in there so I'd assume it does something. Looking at pin-outs for other plugs, it looks like the camera power and video might be in the big 28-pin plug that I don't have hooked up to anything?

Any help would be appreciated as it's the only thing I need to sort out

EDIT: Not sure if I can delete my own thread, but I believe my issues could be caused by not having the reverse signal wire hooked up correctly, which may power the camera and get everything working. I'm going to try see if this is the case tomorrow

soundman98 · 08-13-2021, 10:07 PM

yea, you need the reverse wire connected, or provide alternative power to the camera, and signaling to the head unit to make it all work.

nextcar · 08-14-2021, 02:02 AM

IIRC, the OEM camera is six volts, make sure.voltage levels are compatible with your aftermarket system…

I went the other direction- installed a aftermarket camera with my 2013 OEM stereo and it required a relay to source a 12 volt circuit for the camera.

Quote:

Originally Posted by Peanuts

Hi guys just some context:
I've installed the Pioneer DMH-A4450BT into my 2015 86 GTS, and have everything else working except the OEM camera currently.

I have the following adapter which is meant to adapt the reverse camera into RCA that I can use with my head unit:
https://aerpro.com/apvty04

The problem is it does nothing. I hit the pins in the 4-pin connector with a multimeter and it seems they don't do anything at all? As far as I thought, this should have just been a plug and play adapter

I've had a look around for pin-outs and diagrams and can't find many that even mention this 4-pin plug, except for these adapters. In my stock HU I can see it was plugged in there so I'd assume it does something. Looking at pin-outs for other plugs, it looks like the camera power and video might be in the big 28-pin plug that I don't have hooked up to anything?

Any help would be appreciated as it's the only thing I need to sort out

EDIT: Not sure if I can delete my own thread, but I believe my issues could be caused by not having the reverse signal wire hooked up correctly, which may power the camera and get everything working. I'm going to try see if this is the case tomorrow

08-13-2021, 05:04 AM	#1
Peanuts Member Join Date: May 2021 Drives: 2015 Toyota 86 GTS Location: NSW, Australia Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	OEM reverse camera with Aftermarket HU Hi guys just some context: I've installed the Pioneer DMH-A4450BT into my 2015 86 GTS, and have everything else working except the OEM camera currently. I have the following adapter which is meant to adapt the reverse camera into RCA that I can use with my head unit: https://aerpro.com/apvty04 The problem is it does nothing. I hit the pins in the 4-pin connector with a multimeter and it seems they don't do anything at all? As far as I thought, this should have just been a plug and play adapter I've had a look around for pin-outs and diagrams and can't find many that even mention this 4-pin plug, except for these adapters. In my stock HU I can see it was plugged in there so I'd assume it does something. Looking at pin-outs for other plugs, it looks like the camera power and video might be in the big 28-pin plug that I don't have hooked up to anything? Any help would be appreciated as it's the only thing I need to sort out EDIT: Not sure if I can delete my own thread, but I believe my issues could be caused by not having the reverse signal wire hooked up correctly, which may power the camera and get everything working. I'm going to try see if this is the case tomorrow Last edited by Peanuts; 08-13-2021 at 07:53 AM. Reason: update to problem

08-13-2021, 10:07 PM	#2
soundman98 ProCrastinationConsultant Join Date: Sep 2013 Drives: '14 Ranger, '18 Tacoma 4Dr LB Location: chicago-ish Posts: 11,330 Thanks: 35,240 Thanked 13,675 Times in 6,782 Posts Mentioned: 98 Post(s) Tagged: 0 Thread(s)	yea, you need the reverse wire connected, or provide alternative power to the camera, and signaling to the head unit to make it all work. __________________ "The time you enjoy wasting is not wasted time"

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help with reverse camera	melvin_213	Electronics \| Audio \| NAV \| Infotainment	23	05-20-2020 12:23 AM
Need help with installing Camera Source's reverse camera for 2013 FRS	Ann13	DIY (Do-It-Yourself) Guides	9	09-30-2019 08:39 PM
Reverse Camera	Emissary_of_Pain	Electronics \| Audio \| NAV \| Infotainment	5	10-27-2017 11:13 AM
OEM Reverse Camera and aftermarket head unit	map26	Electronics \| Audio \| NAV \| Infotainment	0	07-27-2015 10:47 AM
Reverse camera?	dorkymork	BRZ First-Gen (2012+) — General Topics	28	05-21-2012 11:21 AM

User Name		Remember Me?
Password